AU Optronics G229HAF02.0 User manual

LCD Display
LCD Display LCD Display
LCD Display
USER MANUAL
USER MANUALUSER MANUAL
USER MANUAL
G229HAF0
G229HAF0G229HAF0
G229HAF02
22
2.0
.0.0
.0
V1.0
V1.0V1.0
V1.0

2
22
2 | « Table f Contents »
Table f Contents
Table f ContentsTable f Contents
Table f Contents
SAFETY INSTRUCTI NS
SAFETY INSTRUCTI NSSAFETY INSTRUCTI NS
SAFETY INSTRUCTI NS ................................
................................................................
......................................................
............................................
...................... 3
33
3
Declarations and Statements .......................................................... 4
WHAT’S IN THE B X
WHAT’S IN THE B XWHAT’S IN THE B X
WHAT’S IN THE B X ................................
................................................................
............................................................
........................................................
............................ 6
66
6
Package Contents .............................................................................. 6
M VING THE DISPLAY
M VING THE DISPLAYM VING THE DISPLAY
M VING THE DISPLAY ................................
................................................................
.........................................................
..................................................
......................... 7
77
7
Unpacking the Display ...................................................................... 7
Carrying the Display ......................................................................... 9
Placing the Display ............................................................................ 9
Setting Down the Display ................................................................ 9
M UNTING THE DISPLAY
M UNTING THE DISPLAYM UNTING THE DISPLAY
M UNTING THE DISPLAY ................................
................................................................
.................................................
..................................
................. 10
1010
10
rienting the Display ..................................................................... 10
Wireless Antenna ............................................................................ 11
Wall Mount Specifications ............................................................. 11
SETTING UP THE DISPLAY
SETTING UP THE DISPLAYSETTING UP THE DISPLAY
SETTING UP THE DISPLAY ................................
................................................................
.................................................
..................................
................. 12
1212
12
Main Components ........................................................................... 12
Connecting the Power Cable ....................................................... 13
C NNECTING THE DISPLAY
C NNECTING THE DISPLAYC NNECTING THE DISPLAY
C NNECTING THE DISPLAY ................................
................................................................
...........................................
......................
........... 14
1414
14
Using the Micro-USB Port ............................................................ 14
Connecting a Second Display ....................................................... 15
Connecting to Wireless Internet ................................................. 16
Connecting to the Internet via a Wired Connection ............. 17
H ME SCREEN
H ME SCREENH ME SCREEN
H ME SCREEN ................................
................................................................
................................................................
................................................................
.....................................
..........
..... 18
1818
18
SETTINGS
SETTINGSSETTINGS
SETTINGS ................................
................................................................
................................................................
................................................................
...............................................
..............................
............... 19
1919
19
Adjusting the brightness ................................................................ 20
Changing the Display’s Language ................................................. 21
Changing the Date and Time ........................................................ 22
INSTALLING APPS
INSTALLING APPSINSTALLING APPS
INSTALLING APPS ................................
................................................................
................................................................
................................................................
.................................
..
. 2
22
23
33
3
PR DUCT SPECIFICATI NS
PR DUCT SPECIFICATI NSPR DUCT SPECIFICATI NS
PR DUCT SPECIFICATI NS ................................
................................................................
............................................
........................
............ 24
2424
24

« SAFETY INSTRUCTI NS » | 3
33
3
SAFETY INSTRUCTI NS
SAFETY INSTRUCTI NSSAFETY INSTRUCTI NS
SAFETY INSTRUCTI NS
Please carefully read through and keep the following instructions for future reference before using
the display.
•
Before using the LCD display, please read this manual completely and follow the guidelines to
protect your own and other people’s property and avoid causing serious injury.
•
D N T use this apparatus near water or install in a high-humidity environment.
•
D N T place this apparatus in direct sunlight or install near any heat sources (such as
radiators, heat registers, or stoves).
•
D N T block any ventilation openings. Always leave a space of at least 10cm around this
apparatus. The slots and openings are provided to protect the display from overheating and to
help maintain reliable operation of the display.
•
NEVER place this apparatus on an unstable cart, stand, bracket, or table. It may cause serious
personal injury, death, or serious damage to the display.
•
When positioning the display, make sure the power plug and outlet are easily accessible and
protect the power cord from being walked on or pinched.
•
D N T overload the wall outlets and connect too many appliances to the same AC power
outlet.
•
D N T use any unapproved items or cables to connect to this apparatus.
•
D N T defeat the safety purpose of the polarized or grounding type plug.
•
NLY USE accessories specified by the manufacturer.
•
Clean only with a dry cloth and turn the power off before cleaning.
•
Keep this apparatus and all package contents (including the EPE foam packaging cushion and
protective board) out of the reach of children at all times.
•
Never attempt to repair or open the display by yourself. pening and removing the covers
may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may
result in death or serious injury. Please contact your dealer or a service technician for
assistance.
•
To much screen time may hurt your eyesight. Rest your eyes for 10 minutes after 30 minutes
screen time.
•
Kids under 2 years old should not watch the screen, and kids over 2 years old should not
watch the screen for more than 1 hour per day.
WARNING
WARNINGWARNING
WARNING
:
::
:
If using a Class 1 adapter, connect only to a grounded electrical outlet.
Consult an authorized service technician if the display does not operate normally when you have
followed the instructions in this manual.

4
44
4 | « SAFETY INSTRUCTI NS »
Declarations and Statements
Declarations and StatementsDeclarations and Statements
Declarations and Statements
CE statement:
CE statement:CE statement:
CE statement:
EU Declaration of Conformity
EU Declaration of ConformityEU Declaration of Conformity
EU Declaration of Conformity
We, AU ptronics Corporation, declare that this product complies with the following Directives:
2014/35/EU
2014/53/EU
And the following standards have been applied:
EN 60950-1:2006+A1:2010+A11:2009+A12:2011+A2:2013
EN 62311:2008
EN 300 328 V2.1.1
EN 301 489-1 V2.1.1
EN 301 489-17 V3.1.1
Important:
Important:Important:
Important:
- This product must not be used in residential areas.
- This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures
to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
The frequency and maximum transmitted power in EU are listed as below:
2412 – 2472 MHz: 17.98 dBm
MSIT (Ministry of Science and ICT) Statement
MSIT (Ministry of Science and ICT) StatementMSIT (Ministry of Science and ICT) Statement
MSIT (Ministry of Science and ICT) Statement
Name of the company: AU ptronics Corporation
Name of equipment (model name): LCD monitor (G229HAF02.0)
Date of manufacture: 2019.07
Manufacturer/Country of origin: AU / made in China
Services related to personal safety may not apply since radio interference may be caused by the wireless equipment.
This device has been evaluated for business use. If this device is used in home environments, radio interference may occur.
FCC (
FCC (FCC (
FCC (Fe
FeFe
Federal Communications Commission
deral Communications Commissionderal Communications Commission
deral Communications Commission)
))
) Statement
StatementStatement
Statement
This device complies with Part 15 of the FCC Rules. peration is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
15.21
15.21 15.21
15.21
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
15.105
15.105 15.105
15.105
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions manual, may cause harmful interference to radio communications. peration of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Radiation Exposure
Radiation Exposure Radiation Exposure
Radiation Exposure Statement
StatementStatement
Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

« SAFETY INSTRUCTI NS » | 5
55
5
Declaration of the Presence Condition of the Restricted Substances Marking
Declaration of the Presence Condition of the Restricted Substances MarkingDeclaration of the Presence Condition of the Restricted Substances Marking
Declaration of the Presence Condition of the Restricted Substances Marking
Equipment Name: LCD Display Type Designation (Type): G229HAF02.0
Unit
Restricted substances and its chemical symbols
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr
+6
)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Printed circuit
board
－
○ ○ ○ ○ ○
Cover
○ ○ ○ ○ ○ ○
LCD Panel
○ ○ ○ ○ ○ ○
Power cable
－
○ ○ ○ ○ ○
Note 1
:
“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the
percentage content of the restricted substance
exceeds the reference percentage value of presence condition.
Note 2:
○
“ ” indicates that the percentage content of the restricted substance does not exceed the percentage of reference
value of presence.
Note 3:
−
The “ ” indicates that the restricted substance corresponds to the exemption.
AU ptronics Corporation (AU )
Address: No. 1, Li-Hsin Rd. 2, Hsinchu Science Park, Hsinchu 30078, Taiwan, R. .C.

6
66
6 | « WHAT’S IN THE B X »
WHAT’S IN THE B X
WHAT’S IN THE B XWHAT’S IN THE B X
WHAT’S IN THE B X
Package Contents
Package ContentsPackage Contents
Package Contents
Check your product box for the following items. If there are any missing accessories, contact the
local dealer where you purchased your display. The illustrations in this manual may differ from the
actual product and items.
Display x 6
Adapter x 6 Power Cord x 6
Micro-HDMI Cable x 6 Type-C USB Cable x 6

« M VING THE DISPLAY » | 7
77
7
M VING THE DISPLAY
M VING THE DISPLAYM VING THE DISPLAY
M VING THE DISPLAY
Unpacking the Display
Unpacking the DisplayUnpacking the Display
Unpacking the Display
Before unpacking the display, prepare a flat and stable surface near a wall outlet. Set the product
box in an upright position according to the arrow markings on the outside of the product box.
1.
1.1.
1. pen the product box from the top side.
2.
2.2.
2. Remove the top EPE cushion.
3.
3.3.
3. Remove two sets of accessories from the side compartments in the top layer.

8
88
8 | « M VING THE DISPLAY »
4.
4.4.
4. Remove two displays, one by one, from the center compartment of the top layer.
5.
5.5.
5. Remove the cardboard and EPE foam base of the top layer.
6.
6.6.
6. Repeat steps 3 to 5 for the second layer.
7.
7.7.
7. Repeat steps 3 to 4 for the third layer.
8.
8.8.
8. Remove the electrostatic bags covering each display.

« M VING THE DISPLAY » | 9
99
9
Carrying the Display
Carrying the DisplayCarrying the Display
Carrying the Display
When carrying the display, always
hold
the display securely using
both hands. When gripping the display do not put force to the
screen.
CAUTI N:
CAUTI N:CAUTI N:
CAUTI N:
Avoid applying force or using sharp objects on the
screen
at all times.
Placing the Display
Placing the DisplayPlacing the Display
Placing the Display
When placing the display, always put the screen face down as
illustrated in the Setting Down the Display section. Never stand the
display upright. Never tilt the display towards the left, right or
balanced on a single corner of the frame.
Setting Down the Display
Setting Down the DisplaySetting Down the Display
Setting Down the Display
When setting the display down, place the screen face down on a flat and stable surface covered by a
protective sheet and a table cushion as shown in the illustration provided.
CAUTI N:
CAUTI N:CAUTI N:
CAUTI N:
Never press or place anything on the back cover. This may damage the
internal parts of the display.

1
11
10
00
0 | « M UNTING THE DISPLAY »
M UNTING THE DISPLAY
M UNTING THE DISPLAYM UNTING THE DISPLAY
M UNTING THE DISPLAY
rienting the Display
rienting the Displayrienting the Display
rienting the Display
To avoid injuries, follow the installation instructions to safely install the display onto a wall.
It is recommended to allow a certified installation company conduct the wall mounting operation.
CAUTI N:
CAUTI N:CAUTI N:
CAUTI N:
Dropping the display may cause injuries to peop
le around it.
N TE:
N TE: N TE:
N TE: A wall mount may be purchased separately for easier installation.
If you want to use the display vertically or horizontally, adjust the display such that the output ports
on the back of the display are pointing downward and the input ports are pointing upward (as
illustrated below). If the display is not mounted in such a way the display may not function properly.
N TE:
N TE: N TE:
N TE: Before mounting, make sure there is space to connect your devices.
See “C NNECTING THE DISPLAY” on page 14.
90°

« M UNTING THE DISPLAY » | 1
11
11
11
1
Wireless Antenna
Wireless AntennaWireless Antenna
Wireless Antenna
The display features an antenna on its top side used for Wi-Fi connections. When installing the
display, please ensure that no objects are placed on the wireless antenna and that the area around
the antenna is kept clear of any metal objects, devices, or equipment. Failure to do so will result in
weak or possibly no wireless signal.
Wall Mount Specifications
Wall Mount SpecificationsWall Mount Specifications
Wall Mount Specifications
The back of the display is equipped with two screw-holes with a width of 190.00mm that allow for
mounting. Firmly secure a mount onto the display using two M3x4mm length screws (maximum
torque: 8 kgf-cm).
190.00mm

1
11
12
22
2 | « SETTING UP THE DISPLAY »
SETTING UP THE DISPLAY
SETTING UP THE DISPLAYSETTING UP THE DISPLAY
SETTING UP THE DISPLAY
Main Components
Main ComponentsMain Components
Main Components
The following image and table show the location of the connectors and other components.
Item
ItemItem
Item
Description
DescriptionDescription
Description
1
11
1
RESET button
Press with a sharp
-
tipped instrument to restart the display.
2
22
2
TYPE
-
C PWR IN
(Power Input) Connects with the supplied adapter and power cord.
3
33
3
M
-
USB
(Micro-USB Input)
Connects with storage devices containing video and image files
, a
mouse, or a keyboard.
4
44
4
Wi
-
Fi Antenna
Receives wireless internet signal.
5
55
5
TYPE
-
C PWR UT
(Power utput)
Connects with the Type
-
C power input port of a second bar
-
type
display to provide power to the second display.
6
66
6
M
-
HDMI UT
(Micro-HDMI
utput)
Connects with the Micro-HDMI input port of a second bar-type
display to duplicate the video shown on this display.
2
22
2
3
33
3
5
55
5
1
11
1
6
66
6
4
44
4

« SETTING UP THE DISPLAY » | 1
11
13
33
3
Connecting the Power Cable
Connecting the Power CableConnecting the Power Cable
Connecting the Power Cable
1.
1.1.
1. Connect the adapter to the display.
2.
2.2.
2. Connect the power cord to the adapter.
3.
3.3.
3. Fully insert the plug the power cord into the power outlet socket.
nce the power connection is connection is made, the display will automatically power on.
CAUTI N:
CAUTI N:CAUTI N:
CAUTI N:
Loose connections may cause noise. Do not plug and unplug the power cord
repeatedly in a short period of time.
N TE:
N TE: N TE:
N TE:
•
The supplied power cord varies depending on the country where you purchased this
apparatus. For all cases, use a power cord that matches the AC voltage of the power
outlet and has been approved by and complies with the safety standard of your
country.
•Be sure use applicable AC/DC adapter:
Manufacture WEIHAI Power Electronics Co., Ltd. Model: AMB-036-12
CAUTI N:
CAUTI N:CAUTI N:
CAUTI N:
When disconnecting the AC power cord, be sure to first disconnect the plug
from the outlet socket.

1
11
14
44
4 | « C NNECTING THE DISPLAY »
C NNECTING THE DISPLAY
C NNECTING THE DISPLAYC NNECTING THE DISPLAY
C NNECTING THE DISPLAY
N TE:
N TE:N TE:
N TE: Before making connections, make sure that the power for all the connected
equipment is off and then powering on each device including the display after the
connections are made.
Using the
Using the Using the
Using the Micro
MicroMicro
Micro-
--
-USB Port
USB PortUSB Port
USB Port
1.
1.1.
1. Connect a USB-to-Micro-USB adapter or hub to the M-USB input port on display:
2.
2.2.
2. Connect any of the following items to the USB-to-Micro-USB adapter or hub:
•USB flash drive, keyboard, or mouse.
N TE:
N TE:N TE:
N TE: A customized media player must be installed on the display for the
video/image file to display automatically.
•Ethernet hub via an RJ45 cable and an RJ45-to-USB adapter.
N TE:
N TE:N TE:
N TE: The display only supports the following video/image file formats
(with their listed
resolution) via the Micro-USB port:
•MP4 (H.264/AVC) - 1920x165
•JPG - 1920x165
•BMP - 1920x165

« C NNECTING THE DISPLAY » | 1
11
15
55
5
Connecting a Second Display
Connecting a Second DisplayConnecting a Second Display
Connecting a Second Display
1.
1.1.
1. Connect the supplied Type-C USB cable to the Type-C power output port on the display.
2.
2.2.
2. Connect the supplied Micro-HDMI cable to the Micro-HDMI output port on the display.
3.
3.3.
3. Connect the Type-C USB cable to the Type-C power input port on the second display.
4.
4.4.
4. Connect the Micro-HDMI cable to the Micro-HDMI input port on the second display. The
second display will begin duplicating the video shown on the primary display.
5.
5.5.
5. Connect a mouse to the display. For connection details, see “Using the Micro-USB Port” on
page 14.
By default your display will automatically output its video to the second display, but in instances
where the display’s settings have been changed, video output may be disabled. To re-enable video
output to a second display follow the instructions below:
1.
1.1.
1. Power on primary display, see “Connecting the Power Cable” on page 13.
2.
2.2.
2. Click the All Apps button (arrow icon) at the bottom corner of the home screen to enter the
All Apps menu.
3.
3.3.
3. Select Settings
Settings Settings
Settings in the All Apps screen.
4.
4.4.
4. Select Display
DisplayDisplay
Display in the Settings
SettingsSettings
Settings menu.
5.
5.5.
5. Select Advanced
AdvancedAdvanced
Advanced in the Display
DisplayDisplay
Display menu.
6.
6.6.
6. Select HDMI settings
HDMI settingsHDMI settings
HDMI settings in the Display
DisplayDisplay
Display menu.
7.
7.7.
7. Enable HDMI
HDMIHDMI
HDMI in the Advanced
AdvancedAdvanced
Advanced menu.
G229HAF02.0
G229HAF02.0G229HAF02.0
G229HAF02.0
G229HAF01.0
G229HAF01.0G229HAF01.0
G229HAF01.0

1
11
16
66
6 | « C NNECTING THE DISPLAY »
Connecting to Wireless Internet
Connecting to Wireless InternetConnecting to Wireless Internet
Connecting to Wireless Internet
After powering on the display you must follow the steps below to connect the display to a wireless
router:
1.
1.1.
1. Connect a mouse to the display. For connection details, see “Using the Micro-USB Port” on
page 14.
2.
2.2.
2. Click the All Apps button (arrow icon) at the bottom corner of the home screen to enter the
All Apps menu.
3.
3.3.
3. Select Settings
Settings Settings
Settings in the All Apps screen.
4.
4.4.
4. Select Network & Internet
Network & InternetNetwork & Internet
Network & Internet in the Settings
SettingsSettings
Settings menu.
5.
5.5.
5. Select Wi
WiWi
Wi-
--
-Fi
FiFi
Fi in the Network & Internet
Network & InternetNetwork & Internet
Network & Internet menu.
6.
6.6.
6. Ensure that the Wi
WiWi
Wi-
--
-Fi
FiFi
Fi switch is enabled.
7.
7.7.
7. Select the SSID of the router you want to connect to. Enter the router’s password if necessary.
8.
8.8.
8. Return to the All Apps menu.
9.
9.9.
9. Select the Browser
BrowserBrowser
Browser app in the All Apps menu and open a webpage to ensure that you have
properly connected to wireless Internet.

« C NNECTING THE DISPLAY » | 1
11
17
77
7
Connecting to
Connecting toConnecting to
Connecting to the
thethe
the Internet
InternetInternet
Internet via a Wired
via a Wired via a Wired
via a Wired
Connection
ConnectionConnection
Connection
The display features a built-in wireless antenna which allows it to wirelessly connect to the Internet.
If you need to connect the display to a wired Internet connection you must follow the steps below
after powering on the display to connect the display to a router:
N TE:
N TE:N TE:
N TE: It is not recommended to simultaneously connect the display to the Internet via
both a wireless and a wired connection. You should disconnect your display from any
wireless Internet connections first if you choose to connect the display to a wired
Internet connection.
1.
1.1.
1. Connect a mouse to the display. For connection details, see “Using the Micro-USB Port” on
page 14.
2.
2.2.
2. Connect a router to the display. For connection details, see “Using the Micro-USB Port” on
page 14.
3.
3.3.
3. Click the All Apps button (arrow icon) at the bottom corner of the home screen to enter the
All Apps menu.
4.
4.4.
4. Select Settings
Settings Settings
Settings in the All Apps screen.
5.
5.5.
5. Select Network & Internet
Network & InternetNetwork & Internet
Network & Internet in the Settings
SettingsSettings
Settings menu.
6.
6.6.
6. Select Ethernet
EthernetEthernet
Ethernet in the Network & Internet
Network & InternetNetwork & Internet
Network & Internet menu.
7.
7.7.
7. Ensure that the switch in the Ethernet
EthernetEthernet
Ethernet menu is n
nn
n.
8.
8.8.
8. Return to the All Apps menu.
9.
9.9.
9. Select the Browser
BrowserBrowser
Browser app in the All Apps menu and open a webpage to ensure that you have
properly connected to wireless Internet.

1
11
18
88
8 | « H ME SCREEN »
H ME SCREEN
H ME SCREENH ME SCREEN
H ME SCREEN
The home screen for the display features multiple buttons that allow you to navigate to apps and
settings menus.

« SETTINGS » | 1
11
19
99
9
SETTINGS
SETTINGSSETTINGS
SETTINGS
You can adjust a number of the display’s settings by using the settings menu for the display. To
access the settings menu:
1.
1.1.
1. Connect a mouse and keyboard to the display. For connection details, see “Using the
Micro-USB Port” on page 14.
2.
2.2.
2. Click the All Apps button (arrow icon) at the bottom corner of the home screen to enter the
All Apps menu.
3.
3.3.
3. Select Settings
Settings Settings
Settings in the All Apps screen.
From the settings you can:
•
Adjust the brightness of the display
•
Change the display’s language
•
Change the date and time for the display

2
22
20
00
0 | « SETTINGS »
Adjusting the brightness
Adjusting the brightnessAdjusting the brightness
Adjusting the brightness
To adjust the brightness of the display from the settings menu:
1.
1.1.
1. Select Display
DisplayDisplay
Display in the Settings
SettingsSettings
Settings menu.
2.
2.2.
2. Select Brightness level
Brightness levelBrightness level
Brightness level in the Display
DisplayDisplay
Display menu.
3.
3.3.
3. Toggle the bar to adjust the brightness to the level you want.
Adjusting the Brightness on a Second Display
Adjusting the Brightness on a Second DisplayAdjusting the Brightness on a Second Display
Adjusting the Brightness on a Second Display
If you have connected a second display (as described in the “Connecting a Second Display” section
on page 15) you can adjust the brightness on the second display by following the steps below:
1.
1.1.
1. Return to the All Apps menu.
2.
2.2.
2. Select 2nd Display Configuration
2nd Display Configuration2nd Display Configuration
2nd Display Configuration in the All Apps menu.
3.
3.3.
3. Toggle the bar at the top of the 2nd Display Configuration
2nd Display Configuration2nd Display Configuration
2nd Display Configuration menu to adjust the brightness to the
level you want.