
P.1
FEATURES
●Total 5 microphone inputs (Input 1 & 2 can be change to Line IN by
Switch)
●MIC 1 has priority function ( Stopped the function by switch at the rear
panel)
●Two Line outputs available (RCA 0db 0.755V)
●Isolated transformer for PC input in the front panel rejected the HUM
noise
●Available 4Ω/70/100V Speaker Output
●Six Zones individual output with 6 steps level control (60W/CH)
●Individual ON/OFF switch for each zone output with LED indicator
●Remote ON/OFF for main power
●7 bands graphic EQ
PRECAUTIONS
●If something wrong, such as intermittent sound, happens during
operation, turn off the power switch at once.
●If small metal objects such as needles, hairpins and coins drop into the
inside of the equipment, they may cause troubles. In this case, turn off
the power switch and unplug the Power Cord at once.
●Be sure to unplug the Power Cord when connecting the speaker.
●Be sure to use the specified cord for the speaker connection.
●Do not attempt to disassemble the unit. To prevent electric shock, do
not remove the screws or cover. There are no user-serviceable parts
inside. Refer to the qualified service personnel or system installers.
●This equipment is not waterproofed. If this unit becomes wet, turn
the power off, unplug the Power Cord and wipe carefully with the dry
cloth.
●For cleaning the body case, wipe with dry cloth. If necessary, use
wet cloth or soap water damped cloth. Do not use such chemicals as
benzine, alcohol, thinner and so forth.
●Do not block the Ventilation slots. It may cause the permanent damage
for the heating.