AudioEngine N22 User manual
Quickstart Guide
Premium Desktop Audio Amplifier
Safety Instructions
1. Please read these instructions before using this product.
2. Keep these instructions for future reference.
3. Heed all warnings on the product and in this guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth and as directed by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves or other
apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wider blade or third prong are provided for your safety.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments or accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or
sold with the apparatus. When a cart is used, use caution when moving the cart/appara-
tus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time to prevent damage to this product.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Welcome to the Audioengine family and congratulations on your
purchase of the N22 Amplifier!
Audioengine is dedicated to bringing you the highest-quality listening
experience possible and the N22 was designed with the same attention
to detail and operational simplicity as all our other products.
We wish to sincerely thank our customers and the entire Audioengine
team for the inspiration to create yet another great product.
What’s in the box
N22 power amplifier
AC power cord
USB cable
Mini-jack audio cable
RCA audio cable
Speaker wire
Cloth product bag
Cloth cable bag
Quickstart guide
Features
Powerful but compact stereo audio amplifier
High-fidelity Bluetooth® aptX HD® + extended wireless range
High-performance headphone amplifier
USB-C audio input for computers, tablets, and phones
Dual analog audio inputs
Variable preamp/subwoofer output
Integrated stand
All cables are included.
Audioengine HD4 and P4 are our recommended passive speakers. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK.)
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION
ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE
ÉLECTIQUE, NE RETIREZ PAS LE COUVERCLE (OU
L’ARRIÈRE.) IL NE SE TROUVE ÀL’INTÉRIEURAUCUNE
PIÉCE POUVANT ÊTRE RÉPARÉE PAR L’USAGER.
S’ADRESSER ÀUN REÉPARATEUR COMÉTENT.
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
AVIS
power on/o
volume control
N22N22
USB-C audio
input
audio input 2
AC power
input
subwoofer
output
Bluetooth pair
button/indicator
headphone
output
audio input 1
Volume/Power
100-240V~
50/60Hz 1.5A
Left
Right
speaker
outputs
Quick setup
Connect the included speaker wire from your passive speakers to
the N22, observing proper wire polarity to each speaker connec-
tor.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks
o.
Connect the AC power cable to the N22 rear panel and plug the
other end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth
and go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator
light on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by
disconecting N22 from your device or by pressing the Pair button
on the N22 front panel for about 3 seconds until the pair indicator
light starts flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will
pair and remember up to six dierent devices.
3
4
1
2
3
5
5
5
1
5
2
Quickstart Guide
Premium Desktop Audio Amplifier
Safety Instructions
1. Please read these instructions before using this product.
2. Keep these instructions for future reference.
3. Heed all warnings on the product and in this guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth and as directed by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves or other
apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wider blade or third prong are provided for your safety.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments or accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or
sold with the apparatus. When a cart is used, use caution when moving the cart/appara-
tus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time to prevent damage to this product.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Welcome to the Audioengine family and congratulations on your
purchase of the N22 Amplifier!
Audioengine is dedicated to bringing you the highest-quality listening
experience possible and the N22 was designed with the same attention
to detail and operational simplicity as all our other products.
We wish to sincerely thank our customers and the entire Audioengine
team for the inspiration to create yet another great product.
What’s in the box
N22 power amplifier
AC power cord
USB cable
Mini-jack audio cable
RCA audio cable
Speaker wire
Cloth product bag
Cloth cable bag
Quickstart guide
Features
Powerful but compact stereo audio amplifier
High-fidelity Bluetooth® aptX HD® + extended wireless range
High-performance headphone amplifier
USB-C audio input for computers, tablets, and phones
Dual analog audio inputs
Variable preamp/subwoofer output
Integrated stand
All cables are included.
Audioengine HD4 and P4 are our recommended passive speakers. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK.)
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION
ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE
ÉLECTIQUE, NE RETIREZ PAS LE COUVERCLE (OU
L’ARRIÈRE.) IL NE SE TROUVE ÀL’INTÉRIEURAUCUNE
PIÉCE POUVANT ÊTRE RÉPARÉE PAR L’USAGER.
S’ADRESSER ÀUN REÉPARATEUR COMÉTENT.
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
AVIS
power on/o
volume control
N22N22
USB-C audio
input
audio input 2
AC power
input
subwoofer
output
Bluetooth pair
button/indicator
headphone
output
audio input 1
Volume/Power
100-240V~
50/60Hz 1.5A
Left
Right
speaker
outputs
Quick setup
Connect the included speaker wire from your passive speakers to
the N22, observing proper wire polarity to each speaker connec-
tor.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks
o.
Connect the AC power cable to the N22 rear panel and plug the
other end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth
and go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator
light on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by
disconecting N22 from your device or by pressing the Pair button
on the N22 front panel for about 3 seconds until the pair indicator
light starts flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will
pair and remember up to six dierent devices.
3
4
1
2
3
5
5
5
1
5
2
Quickstart Guide
Premium Desktop Audio Amplifier
Safety Instructions
1. Please read these instructions before using this product.
2. Keep these instructions for future reference.
3. Heed all warnings on the product and in this guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth and as directed by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves or other
apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wider blade or third prong are provided for your safety.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments or accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or
sold with the apparatus. When a cart is used, use caution when moving the cart/appara-
tus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time to prevent damage to this product.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Welcome to the Audioengine family and congratulations on your
purchase of the N22 Amplifier!
Audioengine is dedicated to bringing you the highest-quality listening
experience possible and the N22 was designed with the same attention
to detail and operational simplicity as all our other products.
We wish to sincerely thank our customers and the entire Audioengine
team for the inspiration to create yet another great product.
What’s in the box
N22 power amplifier
AC power cord
USB cable
Mini-jack audio cable
RCA audio cable
Speaker wire
Cloth product bag
Cloth cable bag
Quickstart guide
Features
Powerful but compact stereo audio amplifier
High-fidelity Bluetooth® aptX HD® + extended wireless range
High-performance headphone amplifier
USB-C audio input for computers, tablets, and phones
Dual analog audio inputs
Variable preamp/subwoofer output
Integrated stand
All cables are included.
Audioengine HD4 and P4 are our recommended passive speakers. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK.)
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION
ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE
ÉLECTIQUE, NE RETIREZ PAS LE COUVERCLE (OU
L’ARRIÈRE.) IL NE SE TROUVE ÀL’INTÉRIEURAUCUNE
PIÉCE POUVANT ÊTRE RÉPARÉE PAR L’USAGER.
S’ADRESSER ÀUN REÉPARATEUR COMÉTENT.
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
AVIS
power on/o
volume control
N22N22
USB-C audio
input
audio input 2
AC power
input
subwoofer
output
Bluetooth pair
button/indicator
headphone
output
audio input 1
Volume/Power
100-240V~
50/60Hz 1.5A
Left
Right
speaker
outputs
Quick setup
Connect the included speaker wire from your passive speakers to
the N22, observing proper wire polarity to each speaker connec-
tor.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks
o.
Connect the AC power cable to the N22 rear panel and plug the
other end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth
and go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator
light on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by
disconecting N22 from your device or by pressing the Pair button
on the N22 front panel for about 3 seconds until the pair indicator
light starts flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will
pair and remember up to six dierent devices.
3
4
1
2
3
5
5
5
1
5
2
Quickstart Guide
Premium Desktop Audio Amplifier
Safety Instructions
1. Please read these instructions before using this product.
2. Keep these instructions for future reference.
3. Heed all warnings on the product and in this guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth and as directed by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves or other
apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wider blade or third prong are provided for your safety.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments or accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or
sold with the apparatus. When a cart is used, use caution when moving the cart/appara-
tus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time to prevent damage to this product.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Welcome to the Audioengine family and congratulations on your
purchase of the N22 Amplifier!
Audioengine is dedicated to bringing you the highest-quality listening
experience possible and the N22 was designed with the same attention
to detail and operational simplicity as all our other products.
We wish to sincerely thank our customers and the entire Audioengine
team for the inspiration to create yet another great product.
What’s in the box
N22 power amplifier
AC power cord
USB cable
Mini-jack audio cable
RCA audio cable
Speaker wire
Cloth product bag
Cloth cable bag
Quickstart guide
Features
Powerful but compact stereo audio amplifier
High-fidelity Bluetooth® aptX HD® + extended wireless range
High-performance headphone amplifier
USB-C audio input for computers, tablets, and phones
Dual analog audio inputs
Variable preamp/subwoofer output
Integrated stand
All cables are included.
Audioengine HD4 and P4 are our recommended passive speakers. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK.)
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION
ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE
ÉLECTIQUE, NE RETIREZ PAS LE COUVERCLE (OU
L’ARRIÈRE.) IL NE SE TROUVE ÀL’INTÉRIEURAUCUNE
PIÉCE POUVANT ÊTRE RÉPARÉE PAR L’USAGER.
S’ADRESSER ÀUN REÉPARATEUR COMÉTENT.
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
AVIS
power on/o
volume control
N22N22
USB-C audio
input
audio input 2
AC power
input
subwoofer
output
Bluetooth pair
button/indicator
headphone
output
audio input 1
Volume/Power
100-240V~
50/60Hz 1.5A
Left
Right
speaker
outputs
Quick setup
Connect the included speaker wire from your passive speakers to
the N22, observing proper wire polarity to each speaker connec-
tor.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks
o.
Connect the AC power cable to the N22 rear panel and plug the
other end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth
and go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator
light on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by
disconecting N22 from your device or by pressing the Pair button
on the N22 front panel for about 3 seconds until the pair indicator
light starts flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will
pair and remember up to six dierent devices.
3
4
1
2
3
5
5
5
1
5
2
Quickstart Guide
Premium Desktop Audio Amplifier
Safety Instructions
1. Please read these instructions before using this product.
2. Keep these instructions for future reference.
3. Heed all warnings on the product and in this guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth and as directed by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves or other
apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wider blade or third prong are provided for your safety.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments or accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or
sold with the apparatus. When a cart is used, use caution when moving the cart/appara-
tus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time to prevent damage to this product.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Welcome to the Audioengine family and congratulations on your
purchase of the N22 Amplifier!
Audioengine is dedicated to bringing you the highest-quality listening
experience possible and the N22 was designed with the same attention
to detail and operational simplicity as all our other products.
We wish to sincerely thank our customers and the entire Audioengine
team for the inspiration to create yet another great product.
What’s in the box
N22 power amplifier
AC power cord
USB cable
Mini-jack audio cable
RCA audio cable
Speaker wire
Cloth product bag
Cloth cable bag
Quickstart guide
Features
Powerful but compact stereo audio amplifier
High-fidelity Bluetooth® aptX HD® + extended wireless range
High-performance headphone amplifier
USB-C audio input for computers, tablets, and phones
Dual analog audio inputs
Variable preamp/subwoofer output
Integrated stand
All cables are included.
Audioengine HD4 and P4 are our recommended passive speakers. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK.)
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION
ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE
ÉLECTIQUE, NE RETIREZ PAS LE COUVERCLE (OU
L’ARRIÈRE.) IL NE SE TROUVE ÀL’INTÉRIEURAUCUNE
PIÉCE POUVANT ÊTRE RÉPARÉE PAR L’USAGER.
S’ADRESSER ÀUN REÉPARATEUR COMÉTENT.
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
AVIS
power on/o
volume control
N22N22
USB-C audio
input
audio input 2
AC power
input
subwoofer
output
Bluetooth pair
button/indicator
headphone
output
audio input 1
Volume/Power
100-240V~
50/60Hz 1.5A
Left
Right
speaker
outputs
Quick setup
Connect the included speaker wire from your passive speakers to
the N22, observing proper wire polarity to each speaker connec-
tor.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks
o.
Connect the AC power cable to the N22 rear panel and plug the
other end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth
and go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator
light on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by
disconecting N22 from your device or by pressing the Pair button
on the N22 front panel for about 3 seconds until the pair indicator
light starts flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will
pair and remember up to six dierent devices.
3
4
1
2
3
5
5
5
1
5
2
Quickstart Guide
Premium Desktop Audio Amplifier
Safety Instructions
1. Please read these instructions before using this product.
2. Keep these instructions for future reference.
3. Heed all warnings on the product and in this guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth and as directed by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves or other
apparatus that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wider blade or third prong are provided for your safety.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments or accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or
sold with the apparatus. When a cart is used, use caution when moving the cart/appara-
tus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time to prevent damage to this product.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Operating Temperature Range: 32° to 104°F (0° to 40°C)
Welcome to the Audioengine family and congratulations on your
purchase of the N22 Amplifier!
Audioengine is dedicated to bringing you the highest-quality listening
experience possible and the N22 was designed with the same attention
to detail and operational simplicity as all our other products.
We wish to sincerely thank our customers and the entire Audioengine
team for the inspiration to create yet another great product.
What’s in the box
N22 power amplifier
AC power cord
USB cable
Mini-jack audio cable
RCA audio cable
Speaker wire
Cloth product bag
Cloth cable bag
Quickstart guide
Features
Powerful but compact stereo audio amplifier
High-fidelity Bluetooth® aptX HD® + extended wireless range
High-performance headphone amplifier
USB-C audio input for computers, tablets, and phones
Dual analog audio inputs
Variable preamp/subwoofer output
Integrated stand
All cables are included.
Audioengine HD4 and P4 are our recommended passive speakers. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK.)
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION
ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE
ÉLECTIQUE, NE RETIREZ PAS LE COUVERCLE (OU
L’ARRIÈRE.) IL NE SE TROUVE ÀL’INTÉRIEURAUCUNE
PIÉCE POUVANT ÊTRE RÉPARÉE PAR L’USAGER.
S’ADRESSER ÀUN REÉPARATEUR COMÉTENT.
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
AVIS
power on/o
volume control
N22N22
USB-C audio
input
audio input 2
AC power
input
subwoofer
output
Bluetooth pair
button/indicator
headphone
output
audio input 1
Volume/Power
100-240V~
50/60Hz 1.5A
Left
Right
speaker
outputs
Quick setup
Connect the included speaker wire from your passive speakers to
the N22, observing proper wire polarity to each speaker connec-
tor.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks
o.
Connect the AC power cable to the N22 rear panel and plug the
other end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth
and go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator
light on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by
disconecting N22 from your device or by pressing the Pair button
on the N22 front panel for about 3 seconds until the pair indicator
light starts flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will
pair and remember up to six dierent devices.
3
4
1
2
3
5
5
5
1
5
2
Warranty information
All Audioengine products have a 3-year Limited Warranty on parts and
labor from date of purchase. The Limited Warranty applies only to
Audioengine products purchased in the United States. Your warranty is
automatic, so there is no need to register. For Limited Warranty coverage
elsewhere, please contact the Audioengine dealer, reseller, or distributor
in your country or region.
What is covered
All defective parts or faulty workmanship.
What is not covered
The Audioengine Limited Warranty does not cover damage caused by
accident, misuse, abuse, neglect, excessive moisture, lightning, power
surges, other acts of nature, unauthorized product modification or repairs,
or failure to follow the instructions outlined in this guide.
What we will do
We will repair or replace any defective parts, at our option, within a
reasonable amount of time and free of charge any time during the
warranty period. Aer service, we will be responsible for shipping the
product back to you at our expense.
What we ask from you
You will be responsible for shipping charges to Audioengine or to an
authorized dealer. We recommend you keep the original shipping
materials to prevent shipping damage if service is needed. Audioengine
cannot be responsible for any damages incurred during shipping due to
poor packing, so please pack well and make sure to insure your shipment.
How to obtain Audioengine warranty service
If you have any questions or feel you may need service, contact the
reseller where you purchased your product. You can also visit our
support portal at audioengine.com/support-inquiry, where you will find a
searchable Knowledge Base. And if you don’t find an answer to your
question you can easily contact us by opening a support ticket.
We will do everything we can to answer your questions and resolve any
issues as quickly as possible.
Exclusive remedy
This Limited Warranty is fully transferable provided the current owner
furnishes the proof of purchase and that the serial number on the
product is intact. THE MAXIMUM LIABILITY OF AUDIOENGINE SHALL NOT
EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
IN NO EVENT SHALL AUDIOENGINE BE LIABLE FOR SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES.
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as
we've had creating them. However, should you have an issue or are not
satisfied with any Audioengine product for any reason contact the
reseller where you purchased or contact us directly:
support@audioengine.com
About Audioengine
Audioengine designs and builds innovative audio products with all your
music in mind. Great sound, simple but elegant designs, high-quality
materials and truly useful features are what Audioengine is about. We
sincerely hope you get as much enjoyment from our products as we’ve
had creating them!
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household waste
at its end-of-life. Instead, the product should be handed over to
the applicable collection point for the recycling in accordance
with your national legislation.
By disposing of this product correctly, you will help to conserve the
environment and human health that could otherwise be caused by
inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your
household waste disposal service or the shop where you purchased the
product. Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
©2023 Audioengine, LLC. All Rights Reserved.
Audioengine and Audioengine N22 are trademarks of Audioengine.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth
SIG, Inc. and are used by Audioengine under license.
The aptX® mark and logos are registered trademarks of Qualcomm Technolo-
gies International, Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other product names, company names and logos mentioned may be the
trademarks of their respective owners and are acknowledged by Audioengine.
Quick setup
Connect the included speaker wire from your passive speakers to the
N22, observing proper wire polarity to each speaker connector.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks o.
Connect the AC power cable to the N22 rear panel and plug the other
end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth and
go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator light
on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by disconect-
ing N22 from your device or by pressing the Pair button on the N22
front panel for about 3 seconds until the pair indicator light starts
flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will pair
and remember up to six dierent devices.
Wired connection
Connect one of the included audio cables between your device and
the input on the N22 rear panel.
Play music and adjust the volume on the N22 and your device to your
desired listening levels.
3
4
1
2
3
5
5
5
1
5
2
USB connection
Connect the included USB cable between your computer, phone, or tablet
and the USB input on the rear panel of the N22.
If using Windows, N22 should be recognized automatically. For MacOS,
under System Preferences/Sound/Output, select “Audioengine N22”.
Inputs and volume settings
Multiple devices may be connected to the speakers at the same time and
the wireless and aux inputs are open and active, so it’s easy to switch
between your phone, tablet, computer, TV, etc.
To adjust the volume, we recommend you first set a level on N22 and then
use the volume control on your device to adjust the overall level. Volume
settings are flexible and there is no right or wrong so feel free to experiment
to find what works for you.
Variable audio output
N22 includes a variable full-range preamp audio output so you can
connect a subwoofer , wireless adapter, or another music sytem. The N22
output is adjustable so the volume level can be controlled from the N22
front panel.
Need help?
Extra tips, troubleshooting, FAQs and updates to this guide can be found
on our website:
audioengine.com/support-inquiry
And if you have questions or need help, please contact our customer
support team: audioengine.com/support-inquiry
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as we've
had creating them. However, should you have an issue or are not satisfied
with any Audioengine product for any reason contact the reseller where
you purchased or contact us directly: support@audioengine.com
1
2
1
2
Warranty information
All Audioengine products have a 3-year Limited Warranty on parts and
labor from date of purchase. The Limited Warranty applies only to
Audioengine products purchased in the United States. Your warranty is
automatic, so there is no need to register. For Limited Warranty coverage
elsewhere, please contact the Audioengine dealer, reseller, or distributor
in your country or region.
What is covered
All defective parts or faulty workmanship.
What is not covered
The Audioengine Limited Warranty does not cover damage caused by
accident, misuse, abuse, neglect, excessive moisture, lightning, power
surges, other acts of nature, unauthorized product modification or repairs,
or failure to follow the instructions outlined in this guide.
What we will do
We will repair or replace any defective parts, at our option, within a
reasonable amount of time and free of charge any time during the
warranty period. Aer service, we will be responsible for shipping the
product back to you at our expense.
What we ask from you
You will be responsible for shipping charges to Audioengine or to an
authorized dealer. We recommend you keep the original shipping
materials to prevent shipping damage if service is needed. Audioengine
cannot be responsible for any damages incurred during shipping due to
poor packing, so please pack well and make sure to insure your shipment.
How to obtain Audioengine warranty service
If you have any questions or feel you may need service, contact the
reseller where you purchased your product. You can also visit our
support portal at audioengine.com/support-inquiry, where you will find a
searchable Knowledge Base. And if you don’t find an answer to your
question you can easily contact us by opening a support ticket.
We will do everything we can to answer your questions and resolve any
issues as quickly as possible.
Exclusive remedy
This Limited Warranty is fully transferable provided the current owner
furnishes the proof of purchase and that the serial number on the
product is intact. THE MAXIMUM LIABILITY OF AUDIOENGINE SHALL NOT
EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
IN NO EVENT SHALL AUDIOENGINE BE LIABLE FOR SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES.
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as
we've had creating them. However, should you have an issue or are not
satisfied with any Audioengine product for any reason contact the
reseller where you purchased or contact us directly:
support@audioengine.com
About Audioengine
Audioengine designs and builds innovative audio products with all your
music in mind. Great sound, simple but elegant designs, high-quality
materials and truly useful features are what Audioengine is about. We
sincerely hope you get as much enjoyment from our products as we’ve
had creating them!
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household waste
at its end-of-life. Instead, the product should be handed over to
the applicable collection point for the recycling in accordance
with your national legislation.
By disposing of this product correctly, you will help to conserve the
environment and human health that could otherwise be caused by
inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your
household waste disposal service or the shop where you purchased the
product. Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
©2023 Audioengine, LLC. All Rights Reserved.
Audioengine and Audioengine N22 are trademarks of Audioengine.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth
SIG, Inc. and are used by Audioengine under license.
The aptX® mark and logos are registered trademarks of Qualcomm Technolo-
gies International, Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other product names, company names and logos mentioned may be the
trademarks of their respective owners and are acknowledged by Audioengine.
Quick setup
Connect the included speaker wire from your passive speakers to the
N22, observing proper wire polarity to each speaker connector.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks o.
Connect the AC power cable to the N22 rear panel and plug the other
end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth and
go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator light
on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by disconect-
ing N22 from your device or by pressing the Pair button on the N22
front panel for about 3 seconds until the pair indicator light starts
flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will pair
and remember up to six dierent devices.
Wired connection
Connect one of the included audio cables between your device and
the input on the N22 rear panel.
Play music and adjust the volume on the N22 and your device to your
desired listening levels.
3
4
1
2
3
5
5
5
1
5
2
USB connection
Connect the included USB cable between your computer, phone, or tablet
and the USB input on the rear panel of the N22.
If using Windows, N22 should be recognized automatically. For MacOS,
under System Preferences/Sound/Output, select “Audioengine N22”.
Inputs and volume settings
Multiple devices may be connected to the speakers at the same time and
the wireless and aux inputs are open and active, so it’s easy to switch
between your phone, tablet, computer, TV, etc.
To adjust the volume, we recommend you first set a level on N22 and then
use the volume control on your device to adjust the overall level. Volume
settings are flexible and there is no right or wrong so feel free to experiment
to find what works for you.
Variable audio output
N22 includes a variable full-range preamp audio output so you can
connect a subwoofer , wireless adapter, or another music sytem. The N22
output is adjustable so the volume level can be controlled from the N22
front panel.
Need help?
Extra tips, troubleshooting, FAQs and updates to this guide can be found
on our website:
audioengine.com/support-inquiry
And if you have questions or need help, please contact our customer
support team: audioengine.com/support-inquiry
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as we've
had creating them. However, should you have an issue or are not satisfied
with any Audioengine product for any reason contact the reseller where
1
2
1
2
Warranty information
All Audioengine products have a 3-year Limited Warranty on parts and
labor from date of purchase. The Limited Warranty applies only to
Audioengine products purchased in the United States. Your warranty is
automatic, so there is no need to register. For Limited Warranty coverage
elsewhere, please contact the Audioengine dealer, reseller, or distributor
in your country or region.
What is covered
All defective parts or faulty workmanship.
What is not covered
The Audioengine Limited Warranty does not cover damage caused by
accident, misuse, abuse, neglect, excessive moisture, lightning, power
surges, other acts of nature, unauthorized product modification or repairs,
or failure to follow the instructions outlined in this guide.
What we will do
We will repair or replace any defective parts, at our option, within a
reasonable amount of time and free of charge any time during the
warranty period. Aer service, we will be responsible for shipping the
product back to you at our expense.
What we ask from you
You will be responsible for shipping charges to Audioengine or to an
authorized dealer. We recommend you keep the original shipping
materials to prevent shipping damage if service is needed. Audioengine
cannot be responsible for any damages incurred during shipping due to
poor packing, so please pack well and make sure to insure your shipment.
How to obtain Audioengine warranty service
If you have any questions or feel you may need service, contact the
reseller where you purchased your product. You can also visit our
support portal at audioengine.com/support-inquiry, where you will find a
searchable Knowledge Base. And if you don’t find an answer to your
question you can easily contact us by opening a support ticket.
We will do everything we can to answer your questions and resolve any
issues as quickly as possible.
Exclusive remedy
This Limited Warranty is fully transferable provided the current owner
furnishes the proof of purchase and that the serial number on the
product is intact. THE MAXIMUM LIABILITY OF AUDIOENGINE SHALL NOT
EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
IN NO EVENT SHALL AUDIOENGINE BE LIABLE FOR SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES.
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as
we've had creating them. However, should you have an issue or are not
satisfied with any Audioengine product for any reason contact the
reseller where you purchased or contact us directly:
support@audioengine.com
About Audioengine
Audioengine designs and builds innovative audio products with all your
music in mind. Great sound, simple but elegant designs, high-quality
materials and truly useful features are what Audioengine is about. We
sincerely hope you get as much enjoyment from our products as we’ve
had creating them!
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household waste
at its end-of-life. Instead, the product should be handed over to
the applicable collection point for the recycling in accordance
with your national legislation.
By disposing of this product correctly, you will help to conserve the
environment and human health that could otherwise be caused by
inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your
household waste disposal service or the shop where you purchased the
product. Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
©2023 Audioengine, LLC. All Rights Reserved.
Audioengine and Audioengine N22 are trademarks of Audioengine.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth
SIG, Inc. and are used by Audioengine under license.
The aptX® mark and logos are registered trademarks of Qualcomm Technolo-
gies International, Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other product names, company names and logos mentioned may be the
trademarks of their respective owners and are acknowledged by Audioengine.
Quick setup
Connect the included speaker wire from your passive speakers to the
N22, observing proper wire polarity to each speaker connector.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks o.
Connect the AC power cable to the N22 rear panel and plug the other
end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth and
go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator light
on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by disconect-
ing N22 from your device or by pressing the Pair button on the N22
front panel for about 3 seconds until the pair indicator light starts
flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will pair
and remember up to six dierent devices.
Wired connection
Connect one of the included audio cables between your device and
the input on the N22 rear panel.
Play music and adjust the volume on the N22 and your device to your
desired listening levels.
3
4
1
2
3
5
5
5
1
5
2
USB connection
Connect the included USB cable between your computer, phone, or tablet
and the USB input on the rear panel of the N22.
If using Windows, N22 should be recognized automatically. For MacOS,
under System Preferences/Sound/Output, select “Audioengine N22”.
Inputs and volume settings
Multiple devices may be connected to the speakers at the same time and
the wireless and aux inputs are open and active, so it’s easy to switch
between your phone, tablet, computer, TV, etc.
To adjust the volume, we recommend you first set a level on N22 and then
use the volume control on your device to adjust the overall level. Volume
settings are flexible and there is no right or wrong so feel free to experiment
to find what works for you.
Variable audio output
N22 includes a variable full-range preamp audio output so you can
connect a subwoofer , wireless adapter, or another music sytem. The N22
output is adjustable so the volume level can be controlled from the N22
front panel.
Need help?
Extra tips, troubleshooting, FAQs and updates to this guide can be found
on our website:
audioengine.com/support-inquiry
And if you have questions or need help, please contact our customer
support team: audioengine.com/support-inquiry
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as we've
had creating them. However, should you have an issue or are not satisfied
with any Audioengine product for any reason contact the reseller where
1
2
1
2
Warranty information
All Audioengine products have a 3-year Limited Warranty on parts and
labor from date of purchase. The Limited Warranty applies only to
Audioengine products purchased in the United States. Your warranty is
automatic, so there is no need to register. For Limited Warranty coverage
elsewhere, please contact the Audioengine dealer, reseller, or distributor
in your country or region.
What is covered
All defective parts or faulty workmanship.
What is not covered
The Audioengine Limited Warranty does not cover damage caused by
accident, misuse, abuse, neglect, excessive moisture, lightning, power
surges, other acts of nature, unauthorized product modification or repairs,
or failure to follow the instructions outlined in this guide.
What we will do
We will repair or replace any defective parts, at our option, within a
reasonable amount of time and free of charge any time during the
warranty period. Aer service, we will be responsible for shipping the
product back to you at our expense.
What we ask from you
You will be responsible for shipping charges to Audioengine or to an
authorized dealer. We recommend you keep the original shipping
materials to prevent shipping damage if service is needed. Audioengine
cannot be responsible for any damages incurred during shipping due to
poor packing, so please pack well and make sure to insure your shipment.
How to obtain Audioengine warranty service
If you have any questions or feel you may need service, contact the
reseller where you purchased your product. You can also visit our
support portal at audioengine.com/support-inquiry, where you will find a
searchable Knowledge Base. And if you don’t find an answer to your
question you can easily contact us by opening a support ticket.
We will do everything we can to answer your questions and resolve any
issues as quickly as possible.
Exclusive remedy
This Limited Warranty is fully transferable provided the current owner
furnishes the proof of purchase and that the serial number on the
product is intact. THE MAXIMUM LIABILITY OF AUDIOENGINE SHALL NOT
EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
IN NO EVENT SHALL AUDIOENGINE BE LIABLE FOR SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES.
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as
we've had creating them. However, should you have an issue or are not
satisfied with any Audioengine product for any reason contact the
reseller where you purchased or contact us directly:
About Audioengine
Audioengine designs and builds innovative audio products with all your
music in mind. Great sound, simple but elegant designs, high-quality
materials and truly useful features are what Audioengine is about. We
sincerely hope you get as much enjoyment from our products as we’ve
had creating them!
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household waste
at its end-of-life. Instead, the product should be handed over to
the applicable collection point for the recycling in accordance
with your national legislation.
By disposing of this product correctly, you will help to conserve the
environment and human health that could otherwise be caused by
inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your
household waste disposal service or the shop where you purchased the
product. Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
©2023 Audioengine, LLC. All Rights Reserved.
Audioengine and Audioengine N22 are trademarks of Audioengine.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth
SIG, Inc. and are used by Audioengine under license.
The aptX® mark and logos are registered trademarks of Qualcomm Technolo-
gies International, Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other product names, company names and logos mentioned may be the
trademarks of their respective owners and are acknowledged by Audioengine.
Quick setup
Connect the included speaker wire from your passive speakers to the
N22, observing proper wire polarity to each speaker connector.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks o.
Connect the AC power cable to the N22 rear panel and plug the other
end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth and
go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator light
on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by disconect-
ing N22 from your device or by pressing the Pair button on the N22
front panel for about 3 seconds until the pair indicator light starts
flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will pair
and remember up to six dierent devices.
Wired connection
Connect one of the included audio cables between your device and
the input on the N22 rear panel.
Play music and adjust the volume on the N22 and your device to your
desired listening levels.
3
4
1
2
3
5
5
5
1
5
2
USB connection
Connect the included USB cable between your computer, phone, or tablet
and the USB input on the rear panel of the N22.
If using Windows, N22 should be recognized automatically. For MacOS,
under System Preferences/Sound/Output, select “Audioengine N22”.
Inputs and volume settings
Multiple devices may be connected to the speakers at the same time and
the wireless and aux inputs are open and active, so it’s easy to switch
between your phone, tablet, computer, TV, etc.
To adjust the volume, we recommend you first set a level on N22 and then
use the volume control on your device to adjust the overall level. Volume
settings are flexible and there is no right or wrong so feel free to experiment
to find what works for you.
Variable audio output
N22 includes a variable full-range preamp audio output so you can
connect a subwoofer , wireless adapter, or another music sytem. The N22
output is adjustable so the volume level can be controlled from the N22
front panel.
Need help?
Extra tips, troubleshooting, FAQs and updates to this guide can be found
on our website:
audioengine.com/support-inquiry
And if you have questions or need help, please contact our customer
support team: audioengine.com/support-inquiry
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as we've
had creating them. However, should you have an issue or are not satisfied
with any Audioengine product for any reason contact the reseller where
1
2
1
2
Warranty information
All Audioengine products have a 3-year Limited Warranty on parts and
labor from date of purchase. The Limited Warranty applies only to
Audioengine products purchased in the United States. Your warranty is
automatic, so there is no need to register. For Limited Warranty coverage
elsewhere, please contact the Audioengine dealer, reseller, or distributor
in your country or region.
What is covered
All defective parts or faulty workmanship.
What is not covered
The Audioengine Limited Warranty does not cover damage caused by
accident, misuse, abuse, neglect, excessive moisture, lightning, power
surges, other acts of nature, unauthorized product modification or repairs,
or failure to follow the instructions outlined in this guide.
What we will do
We will repair or replace any defective parts, at our option, within a
reasonable amount of time and free of charge any time during the
warranty period. Aer service, we will be responsible for shipping the
product back to you at our expense.
What we ask from you
You will be responsible for shipping charges to Audioengine or to an
authorized dealer. We recommend you keep the original shipping
materials to prevent shipping damage if service is needed. Audioengine
cannot be responsible for any damages incurred during shipping due to
poor packing, so please pack well and make sure to insure your shipment.
How to obtain Audioengine warranty service
If you have any questions or feel you may need service, contact the
reseller where you purchased your product. You can also visit our
support portal at audioengine.com/support-inquiry, where you will find a
searchable Knowledge Base. And if you don’t find an answer to your
question you can easily contact us by opening a support ticket.
We will do everything we can to answer your questions and resolve any
issues as quickly as possible.
Exclusive remedy
This Limited Warranty is fully transferable provided the current owner
furnishes the proof of purchase and that the serial number on the
product is intact. THE MAXIMUM LIABILITY OF AUDIOENGINE SHALL NOT
EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
IN NO EVENT SHALL AUDIOENGINE BE LIABLE FOR SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES.
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as
we've had creating them. However, should you have an issue or are not
satisfied with any Audioengine product for any reason contact the
reseller where you purchased or contact us directly:
About Audioengine
Audioengine designs and builds innovative audio products with all your
music in mind. Great sound, simple but elegant designs, high-quality
materials and truly useful features are what Audioengine is about. We
sincerely hope you get as much enjoyment from our products as we’ve
had creating them!
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household waste
at its end-of-life. Instead, the product should be handed over to
the applicable collection point for the recycling in accordance
with your national legislation.
By disposing of this product correctly, you will help to conserve the
environment and human health that could otherwise be caused by
inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your
household waste disposal service or the shop where you purchased the
product. Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
©2023 Audioengine, LLC. All Rights Reserved.
Audioengine and Audioengine N22 are trademarks of Audioengine.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth
SIG, Inc. and are used by Audioengine under license.
The aptX® mark and logos are registered trademarks of Qualcomm Technolo-
gies International, Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other product names, company names and logos mentioned may be the
trademarks of their respective owners and are acknowledged by Audioengine.
Quick setup
Connect the included speaker wire from your passive speakers to the
N22, observing proper wire polarity to each speaker connector.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks o.
Connect the AC power cable to the N22 rear panel and plug the other
end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth and
go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator light
on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by disconect-
ing N22 from your device or by pressing the Pair button on the N22
front panel for about 3 seconds until the pair indicator light starts
flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will pair
and remember up to six dierent devices.
Wired connection
Connect one of the included audio cables between your device and
the input on the N22 rear panel.
Play music and adjust the volume on the N22 and your device to your
desired listening levels.
3
4
1
2
3
5
5
5
1
5
2
USB connection
Connect the included USB cable between your computer, phone, or tablet
and the USB input on the rear panel of the N22.
If using Windows, N22 should be recognized automatically. For MacOS,
under System Preferences/Sound/Output, select “Audioengine N22”.
Inputs and volume settings
Multiple devices may be connected to the speakers at the same time and
the wireless and aux inputs are open and active, so it’s easy to switch
between your phone, tablet, computer, TV, etc.
To adjust the volume, we recommend you first set a level on N22 and then
use the volume control on your device to adjust the overall level. Volume
settings are flexible and there is no right or wrong so feel free to experiment
to find what works for you.
Variable audio output
N22 includes a variable full-range preamp audio output so you can
connect a subwoofer , wireless adapter, or another music sytem. The N22
output is adjustable so the volume level can be controlled from the N22
front panel.
Need help?
Extra tips, troubleshooting, FAQs and updates to this guide can be found
on our website:
audioengine.com/support-inquiry
And if you have questions or need help, please contact our customer
support team: audioengine.com/support-inquiry
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as we've
had creating them. However, should you have an issue or are not satisfied
with any Audioengine product for any reason contact the reseller where
1
2
1
2
Warranty information
All Audioengine products have a 3-year Limited Warranty on parts and
labor from date of purchase. The Limited Warranty applies only to
Audioengine products purchased in the United States. Your warranty is
automatic, so there is no need to register. For Limited Warranty coverage
elsewhere, please contact the Audioengine dealer, reseller, or distributor
in your country or region.
What is covered
All defective parts or faulty workmanship.
What is not covered
The Audioengine Limited Warranty does not cover damage caused by
accident, misuse, abuse, neglect, excessive moisture, lightning, power
surges, other acts of nature, unauthorized product modification or repairs,
or failure to follow the instructions outlined in this guide.
What we will do
We will repair or replace any defective parts, at our option, within a
reasonable amount of time and free of charge any time during the
warranty period. Aer service, we will be responsible for shipping the
product back to you at our expense.
What we ask from you
You will be responsible for shipping charges to Audioengine or to an
authorized dealer. We recommend you keep the original shipping
materials to prevent shipping damage if service is needed. Audioengine
cannot be responsible for any damages incurred during shipping due to
poor packing, so please pack well and make sure to insure your shipment.
How to obtain Audioengine warranty service
If you have any questions or feel you may need service, contact the
reseller where you purchased your product. You can also visit our
support portal at audioengine.com/support-inquiry, where you will find a
searchable Knowledge Base. And if you don’t find an answer to your
question you can easily contact us by opening a support ticket.
We will do everything we can to answer your questions and resolve any
issues as quickly as possible.
Exclusive remedy
This Limited Warranty is fully transferable provided the current owner
furnishes the proof of purchase and that the serial number on the
product is intact. THE MAXIMUM LIABILITY OF AUDIOENGINE SHALL NOT
EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
IN NO EVENT SHALL AUDIOENGINE BE LIABLE FOR SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES.
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as
we've had creating them. However, should you have an issue or are not
satisfied with any Audioengine product for any reason contact the
reseller where you purchased or contact us directly:
About Audioengine
Audioengine designs and builds innovative audio products with all your
music in mind. Great sound, simple but elegant designs, high-quality
materials and truly useful features are what Audioengine is about. We
sincerely hope you get as much enjoyment from our products as we’ve
had creating them!
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household waste
at its end-of-life. Instead, the product should be handed over to
the applicable collection point for the recycling in accordance
with your national legislation.
By disposing of this product correctly, you will help to conserve the
environment and human health that could otherwise be caused by
inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your
household waste disposal service or the shop where you purchased the
product. Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
- Consult the dealer or an experienced technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
©2023 Audioengine, LLC. All Rights Reserved.
Audioengine and Audioengine N22 are trademarks of Audioengine.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth
SIG, Inc. and are used by Audioengine under license.
The aptX® mark and logos are registered trademarks of Qualcomm Technolo-
gies International, Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All other product names, company names and logos mentioned may be the
trademarks of their respective owners and are acknowledged by Audioengine.
Quick setup
Connect the included speaker wire from your passive speakers to the
N22, observing proper wire polarity to each speaker connector.
Verify that the volume/power knob on the rear panel of the le
speaker is in the OFF position by rotating the knob until it clicks o.
Connect the AC power cable to the N22 rear panel and plug the other
end of the cable into a functioning power outlet.
Wireless connection
Turn power on via the front panel volume/power knob.
N22 will automatically go into Bluetooth “pair mode” and the Pair
button on the rear panel will start flashing.
On your device (phone, tablet, computer, etc) turn on Bluetooth and
go to Bluetooth preferences.
Select “Audioengine N22” to pair and connect. The Pair indicator light
on the N22 front panel should now be on solid.
Play your music and adjust volume levels for N22 and your device.
To add additional devices put N22 back into pair mode by disconect-
ing N22 from your device or by pressing the Pair button on the N22
front panel for about 3 seconds until the pair indicator light starts
flashing. Repeat steps 2 & 3 to connect another device.
N22 wirelessly connects to one device at a time, however it will pair
and remember up to six dierent devices.
Wired connection
Connect one of the included audio cables between your device and
the input on the N22 rear panel.
Play music and adjust the volume on the N22 and your device to your
desired listening levels.
3
4
1
2
3
5
5
5
1
5
2
USB connection
Connect the included USB cable between your computer, phone, or tablet
and the USB input on the rear panel of the N22.
If using Windows, N22 should be recognized automatically. For MacOS,
under System Preferences/Sound/Output, select “Audioengine N22”.
Inputs and volume settings
Multiple devices may be connected to the speakers at the same time and
the wireless and aux inputs are open and active, so it’s easy to switch
between your phone, tablet, computer, TV, etc.
To adjust the volume, we recommend you first set a level on N22 and then
use the volume control on your device to adjust the overall level. Volume
settings are flexible and there is no right or wrong so feel free to experiment
to find what works for you.
Variable audio output
N22 includes a variable full-range preamp audio output so you can
connect a subwoofer , wireless adapter, or another music sytem. The N22
output is adjustable so the volume level can be controlled from the N22
front panel.
Need help?
Extra tips, troubleshooting, FAQs and updates to this guide can be found
on our website:
audioengine.com/support-inquiry
And if you have questions or need help, please contact our customer
support team: audioengine.com/support-inquiry
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as we've
had creating them. However, should you have an issue or are not satisfied
with any Audioengine product for any reason contact the reseller where
1
2
1
2
Other manuals for N22
1
Table of contents
Other AudioEngine Amplifier manuals
