Athletica Sport Systems Infinity Series User manual

Infinity Series™
01/2021
Athletica O&M manual

Thank you for purchasing the
Infinity Series™ dasher board system.
This manual details the recommended
maintenance schedule required to ensure optimal
performance of your arena system.
Warranty
This Athletica Sport Systems product is warranted to
be free of defects in materials and workmanship for
a period of 1 year from the date of purchase. Please
contact Athletica Sport Systems with any questions
about the performance of this product.
Contact Us
Canada and International
554 Parkside Drive. Waterloo ON Canada N2L 5Z4
519-747-1856
USA
720 Innovation Drive. Shakopee MN USA 55379
763-249-7465
Infinity Series™
Product Manual
554 Parkside Drive, Waterloo, Ontario, Canada N2L 5Z4 TEL [phone]
720 Innovation Drive, Shakopee, Minnesota, USA 55379 TEL [phone]

Infinity Series™
Product Manual
554 Parkside Drive, Waterloo, Ontario, Canada N2L 5Z4 TEL [phone]
720 Innovation Drive, Shakopee, Minnesota, USA 55379 TEL [phone]
Weekly Maintenance
1. Check attachment of polyethylene facing, and
caprail to aluminum framing. Tighten screws as
required.
2. Inspect gate swing for proper clearance. Adjust
as required.
3. Inspect gate latches for proper operation. Adjust
as required. Spray lubricant on the machine gate
latch and machine gate retractable flush bolts to
keep the threads and nish oiled.
4. Inspect door/panel frame facing alignment
(playing side). The smooth operation of all the
gates is dependent on the level and plumb of the
adjacent gate jambs and the adjacent boards.
5. Inspect all acrylic glass clips (if applicable),
and the J-hooks in them, to ensure the hooks are
tight. Tighten as needed to prevent glass clips
from dislodging.
6. Inspect Suction cups are all attached to the glass.
Monthly Maintenance
1. Check torque of floor anchors. Tighten as
required.
2. Visually inspect plumb of dasher boards.
Re-plumb as required.
3. Visually inspect aluminum framing for
deformation or cracks. Repair or replace as
required.
4. Inspect panel joints (playing side) for facing
alignment. Re-adjust/tighten as required.
5. Check torque of panel connection bolts.
Re-tighten as required.
6. Do regular cleaning of polyethylene and glass
facing for esthetics. Use mild detergent and
water. Wipe dry. Never use a solvent or abrasive
cleanser.
7. Inspect any steel hardware for start of corrosion.
Clean o rust and spray galvanize as required.
Wipe the tie rods with spray lubricant to protect
the nickel plating.
8. Lubricate gate hinges. Use a quality spray
lubricant on the gate hinges and all the moving
parts on the gate locking hardware.
9. Lubricate adjustable caster. Use quality grease on
the grease tting on the machine gate wheels,
with a grease gun.
10. Check torque of hardware fasteners. Tighten as
required.
11. Inspect threshold covers for wear. Replace as
required.
12. Inspect threshold covers for proper attachment
Tighten/fasten as required.
To schedule a maintenance or repair by authorized
service personnel, call Athletica Sport Systems Inc.,
toll-free: 1.877.778.5911 or contact us via email at
[email protected]om.

554 Parkside Drive, Waterloo, Ontario, Canada N2L 5Z4 TEL [phone]
720 Innovation Drive, Shakopee, Minnesota, USA 55379 TEL [phone]
athletica.com