attika Rais 500 User manual

Rais 500
POSITIV
OUTLINE
NEGATIV
INSTALLATIONSVEJLEDNING / INSTALLATIONSANLEITUNG / INSTALLATION GUIDE / NOTICE D’INSTALLATION /
NSTALLASJONSVEILEDNING / INSTALLATIONSANVISNING / ASENNUSOHJEET / INSTALLATIEHANDLEIDING
INSTALLATION MANUAL (UK)

GB
3 - EN
PRODUCTION NUMBER SHALL
BE STATED HERE

10
21-02-2023
GB
EN - 4
INSTALLATION INSTRUCTIONS
CONTENTS
Installation instructions 5
In general 5
Chimney 5
Technical data 6
Specifications 6
Dimensional sketches 7
Production number 11
Information plate 12
Installation 15
Delivery packaging 15
Choice of material for installation 16
Installation dimensions 500-1 17
Installation distance 500-1 18
Installation dimensions 500-2 19
Installation distance 500-2 20
Installation dimensions 500-3 21
Installation distance 500-3 22
Heat distributor 23
External air connection 24
Fitting the floor plate 26
Lubricating the hinges 27
Combustion chamber lining 28
Cleaning the flue 29
Additional convection openings 31
Spare parts 35
Performance declaration 37
Test certificate 38
EN
We are not responsible for typographical errors.
This manual applies to the following models:
Rais 500-1 Front model - Glass version
Rais 500-1 Front model - Classic version
Rais 500-2 Right model - Glass version
Rais 500-2 Right model - Classic version
Rais 500-2 Left model - Glass version
Rais 500-2 Left model - Classic version
Rais 500-3 3 Side model - Glass version
Rais 500-3 3 Side model - Classic version
Revision:
Date:

GB
5 - EN
INSTALLATION INSTRUCTIONS
Thank you for choosing your new RAIS or
ATTIKA product. This installation instructions
manual will ensure that your fireplace insert
is installed correctly and that it will provide
you with comfort and pleasure for many
years to come.
IN GENERAL
It is important to correctly install the
fireplace insert out of consideration for both
the environment and personal safety.
The installation must comply with all local
rules and regulations, including those that
refer to national and European standards.
A certified chimney sweeper should be
contacted before the installation is started.
No unauthorised alterations may be made to
the fireplace insert.
GENERAL INSTALLATION REQUIREMENTS
Before the fireplace insert may be put to use,
the installation must be reported to your
local chimney sweeper.
There must be a plentiful supply of fresh
air in the installation room to ensure good
combustion ifrequired, through anAirSystem
connection. Be aware that any mechanical air
extraction, for example a cooker hood, can
reduce the supply of air. Any air vent must be
positioned in a way that ensures the supply
of air cannot be blocked.
The fireplace insert has an air consumption
of 16 m3/h.
The floor structure must be able to support
the weight of the fireplace insert and a
chimney, if required. If the existing floor
structure does not meet this requirement,
suitable measures must be taken (e.g.
installation of a load distribution plate). If in
doubt, contact a building expert.
National and local regulations must be
complied with, including the size of the
non-flammable plate that must cover the
flammable floor in front of the fireplace insert
to protect the floor from fallen embers.
The fireplace insert must be positioned at a
safe distance from flammable material. Due
to risk of fire, flammable items (e.g. furniture)
may not be positioned closer to the fireplace
insert than the closest permitted distance
stated in the installation sections. When
deciding where to install your RAIS/ATTIKA
fireplace insert, you should think about being
able to heat other rooms in the home, so you
get the most out of your new fireplace insert.
After receiving your fireplace insert, please
check it for any defects.
CHIMNEY
The chimney must be tall enough to ensure
correct draught conditions, i.e. -12 pascal
to -18 pascal. If the recommended chimney
draught cannot be achieved, problems
from smoke escaping from the door may
arise when lighting the fire. We recommend
adapting the chimney to suit the smoke
outlet spigot. The smoke outlet spigot is 150
mm in diameter.
Ifthe draught is excessive, it is recommended
that you equip the chimney with a regulating
damper. If a regulating damper is fitted, you
must ensure that there is a free flow area
of at least 20 cm² at the closed regulating
damper.
Remember that there must be unobstructed
access to the access door on the chimney.
The length of the chimney, calculated from
the top of the fireplace insert should not
be less than 3 m and must be at least 80
cm above the roof ridge. If the chimney is
installed at the side of the house, the top of
the chimney must never be lower than the
roof ridge or the roof’s highest point.
Note that there are often national and local
regulations relating to houses with thatched
roofs.
The fireplace insert is suitable for connecting
to a shared flue but we recommend that the
in-feed is positioned so that there is a free-
height difference between them of at least
250 mm
INSTALLATION INSTRUCTIONS
Notice!
RAIS/ATTIKA recommends that the
fireplace insert is installed by an au-
thorised technician. Please ask your
dealer for further information.

GB
EN - 6
The fireplace insert is tested and approved by:
Danish Technological Institute
Teknologiparken Kongsvang Allé 29
8000 Aarhus C
Denmark
www.dti.dk
Tel.: [phone], Fax: [phone]
TECHNICAL DATA
SPECIFICATIONS
Danish Technological Institute ref.: 300-ELAB-2555-EN and 300-ELAB-2555-NS
RAIS 500-1
FRONT MODEL RAIS 500-2 RIGHT/LEFT MODEL RAIS 500-3
3 SIDE MODEL
Nominal output (kW) 5.6 5.6 5.6
Min./max. output (kW) 4–8* 4–8* 4–8*
Heating area (m2) 120 120 120
Fireplace insert width/depth/
height (mm) 720 X 427 X 480 699 X 427 X 480 678 X 427 X
479
Combustion chamber W x D x
H (mm) 545 X 280 X 200 ** 545 X 280 X 200 ** 545 X 280 X 200 **
Min. uptake (pascal) -12 -12 -12
Weight (kg) min., depending on
the model 102 99 96
Efficiency (%) 76 76 76
CO emission attributed to 13%
O2(%) 0.09 (1125 mg/ Nm³) 0.09 (1125 mg/Nm³) 0.09 (1125 mg/ Nm³)
NOx emission attributed to 13%
O2(mg/Nm³) 82 82 82
OGC emission attributed to 13%
O2(mg/Nm³) 67 67 67
Particle emission in accordance
with NS3058/3059 (g/kg) 2.89 2.89 2.89
Dust measurement in accord-
ance with DIN + 13% O2(mg/
Nm³)
10 10 10
Flue gas flow (g/s) 5.4 5.4 5.4
Flue gas temperature (°C) 289 289 289
Recommended amount of wood
(kg) when stoking the fire (Dis-
tributed between two logs, each
max. 24 cm)
1.4 1.4 1.4
Intermittent operation Stoking should
be done within 45
minutes
Stoking should
be done within 45
minutes
Stoking should
be done within
45 minutes
*Not verified by test.
**Max. load

17-0000-6550
R500 Front model, Glass
22-02-2023
n
98,5
360360
122*
n147
426
446
496
682
708
758
307
552
360
720
151
427**
151
480
427**
389
360
397
17-0000-6550
R500 Front model, Glass
22-02-2023
n
98,5
360360
122*
n147
426
446
496
682
708
758
307
552
360
720
151
427**
151
480
427**
389
360
397
17-0000-6550
R500 Front model, Glass
22-02-2023
n
98,5
360360
122*
n147
426
446
496
682
708
758
307
552
360
720
151
427**
151
480
427**
389
360
397
17-0000-6550
R500 Front model, Glass
22-02-2023
n
98,5
360360
122*
n147
426
446
496
682
708
758
307
552
360
720
151
427**
151
480
427**
389
360
397
17-0000-6550
R500 Front model, Glass
22-02-2023
n
98,5
360360
122*
n147
426
446
496
682
708
758
307
552
360
720
151
427**
151
480
427**
389
360
397
17-0000-6550
R500 Front model, Glass
22-02-2023
n
98,5
360360
122*
n147
426
446
496
682
708
758
307
552
360
720
151
427**
151
480
427**
389
360
397
GB
7 - EN
DIMENSIONAL SKETCHES
* AirSystem
** Interior dimensions
All dimensions are in mm.
500–1

17-0000-6552
R500 Right model, Glass
22-02-2023
n98,5
339**360
122*
n147
426
682
307
552
360
699**
151
427**
151
480
427**
389
n
160
446
496
696
721
307
290
430
416
391
394
17-0000-6552
R500 Right model, Glass
22-02-2023
n98,5
339**360
122*
n147
426
682
307
552
360
699**
151
427**
151
480
427**
389
n
160
446 496
696
721
307
290
430
416
391
394
17-0000-6552
R500 Right model, Glass
22-02-2023
n98,5
339**360
122*
n147
426
682
307
552
360
699**
151
427**
151
480
427**
389
n
160
446 496
696
721
307
290
430
416
391
394
17-0000-6552
R500 Right model, Glass
22-02-2023
n98,5
339**360
122*
n147
426
682
307
552
360
699**
151
427**
151
480
427**
389
n
160
446 496
696
721
307
290
430
416
391
394
17-0000-6552
R500 Right model, Glass
22-02-2023
n98,5
339**360
122*
n147
426
682
307
552
360
699**
151
427**
151
480
427**
389
n
160
446 496
696
721
307
290
430
416
391
394
17-0000-6552
R500 Right model, Glass
22-02-2023
n98,5
339**360
122*
n147
426
682
307
552
360
699**
151
427**
151
480
427**
389
n
160
446 496
696
721
307
290
430
416
391
394
17-0000-6552
R500 Right model, Glass
22-02-2023
n98,5
339**360
122*
n147
426
682
307
552
360
699**
151
427**
151
480
427**
389
n
160
446 496
696
721
307
290
430
416
391
394
17-0000-6552
R500 Right model, Glass
22-02-2023
n98,5
339**360
122*
n147
426
682
307
552
360
699**
151
427**
151
480
427**
389
n
160
446 496
696
721
307
290
430
416
391
394
GB
EN - 8
DIMENSIONAL SKETCHES
500-2 (right)
* AirSystem
** Interior dimensions
All dimensions are in mm.

17-0000-6554
R500 Left model, Glass
n
98,5
360
122*
n147
426
307
552
360
699**
151
427**
389
n160
446 496
696
721
339**
682
427**
480
151
391
416
430
307
290
394
17-0000-6554
R500 Left model, Glass
n
98,5
360
122*
n147
426
307
552
360
699**
151
427**
389
n160
446 496
696
721
339**
682
427**
480
151
391
416
430
307
290
394
17-0000-6554
R500 Left model, Glass
n
98,5
360
122*
n147
426
307
552
360
699**
151
427**
389
n160
446 496
696
721
339**
682
427**
480
151
391
416
430
307
290
394
17-0000-6554
R500 Left model, Glass
n
98,5
360
122*
n147
426
307
552
360
699**
151
427**
389
n160
446 496
696
721
339**
682
427**
480
151
391
416
430
307
290
394
17-0000-6554
R500 Left model, Glass
n
98,5
360
122*
n147
426
307
552
360
699**
151
427**
389
n160
446 496
696
721
339**
682
427**
480
151
391
416
430
307
290
394
17-0000-6554
R500 Left model, Glass
n
98,5
360
122*
n147
426
307
552
360
699**
151
427**
389
n160
446 496
696
721
339**
682
427**
480
151
391
416
430
307
290
394
17-0000-6554
R500 Left model, Glass
n
98,5
360
122*
n147
426
307
552
360
699**
151
427**
389
n
160
446 496
696
721
339**
682
427**
480
151
391
416
430
307
290
394
17-0000-6554
R500 Left model, Glass
n
98,5
360
122*
n147
426
307
552
360
699**
151
427**
389
n
160
446 496
696
721
339**
682
427**
480
151
391
416
430
307
290
394
GB
9 - EN
DIMENSIONAL SKETCHES
500-2 (left)
* AirSystem
** Interior dimensions
All dimensions are in mm.

A-A
A
A
17-0000-6556
R500 3G model, Glass
n
98,5
339**339**
122*
n147
426
682
307
552
339** 151
427**
151
430
389
446 496
684
n
160
479
416
391
307
290
678**
394
A-A
A
A
17-0000-6556
R500 3G model, Glass
n
98,5
339**339**
122*
n147
426
682
307
552
339** 151
427**
151
430
389
446 496
684
n
160
479
416
391
307
290
678**
394
A-A
A
A
17-0000-6556
R500 3G model, Glass
n
98,5
339**339**
122*
n147
426
682
307
552
339** 151
427**
151
430
389
446 496
684
n
160
479
416
391
307
290
678**
394
A-A
A
A
17-0000-6556
R500 3G model, Glass
n
98,5
339**339**
122*
n147
426
682
307
552
339** 151
427**
151
430
389
446
496
684
n
160
479
416
391
307
290
678**
394
A-A
A
A
17-0000-6556
R500 3G model, Glass
n
98,5
339**339**
122*
n147
426
682
307
552
339** 151
427**
151
430
389
446 496
684
n
160
479
416
391
307
290
678**
394
A-A
A
A
17-0000-6556
R500 3G model, Glass
n
98,5
339**339**
122*
n147
426
682
307
552
339** 151
427**
151
430
389
446 496
684
n
160
479
416
391
307
290
678**
394
A-A
A
A
17-0000-6556
R500 3G model, Glass
n
98,5
339**339**
122*
n147
426
682
307
552
339** 151
427**
151
430
389
446 496
684
n
160
479
416
391
307
290
678**
394
GB
EN - 10
DIMENSIONAL SKETCHES
500–3
* AirSystem
** Interior dimensions
All dimensions are in mm.

A
GB
11 - EN
PRODUCTION NUMBER
The production number is located in the bottom left corner of the fireplace insert (
see drawing).
It is also stated on the front of this installation manual.

GB
EN - 12
INFORMATION PLATE
All RAIS/ATTIKA fireplace inserts have an information plate specifying the fireplace in-
sert’s distance to flammable materials, efficiency etc. The information plate is laid loose
in the fireplace insert upon delivery.
See next page.
INFORMATION PLATE

Notified Body: 1235
21
Rais 500 Front model, Rais 500 Classic Front model
AFSTAND TIL BRÆNDBART, BAGVÆG
ABSTAND ZU BRENNBAREN BAUTEILEN, HINTEN
DISTANCE TO COMBUSTIBLE BACK WALL
DIST. ENTRE COMPOSANTS COMBUSTIBLES, ARRIÈRE
AFSTAND TIL BRÆNDBART, SIDEVÆG
ABSTAND ZU BRENNBAREN BAUTEILEN, SEITE
DISTANCE TO COMBUSTIBLE SIDE WALL
DISTANCE ENTRE COMPOSANTS COMBUSTIBLES, COTÉ
AFSTAND TIL BRÆNDBART, MØBLERING
ABSTAND VORNE ZU BRENNBAREN MÖBELN
DISTANCE TO FURNITURE AT THE FRONT
DISTANCE ENTRE COMPOSANTS COMBUSTIBLES, DEVANT
CO EMISSION (REL. 13% O2)
CO EMISSION IN DEN VERBRENNUNGSPRODUKTEN (BEI 13%O2)
EMISSION OF CO IN COMBUSTION PRODUCTS (AT 13%O2)
EMISSION CO DANS LES PRODUITS COMBUSTIBLES (À 13%O2)
STØV / STAUB / DUST / POUSSIÈRES:
RØGGASTEMPERATUR / ABGASTEMPERATUR /
FLUE GAS TEMPERATURE / TEMPÉRATURE DES GAZ DE FUMÉE:
NOMINEL EFFEKT / HEIZLEISTUNG /
THERMAL OUTPUT / PUISSANCE CALORIFIQUE:
VIRKNINGSGRAD / ENERGIEEFFIZIENZ /
ENERGY EFFIENCY /EFFICACITÉ ÉNERGÉTIQUE:
DK: Brug kun anbefalede brændsler. Følg instrukserne i bruger manualen.
Anordningen er egnet til røggassamleledning og intervalfyring.
DE: Lesen und befolgen Sie die Bedienungsanleitung.
Zeitbrandfeuerstätte. Nur empfohlene Brennstoffe einsetzen.
UK: Fuel types (only recommended). Follow the installation and
operating instruction manual. Intermittent operation.
F: Veuillez lire et observer les instructions du mode d’emploi.
Foyer à durèe de combustion limitèe, homologué pour
cheminée à connexions multiples. Utiliser seulement les
combustibles recommandés.
Not to be used in a shared ue
Produced for:
ATTIKA FEUER AG, Brunnmatt 16, CH-6330 Cham /
RAIS A/S, Industrivej 20, DK-9900 Frederikshavn
Produced at:
RAIS A/S, Industrivej 20, 9900 Frederikshavn, Danmark
EN 13229:2001+A1:2003+A2:2004,
EC.NO: 17
Raumheizer für feste Brennstoffe
Appliance fired by wood
Poêle pour combustibles solides
DK: mm SE BRUGERVEJLEDNING
DE: mm SIEHE BEDIENUNGSANLEITUNG
UK: mm SEE USER MANUAL
FR: mm CONSULTEZ LE GUIDE DE L’UTILISATEUR
DK: mm SE BRUGERVEJLEDNING
DE: mm SIEHE BEDIENUNGSANLEITUNG
UK: mm SEE USER MANUAL
FR: mm CONSULTEZ LE GUIDE DE L’UTILISATEUR
DK: 850mm SE BRUGERVEJLEDNING
DE: 850mm SIEHE BEDIENUNGSANLEITUNG
UK: 850mm SEE USER MANUAL
FR: 850mm CONSULTEZ LE GUIDE DE L’UTILISATEUR
0,09 % / 1125 mg/Nm³
10 mg/Nm3
289 °C
5,6 kW
76 %
DK: BRÆNDE
DE: HOLZ
UK: WOOD
FR: BOIS
Label for: RAIS 500 Front model
GB
13 - EN
Information plate 500-1
INFORMATION PLATE

Notified Body: 1235
21
Rais 500 Right model, Rais 500 Left model, Rais 500 3 Side model
Rais 500 Classic Right model, Rais 500 Classic Left model, Rais 500 Classic 3 Side model
AFSTAND TIL BRÆNDBART, BAGVÆG
ABSTAND ZU BRENNBAREN BAUTEILEN, HINTEN
DISTANCE TO COMBUSTIBLE BACK WALL
DIST. ENTRE COMPOSANTS COMBUSTIBLES, ARRIÈRE
AFSTAND TIL BRÆNDBART, SIDEVÆG
ABSTAND ZU BRENNBAREN BAUTEILEN, SEITE
DISTANCE TO COMBUSTIBLE SIDE WALL
DISTANCE ENTRE COMPOSANTS COMBUSTIBLES, COTÉ
AFSTAND TIL BRÆNDBART, MØBLERING
ABSTAND VORNE ZU BRENNBAREN MÖBELN
DISTANCE TO FURNITURE AT THE FRONT
DISTANCE ENTRE COMPOSANTS COMBUSTIBLES, DEVANT
CO EMISSION (REL. 13% O2)
CO EMISSION IN DEN VERBRENNUNGSPRODUKTEN (BEI 13%O2)
EMISSION OF CO IN COMBUSTION PRODUCTS (AT 13%O2)
EMISSION CO DANS LES PRODUITS COMBUSTIBLES (À 13%O2)
STØV / STAUB / DUST / POUSSIÈRES:
RØGGASTEMPERATUR / ABGASTEMPERATUR /
FLUE GAS TEMPERATURE / TEMPÉRATURE DES GAZ DE FUMÉE:
NOMINEL EFFEKT / HEIZLEISTUNG /
THERMAL OUTPUT / PUISSANCE CALORIFIQUE:
VIRKNINGSGRAD / ENERGIEEFFIZIENZ /
ENERGY EFFIENCY /EFFICACITÉ ÉNERGÉTIQUE:
DK: Brug kun anbefalede brændsler. Følg instrukserne i bruger manualen.
Anordningen er egnet til røggassamleledning og intervalfyring.
DE: Lesen und befolgen Sie die Bedienungsanleitung.
Zeitbrandfeuerstätte. Nur empfohlene Brennstoffe einsetzen.
UK: Fuel types (only recommended). Follow the installation and
operating instruction manual. Intermittent operation.
F: Veuillez lire et observer les instructions du mode d’emploi.
Foyer à durèe de combustion limitèe, homologué pour
cheminée à connexions multiples. Utiliser seulement les
combustibles recommandés.
Not to be used in a shared ue
Produced for:
ATTIKA FEUER AG, Brunnmatt 16, CH-6330 Cham /
RAIS A/S, Industrivej 20, DK-9900 Frederikshavn
Produced at:
RAIS A/S, Industrivej 20, 9900 Frederikshavn, Danmark
EN 13229:2001+A1:2003+A2:2004
EC.NO: 17
Raumheizer für feste Brennstoffe
Appliance fired by wood
Poêle pour combustibles solides
DK: mm SE BRUGERVEJLEDNING
DE: mm SIEHE BEDIENUNGSANLEITUNG
UK: mm SEE USER MANUAL
FR: mm CONSULTEZ LE GUIDE DE L’UTILISATEUR
DK: mm SE BRUGERVEJLEDNING
DE: mm SIEHE BEDIENUNGSANLEITUNG
UK: mm SEE USER MANUAL
FR: mm CONSULTEZ LE GUIDE DE L’UTILISATEUR
DK: 850mm SE BRUGERVEJLEDNING
DE: 850mm SIEHE BEDIENUNGSANLEITUNG
UK: 850mm SEE USER MANUAL
FR: 850mm CONSULTEZ LE GUIDE DE L’UTILISATEUR
0,09 % / 1125 mg/Nm³
10 mg/Nm3
289 °C
5,6 kW
76 %
DK: BRÆNDE
DE: HOLZ
UK: WOOD
FR: BOIS
Label for: RAIS 500 2G og 3G manuelt spjæld
GB
EN - 14
Information plate 500-2 and 500-3
INFORMATION PLATE

A ( 0,5 )
A
A ( 0,5 )
A
GB
15 - EN
INSTALLATION
INSTALLATION
The following section explains how to install the fireplace insert and includes informa-
tion about the packaging, installation distances, etc.
DELIVERY PACKAGING
The fireplace insert is supplied secured to a transport pallet using four transport safe-
ty fittings. The safety fittings are secured with screws, which must be unscrewed. The
safety fitting can then be removed.
There is a polystyrene block in the top of the
fireplace insert which secures the baffle during
transport. The polystyrene block must be re-
moved before starting a fire in the stove.
DISPOSAL
RECYCLING OF PACKAGING
The fireplace insert is delivered in recyclable
packaging.
This packaging must be disposed of in accord-
ance with national regulations relating to the
disposal of waste.
NOTICE: DISPOSAL OF THE FIREPLACE IN-
SERT AT THE END OF ITS LIFETIME
The glass is not recyclable.
The glass must be disposed of along with any
residual ceramic or porcelain waste. Heat-re-
sistant glass has a higher melting point, which
is why it is not recyclable.
By ensuring heat-resistant glass does not end
up alongside recyclable products you are mak-
ing an important contribution to the environ-
ment.

GB
EN - 16
INSTALLATION
CHOICE OF MATERIAL FOR INSTALLATION
The material can be panels/brick with an insulation value greater than 0.03 m² x K/W.
The insulation is defined as wall thickness (in metres) divided by the wall’s Lambda val-
ue.
Contact your installation technician/chimney inspector.
During testing, the fireplace insert is installed in a cabinet made from non-flammable
50 mm calcium silicate panels (Skamotec 225).
The fireplace insert must be installed in heat-resistant material.
See the following pages for the installation dimensions and the installation distances.

17-0000-6541
Rais 500 Indbygningsmål 1G Skamotec
820
720
50
50
473
17-0000-6541
Rais 500 Indbygningsmål 1G Skamotec
820
720
50
50
473
17-0000-6541
Rais 500 Indbygningsmål 1G Skamotec
820
720
50
50
473
GB
17 - EN
INSTALLATION DIMENSIONS
INSTALLATION DIMENSIONS: 500–1
Applies to installations made from non-flammable panels.
Cavity dimensions (height x width) min. 484 x 730 mm
A fireplace insert must never be installed in a cavity that is tight, since steel expands
when heated.
The minimum area for convection air
above and below the fireplace insert
can be distributed for several cavities.
500 cm²
250 cm²
Minimum
Minimum

A-A
B-B
A
A
B
B
17-0000-6541
Rais 500 Indbygningsmål 1G Skamotec
250
1100
350
300
850
A-A
B-B
A
A
B B
17-0000-6541
Rais 500 Indbygningsmål 1G Skamotec
250
1100
350
300
850
A-A
B-B
A
A
B B
17-0000-6541
Rais 500 Indbygningsmål 1G Skamotec
250
1100
350
300
850
A-A
B-B
A
A
B B
17-0000-6541
Rais 500 Indbygningsmål 1G Skamotec
250
1100
350
300
850
A
A
GB
EN - 18
INSTALLATION DISTANCE
A non-flammable panel must be fitted directly above the convection grate so that
“standing” hot air does not develop above the convection opening. This is done to pro-
tect the ceiling and to transport the heat out of the fireplace insert.
The insulated part of the chimney must
extend all the way down to the flue spigot.
Also applies if a bended pipe is used into
an existing chimney (see drawing)
INSTALLATION DISTANCE: 500–1
Minimum distance Units of meas-
urement: mm
Distance to furniture from door 850
Distance to cabinet interior 50
Distance from doorto flammable ceiling 1100
Distance from convection grate to flam-
mable ceiling
250
Distance from door to flammable floor 350
Distance to flammable at side of door 300
Flammable wall
Non-flammable plate

17-0000-6543
Rais 500 Indbygningsmål 2G Skamotec
21-02-2023
423
50
50
699
17-0000-6543
Rais 500 Indbygningsmål 2G Skamotec
21-02-2023
423
50
50
699
17-0000-6543
Rais 500 Indbygningsmål 2G Skamotec
21-02-2023
423
50
50
699
GB
19 - EN
INSTALLATION DIMENSIONS
The minimum area for convection air
above and below the fireplace insert can
be distributed for several cavities.
500 cm²
250 cm²
INSTALLATION DIMENSIONS: 500–2
Applies to installations made from non-flammable panels.
Cavity dimensions (height x width) min. 484 x 654 x 350 mm
A fireplace insert must never be installed in a cavity that is tight, since steel expands
when heated.
Minimum
Minimum

B-B
C-C
B
B
C C
17-0000-6544
Rais 500 Indbygningsmål 2G Skamotec
850
350 300
131
350 250
1100
B-B
C-C
B
B
C C
17-0000-6544
Rais 500 Indbygningsmål 2G Skamotec
850
350 300
131 350 250
1100
B-B
C-C
B
B
C C
17-0000-6544
Rais 500 Indbygningsmål 2G Skamotec
850
350 300
131
350 250
1100
B-B
C-C
B
B
C C
17-0000-6544
Rais 500 Indbygningsmål 2G Skamotec
850
350 300
131 350 250
1100
A
A
GB
EN - 20
INSTALLATION DISTANCE
INSTALLATION DISTANCE: 500–2
A non-flammable panel must be fitted directly above the convection opening so that
“standing” hot air does not develop above the convection opening. This is done to pro-
tect the ceiling and to transport the heat out of the fireplace insert.
Minimum distance Units of
meas-
urement:
mm
Distance to furniture from door 850
Furniture distance from side glass 350
Distance to cabinet interior 50
Distance from door to flammable ceiling 1100
Distance from convection grate to flam-
mable ceiling
250
Distance from door to flammable floor 350
Distance to flammable at side of door 300
Flammable wall
Non-flammable plate
The insulated part of the chimney must extend
all the way down to the flue spigot. Also applies
if a bended pipe is used into an existing chim-
ney (see drawing)

A-A
B-B
AA
B
B
300
1100
250
578
678
50
A-A
B-B
AA
B
B
300
1100
250
578
678
50
17-0000-6545
Rais 500 Indbygningsmål 3G Skamotec
GB
21 - EN
INSTALLATION DIMENSIONS
INSTALLATION DIMENSIONS: 500–3
Applies to installations made from non-flammable panels.
Cavity dimensions (height x width) min. 484 x 578 x 350 mm.
A fireplace insert must never be installed in a cavity that is tight, since steel expands
when heated.
The minimum area for convection air
above and below the fireplace insert
can be distributed for several cavities.
500 cm²
250 cm²
Minimum
Minimum