Farenheit NE-S150N User manual

NE-S150N
OPERATION MANUAL
15 Inch Headrest TFT-LCD Monitor

DC 12~14.4V
6W
15 TFT LCD
16:9
2400*600
Video Input 2EA
(L)15.6 (W)10.5 (H)1.8inch
NTSC/PAL Auto Select
Power Requirements
Power Consumption
Screen Size
Screen Format
Resolution Pixel
A/V Inputs
Dimensions
Compatible video standard
*Although the effective pixels for the liquid crystal panel is given as
99.98% or more, 0.02% of pixels may not light or may light incorrectly.
10
Specifications

Caution 3
Installatlon 4
Operation Function 5
Remote
Picture Control 7
Connections 8
Troubleshooting check list 9
Specifications 10
Function 6
Thank you for your purchase.
Please read this user,s Manual in detail and use the set properly.
Contents
2
9
Troubleshooting check list
*Please make these simple checks before calling for assistance.
*If the TV is to be used in conjunction with any other equipment,
read the other product,s instruction manual.
*If you choose not follow the below checklist or any problems
you are experiencing with this product are not solved, never
attempt to repair a defective monitor yourself. Check with your
dealer .
*Power cord inserted into power source incorrectly.
*Another product,s cord inserted into TV incorrectly.
*Check the signal in AV mode.
*Check the signal in AV mode.
*Adjust the contrast and brightness settings.
*Check whether the batteries have sufficient power. Replace if
necessary.
*Check whether the batteries are correctly installed in the remote
control.
*Check the remote control sensor lens on the monitor and the distance
and angle on the remote control(2m,30 ).
No picture & no sound
No picture
Monitor not responding to remote control

3
The driver should never operate the monitor while driving.
This can cause an accident.
Do not disassemble the device.
Use proper volume while driving.
Get advice from a qualified engineer to set up the monitor.
Do not watch monitor for long periods of time while the
stopped engine.
Protect the LCD Panel from falling or being impacted.
Do not recharge, disassemble and protect from the heat
the remote control battery.
Keep remote control battery away from children.
Use only soft cloth with non-ammonia glass cleaner to clean
the panel.
1 The range of preservation temperature for the device is from -20 to 70
Be cautious aware that the inside temperature of car may arise up to 100 in summer time.
2 The monitor picture may not be displayed normally when it is higher or lower than
recommended temperature.
In this case, the screen will be back normal condition after few minutes.
The range of recommended temperature for the device is from 0 to 40 .
3 You can have the best picture when you are in front of the monitor.
(Visual Angle)
20
40
45 45
Check Point
Read this page in detail in order to protect your safety
as well as others.
Connections
8
Caution
VIDEO 1
EXTERNAL DEVICE
VIDEO 2
RED BLACK
FUSE
to +12 VDC Battery to Chassis Ground R
MENU
VIDEO

7
REMOTE CONTROL SENSOR
POWER ON/ OFF
Installation
4
Picture Control
Please mount the monitor where it make you have the best picture.
To adjust CONTRAST, BRIGHTNESS, COLOR press the MENU button until you
arrive at the screen for that item. Use the and buttons to adjust the value.
Press the buttons to make another adjustment. P leave
the MENU system.
and ress the MENU to
Contrast/Brightness/Color
CONTRAST
BRIGHTNESS
COLOR
50
50
50
1. Bring up the on-screen function menu by pressing the MENU button on the
remote control.
2. Press the and buttons on the remote control of monitor until you see the
item you wish to adjust.
3. Use the and buttons to adjust the value.
4. Press the MENU button to leave the MENU system.

POWER
AV1/AV2
MENU
LCD MONITOR
REMOTE CONTROL UNIT
6
5
Power: Power ON/OFF.
AV: AV1/AV2 Signal Select.
Menu: Press this button for OSD menu.
: Use the and buttons to increase current
option value or decrease current option value.
: Use the and buttons to select menu option.
Remote Function
Operation Function
2 1
3
4
5
1
2
3
4
5
REMOTE CONTROL SENSOR
POWER ON/ OFF