ATD Tools ATD-30321 User manual

ATD-30321
20” Tilting Pedestal Drum Fan
Owner’s Manual
Features:
7KUHHVSHHGHQHUJ\HIILFLHQWPRWRU
%DODQFHGDOXPLQXPEODGHGHVLJQSURYLGHVHYHQDLUIORZDQGTXLHWRSHUDWLRQ
'XUDEOHEDOOEHDULQJPRWRU
$XWRPDWLFVKXWRIIIHDWXUHSUHYHQWVRYHUKHDWLQJ
'XUDEOHEODFNSRZGHUFRDWLQJILQLVK
$GMXVWDEOHIDQKHLJKW
5RWDU\VZLWFK
IWJURXQGHGFRUG
Specifications:
9+]:
+S0RWRU
8SWR&)0
F(7/OLVWHG
2QH<HDU/LPLWHG:DUUDQW\
0DGHLQ&KLQDWR$7'7RROV,QF6SHFLILFDWLRQV
9LVLWXVDWZZZDWGWRROVFRP
$7'BUHYB

Intended Use:
This product is intended for indoor residential, office, industrial, or other commercial
applications. Use only with electrical wiring that is in good working order and that
meets applicable codes and ordinances. If you have any questions whether your
wiring is adequate, consult a qualified electrician.
While using your fan, you should follow the IMPORTANT INSTRUCTIONS listed below.
As part of those instructions, we have used the word "WARNING" to indicate the
level of hazard: WARNING indicates a hazard which, if not avoided, could result in
injury or death.
IMPORTANT INSTRUCTIONS
As with all electrical appliances, basic safety precautions should always be followed
to reduce the risk of electric shock, fire, or injury to persons, including the following
precautions:
ЬRead all the instructions before using this fan.
ЬUse this fan only as described in this manual. Any other use not recommended by
the manufacturer may cause electrical shock, fire or injury to persons.
ЬDo not operate the fan with a damaged power cord or after the fan malfunctions
or has been dropped in any manner.
ЬUse of extreme caution is necessary when any fan is used by or near children,
disabled persons or pets and whenever the fan is left operating unattended.
ЬDo not place the fan on an unlevel, uneven or any surface which might allow fan
to tip or fall.
ЬFor proper operation, fan should be placed on a smooth, no
n- combustible, level
surface.
ЬAlways unplug fan when not in use, when moving from place to place, when
assembling or disassembling parts, and before cleaning.
ЬThe use of attachments, not recommended or sold by the manufacturer, may
cause hazards.
ЬDo not use outdoors.
ЬDo not use fan in window. Rain may cause electrical hazard (for non-window
models).
ЬDo not operate the fan with blade guards or any safety device removed.
ЬAvoid the use of extension cords due to risk of fire. If an extension cord must be
used, the cord must be minimum 14 AWG and rated not less then 1875 watts.
ЬDo not run power cord under carpeting. Do not cover cord with throw rugs,
runners or the like. Arrange cord away from traffic area where it will not be tripped
over.
ЬDo not insert or allow any object to enter any openings on the fan. Doing so may
cause electric shock and/or fire hazard. Avoid contact with moving parts.
ЬChildren should be supervised to ensure they do not play with the appliance.

READ & SAVE THESE INSTRUCTIONS
WARNING: Shock Hazard
Use your fan only in dry environments. This fan is not intended for use in a bathroom,
laundry area, or similar locations, or near sinks, washing machines, swimming pools
or other sources of water. Never locate fan where it may fall into a bathtub or other
water receptacle. Do not use in damp environments such as flooded basements.
WARNING: Hot Surfaces
Do not touch fan motor when in use. This motor is hot when in use, to avoid burns,
do not let bare skin touch hot surfaces.
WARNING: Fire Hazard
Fans have arcing or sparking parts inside. Do not use near combustible materials or
flammable gases or sources of heat. DO NOT USE in areas where gasoline, paint or
flammable materials are used or stored. To prevent a possible fire, do not block air
intakes or exhaust in any manner.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as
this may cause an electric shock, fire, or damage the fan.
WARNING: Electrical Shock Hazard
Do not use with damaged cord or plug. Use with adequate electrical system that is up
to code.
CAUTION: to prevent electric shock, this product has a three prong grounded plug
that must be inserted into a matching properly grounded outlet to reduce the risk of
electrical shock. Do not attempt to defeat this safety feature.
WARNING: to reduce the risk of fire or electric shock, do not use this product with
any solid-state speed control device.
operateanyfanwithadamagedcordorplugorafterfanmalfunctions,has
been dropped or damaged in any manner.
Do not operate fan with a broken blade, safety cage or any visual imperfections.
Disconnect power before servicing. For repairs covered under warranty, see warranty
statement.
Do not

run power cord under carpeting. cover cord with throw rugs,
runners or the like. Arrange cord away from traffic area where it will not be tripped
over. Avoid the use of extension cords due to risk of fire. If an extension cord must be
used, the cord must be minimum 14 AWG and rated not less then 1875 watts. Do not
use an extension cord unless the plug can be completely inserted into its receptacle.
Unplug the fan when not in use. Do not operate fan with its ventilation obstructed.
CAUTION: This fan is equipped with an automatic reset limit control. If fan overheats
for any reason this limit control will open and will stop the fan
CAUTION: Read and follow all instructions before operating fan. Do not use fan if any
part is damaged or missing.
WARNING:
1. To reduce the risk of fire or electric shock, do not use this fan with any solid state
speed control device.
2. This appliance has a ground plug which is intended to fit in an outlet only one way.
If this does not fit outlet contact a qualified electrician. Do not attempt to bypass
this procedure.
3. This product is for indoor use only.
4. Unplug from electrical supply source before cleaning.
5. If the power cord is damaged, contact your local service cent re or a qualified
electrician to install an appropriate replacement cord to prevent any injury or
damage.
6. Children should be supervised to ensure that they do not play with the appliance
Rules for Safe Operation:
1. Never insert fingers, pencils, or any other object through the guard when fan is
running.
2. Disconnect the fan when moving from one location to another.
3. Disconnect the fan when removing grilles for cleaning.
4. Be sure fan is on a stable surface when operating to avoid overturning.
5. Do not use fan in window. Rain may create electrical hazard.
6. The fan is for commercial use only.
7. Do not leave the fan running unattended.
Operating Instructions:
1. Adjust the desired speed by rotating the switch:
0 - Stop, 1 -Low, 2 -Medium, 3 -High.
2. Adjust the tilt angle by rotating the guard. Loosen the knobs before rotating and
tighten after rotation is set.
Do not Do not

Assembly Instructions:
1. align the screw hole with the screw, rubber ring, and the hole on
the support frame, then insert the wrench knob to tighten them up. (fig.1,2.)
Fig.1 Fig.2
2. Align the holes on the bottom of the U-shaped bracket with clamping support, then insert the
screw with washer, tighten up with washer and nut. (fig.3, 4)
Fig.3 Fig.4
3. Insert the end with screw holesof the inner pole into the clamping support. Insert the short
screw through the holes on the clamping support and inner pole with washers. Tighten up with the
washer and nut. (fig.5,6Ϳ^ŚŽǁŶĐŽŵƉůĞƚĞŝŶĮŐϳ
Fig.5 Fig.6 Fig.7
On both sides of the fan head
VFUHZ KROH
VXSSRUW IUDPH
UXEEHU ULQJ
ZUHQFK NQRE
VFUHZ

4. Loosen the L-shaped bolt and big washer on the outer pole, insert the end of the outer pole
into the base hole.(see fig. 8, 9)
Fig.8 Fig.9
5. Align the hole on the base with the one on the weight. Then insert the L-shap
ed bolt through
the holes with the big washer. (see fig.10,11)
Fig.10 Fig.11
6. Inert the decorative cap through the outer pole.
7. Inert the inner pole into the outer pole and tighten up the screw on the plastic holder.
(see fig.12, 13)
IMPORTANT: THERE IS A SPRING COIL INSIDE THE OUTER HOLE. DONOTTAKEITOUTDURING
ASSEMBLY.
8. Loosen the screw knob on the inner pole and adjust the fan to the height you want, then tighten
the screw knob. (see fig.14)
Fig.12 Fig.13 Fig.14
Weight
L-shaped
bolt
Big washer

Care and Maintenance
Cleaning: CAUTION-Before cleaning the fan be sure to disconnect power cord from the plug.
Clean the grille surface with a clean damp cloth. Do not use harsh chemical or abrasive cleaners.
DO NOT IMMERSE THE FAN OR ANY WIRES IN WATER. Replace front grille before fan use. Allow
fan to dry completely before use. Periodic grille cleaning with a vacuum will prevent dust build up.
The motor is sealed and does not require any interior maintenance, cleaning or lubrication.
Maintenance: The Internal motor bearings are permanently lubricated at the factory and do not
require any additional lubrication.
Repair: DO NOT OPERATE THE FAN WITHOUT THE GRILLE IN PLACE. DO NOT USE THE FAN IF IT
HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
Storage: Keep original carton for storage of the fan. Coil and tie the power cord to avoid damage
during storage.
Fuse Replacement:
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on
cord.
2. Open fuse cover by sliding open fuse access cover on top of attachment plug towards blades.
See Fig. 15.
3. Remove fuse carefully. Use a small tool to pry the end of the fuse from holder cavity. Be careful
not to break glass window. See Fig. 16.
4. Replace fuse. WARNING: Risk of fire. Replace fuse only with identical 2.5 or 5.0 Amp, 125 Volt
fuse (3.6mm x 10mm). Be sure fuse is properly seated within its cavity.
5. Close fuse cover by sliding it back to its original closed position. See Fig. 17.
Fig. 15 Fig. 16 Fig. 17
Tips: Do not overexert when replacing the fuse or damage may occur. If it is hard to close the
access cover, make sure the fuse is fully inserted.


47
8





4


7
8





ITEM# ORDERINGPART# PART DESCRIPTION ITEM# ORDERINGPART# PART DESCRIPTION
P57 )52N7G8$5'  P57 287(5P2/(
P57 %/$'( 4P574'(&25$7,NG&$P
P57 )$N6+528'  P57 %$6(
4P574:5(N&+KN2%  P57 :(,G+7
P57 5($5G8$5' 7P577%,G:$6+(5
P57 02725 8P578/6+$P('$'J8670(N76&5(:
7P57786:,7&+KN2%  P57 86+$P('%5$&K(7
8P57786:,7&+  P57 6&5(:
P57 &$P$&,725  P57 &/$0P,NG68PP257
 P57 P2:(5&25'  P57 N87
 P57 ,NN(5P2/(  P57 :$6+(5
 P57 6&5(:KN2%
REPLACEMENT PARTS
1RWDOOFRPSRQHQWVRIWKLVSURGXFWDUHUHSODFHPHQWLWHPVEXWDUHLOOXVWUDWHGDVDFRQYHQLHQWUHIHUHQFHIRUSRVLWLRQLQ
WKHDVVHPEO\VHTXHQFH:KHQRUGHULQJSDUWVJLYHPRGHOQXPEHUSDUWQXPEHUDQGGHVFULSWLRQ&DOO\RXUGLVWULEXWRU
IRUFXUUHQWSULFLQJ

WARRANTY
1 YEAR LIMITED WARRANTY
THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
385&+$6(')520BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
'$7(385&+$6('BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
,192,&(5(&(,37180%(5BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
<RXU$7'LVZDUUDQWHGIRUDSHULRGRIPRQWKVIURPWKHRULJLQDOSXUFKDVHGDWH

)RUDSHULRGRIRQH\HDUIURP\RXUSXUFKDVHGDWH$7'7RROV,QFZLOOUHSDLURUUHSODFHDWLWVRSWLRQZLWKRXWFKDUJH\RXU
$7'SURGXFWLILWZDVSXUFKDVHGQHZDQGWKHSURGXFWKDVIDLOHGGXHWRDGHIHFWLQPDWHULDORUZRUNPDQVKLSZKLFK\RXH[SHULHQFHG
GXULQJQRUPDOXVHRIWKHSURGXFW7KLVOLPLWHGZDUUDQW\LV\RXUH[FOXVLYHUHPHG\
7RDFFHVVWKHEHQHILWVRIWKLVZDUUDQW\FRQWDFW\RXUVXSSOLHURUSRLQWRIVDOHGLUHFWO\<RXPD\EHDGYLVHGWRUHWXUQWKHSURGXFW
XQGHUZDUUDQW\IUHLJKWSUHSDLGWR\RXUVXSSOLHUIRUZDUUDQW\GHWHUPLQDWLRQ
,IWKLV$7'SURGXFWLVDOWHUHGDEXVHGPLVXVHGPRGLILHGRUXQGHUJRHVVHUYLFHE\DQXQDXWKRUL]HGWHFKQLFLDQ\RXUZDUUDQW\ZLOO
EHYRLG:HDUHQRWUHVSRQVLEOHIRUGDPDJHWRRUQDPHQWDOGHVLJQV\RXSODFHRQWKLV$7'SURGXFWDQGVXFKRUQDPHQWDWLRQVKRXOG
QRWFRYHUDQ\ZDUQLQJVRULQVWUXFWLRQVRUWKH\PD\YRLGWKHZDUUDQW\7KLVZDUUDQW\GRHVQRWFRYHUVFUDWFKHVVXSHUILFLDOGHQWVDQG
RWKHUDEUDVLRQVWRWKHSDLQWILQLVKWKDWRFFXUXQGHUQRUPDOXVH,WDOVRGRHVQRWFRYHUQRUPDOZHDULWHPVVXFKDVEXWQRWOLPLWHGWR
EUXVKHVEDWWHULHVGULOOELWVGULOOFKXFNVSDGVRUEODGHV
6XEMHFWWRWKHODZLQ\RXUVWDWH
<RXUVROHDQGH[FOXVLYHUHPHG\LVUHSDLURUUHSODFHPHQWRIWKHGHIHFWLYHSURGXFWDVGHVFULEHGDERYH
$7'LVQRWOLDEOHIRUDQ\LQFLGHQWDOGDPDJHVLQFOXGLQJEXWQRWOLPLWHGWRORVWSURILWVDQGXQIRUHVHHDEOHFRQVHTXHQFHV
7KHUHSDLUDQGUHSODFHPHQWRIWKLVSURGXFWXQGHUWKHH[SUHVVOLPLWHGZDUUDQW\GHVFULEHGDERYHLV\RXUH[FOXVLYHUHPHG\DQGLV
SURYLGHGLQOLHXRIDOORWKHUZDUUDQWLHVH[SUHVVRULPSOLHG$OORWKHUZDUUDQWLHVLQFOXGLQJLPSOLHGZDUUDQWLHVDQGZDUUDQWLHVRI
PHUFKDQWDELOLW\RUILWQHVVIRUDSDUWLFXODUSXUSRVHDUHGLVFODLPHGDQGLIGLVFODLPHULVSURKLELWHGWKHVHZDUUDQWLHVDUHOLPLWHGWR
RQH\HDUIURP\RXUGDWHRISXUFKDVHRIWKLVSURGXFW
6RPHVWDWHV¶ODZVGRQRWDOORZOLPLWHGGXUDWLRQVRQFHUWDLQLPSOLHGZDUUDQWLHVDQGVRPHVWDWHV¶ODZVGRQRWDOORZOLPLWDWLRQVRQ
LQFLGHQWDORUFRQVHTXHQWLDOGDPDJHV<RXVKRXOGFRQVXOWWKHODZLQ\RXUVWDWHWRGHWHUPLQHKRZ\RXUULJKWVPD\YDU\
>$IIL[UHFHLSWRULQYRLFHKHUHIRUVDIHNHHSLQJ@