ASTRATEC TOPD1 Use and care manual
Re-tuning: ASTRATEC Freeview Box
This guide can be used to help you re-tune any of the following products with the remote control below:
1) Press the Setup
button
Make sure your box is on and press 80
for the BBC News channel
2) Use the down arrow
button to select
System Setup on the
fth line of the menu
and press the OK
button
3) Use the down arrow
button to select
Channel Setup on
the second line of the
menu and press the
OK button
4) Use the down arrow
button to select
Channel Tuning on
the third line of the
menu and press the
OK button
5) Select Full Scan
Replace Existing
Channels and
press the OK
button
8 Steps
(Steps 1-5)
8 Steps
(Steps 1-5)
Page 1 of 2Page 1 of 2
Manufacturer Helpline: 020 8847 8601 email: contact@digitalvisiontv.com
Astratec TOPD1, Matsui TOPD2
*This process may affect any saved information stored on your product, including your favourites list.
Please consult your instruction manual or contact the manufacturer using the details above.
Re-tuning: ASTRATEC Freeview Box
8 Steps
(Steps 6-8)
8 Steps
(Steps 6-8)
Page 2 of 2Page 2 of 2
Manufacturer Helpline: 020 8847 8601 email: contact@digitalvisiontv.com
7) Completion Screen
No action required
9) Select preferred
language and press
OK button
6) Scanning Screen
No action required
8) BBC1 will
automatically play
out
No action required
You have completed the
procedure and can continue
viewing digital channels.
*This process may affect any saved information stored on your product, including your favourites list.
Please consult your instruction manual or contact the manufacturer using the details above.
Table of contents
