AV/VC One AVS/021/SMK1 User manual

REFER ALSO TO MAIN
INSTALLATION INSTRUCTIONS
FOR AV/VC ONE
AVS/021/SMK1PARTS INCLUDED:
Installation Instructions for
AV/VC One Screen Mount Kit
VESA Rail x2 Hex Nut x2
Washer x4
Screw x2
IMPORTANT NOTE
For dual screen installations you
will require 2x AVS/021/SMK1
Screen Frame
WARNING
• Single screen installation: 80” max size. 60kg (132lbs) max weight.
• Dual screen installation: 65” max size. 60kg (132lbs) max weight.
• Use with products heavier than the maximum weights indicated may result
in instability causing possible injury.
• Correct installation is essential to safe and reliable operation of the
AV/VC One product and falls outside the scope of responsibility
of Colebrook Bosson Saunders. Please follow assembly instructions carefully.
• Do not use this product for any purpose other than that for which it
was designed.
• Ensure that oor or wall surface is strong enough to support the weight of
the fully-loaded AV/VC One and that the oor surface is at and level.
• Do not install AV/VC One outdoors or in environments where it will be
directly exposed to moisture or highwinds.
• Follow the manufacturer’s guidance for mounting of monitors, displays
and other equipment.
• Please take care to avoid trapping ngers when installing or adjusting
the product.
AVS-021-SMK1-INST-A-MAY 2016
AVS/021/SMK1
ELECTRICAL SAFETY
• Safe installation of electrical equipment is the responsibility of the installer.
• Colebrook Bosson Saunders recommends that only double-insulated
electrical equipment and cables are installed in AV/VC One unit.
MAINTENANCE AND INSPECTION
• Ensure all screws and xings are fully tightened and occasionally re-tighten if necessary.
• Clean with a dampcloth. DO NOT use solvents.
DISCLAIMER
As part of Colebrook Bosson Saunders ongoing product improvement
programme, the design of products may change without prior notice and
details may vary from those illustrated.
VESA xing kit

Single screen or dual screen configuration?
60Kg
MAx wEIghT
(132lbs)
60Kg
MAx wEIghT
(132lbs)
60Kg
MAx wEIghT
(132lbs)
SINgLE SCREEN INSTALLATION
80” MAx SIzE
60Kg (132LbS) MAx wEIghT
DUAL SCREEN INSTALLATION
65” MAx SIzE
60Kg (132LbS) MAx wEIghT
IMPORTANT
Warnings & product
overview
Warnings & product
overview
80” max size 65” max size 65” max size
IT IS RECOMMENDED ThAT SCREENS ARE REMOVED bEFORE MOVINg ThE AV/VC ONE UNIT
FOR SINgLE SCREEN
INSTALLATION
gO TO SECTION
1
FOR DUAL SCREEN
INSTALLATION
gO TO SECTION
4
IMPORTANT NOTE
Note that screen sizes larger than 65” may be
mounted in dual screen conguration but only if
the AV/VC One is stabilised by securing to the
wall (or building structure) using the AV/VC One
Wall Brace Kit (Product Code: AVS/021/WBK1)
Note that maximum screen weight limits still
apply, regardless of screen size.

INSTALL SCREEN FRAME TO SCREEN SUPPORT BRACKETS
1.1
Install single frame to column 1
FIX SCREEN FRAME TO SCREEN SUPPORT BRACKETS
1.2
IMPORTANT NOTE
Ensure all brackets slide
into rectangular cutouts
IMPORTANT NOTE
Ensure both fixing screws
are fully tightened
1.1A 1.1b
1.1C

PLAN MOUNTING POSITION (IF NECESSARY)
FIX VESA RAILS TO THE SCREEN
2.1
2.2
Mount VESA rails to the screen 2
Depending on the VESA size of
your screen, you may need to
consider the mounting position of
the VESA rails. This will ensure
the correct final screen position
Note orientation of VESA
rails in relation to screen
INSTALLING A CAMERA MOUNT?
AVS/021/CAM1
AV/VC One - Camera Mount Kit
2KG/4.4 LBS
AV/VC One
SMK instructions
IMPORTANT NOTE
Carefully select fixing
screws to suit screen
being mounted
TOP
If your AV/VC One installation requires
a Camera Mount please install it at this
stage bEFORE mounting the screens
YOU wILL NEED:
AV/VC One - Camera Mount Kit
AVS/021/CAM1
SEE INSTALLATION
INSTRUCTIONS
SUPPLIED wITh
CAMERA MOUNT

SINGLE SCREEN INSTALLATION IS NOW COMPLETE
INSTALL SCREEN ONTO SCREEN FRAME
3.1
LEVEL SCREEN IF REQUIRED (OPTIONAL)
3.2
Install screen onto column 3
AVS/021/FB1
AV/VC One - Front Box Kit (incl Front Panel)
2 people may be
required to mount
screens
13KG/28.6 LBS
Warnings & product
overview
Warnings & product
overview
If necessary use the
upper adjustment
screws to level screen
Ensure bracket
positions are level.
IMPORTANT NOTE
Ensure that the lower screw is
withdrawn so it does not obstruct
correct seating of mount
SECURE SCREEN TO SCREEN FRAME
3.3
Tighten lower
locking screws
to secure
screen
SCREEN IS NOW INSTALLED
3.4
PLEASE CONSIDER LEAVINg ThESE INSTRUCTIONS wITh ThE UNIT
IF FURThER INSTALLATION MAY bE REqUIRED bY OThERS
IMPORTANT NOTE
Ensure both screws are
fully tightened

FIX 2X SCREEN FRAMES TOGETHER
INSTALL SCREEN FRAMES TO SCREEN SUPPORT BRACKETS
4.1
4.2
Install dual screen frames to column 4
FIX SCREEN FRAMES TO SCREEN SUPPORT BRACKETS
4.3
IMPORTANT NOTE
Ensure both fixing screws
are fully tightened
IMPORTANT NOTE
Ensure all brackets slide
into rectangular cutouts
IMPORTANT NOTE
Ensure all fixings are fully tightened

Mount VESA rails to both screens 5
PLAN MOUNTING POSITION (IF NECESSARY)
FIX VESA RAILS TO THE SCREEN
5.1
5.2
Depending on the VESA size of
your screen, you may need to
consider the mounting position
of the VESA rails. This will
ensure the correct final screen
position.
AV/VC One
SMK instructions
Note orientation of VESA
rails in relation to screen
IMPORTANT NOTE
Carefully select fixing
screws to suit screen
being mounted
TOP
INSTALLING A CAMERA MOUNT?
AVS/021/CAM1
AV/VC One - Camera Mount Kit
2KG/4.4 LBS
If your AV/VC One installation requires
a Camera Mount please install it at this
stage bEFORE mounting the screens
YOU wILL NEED:
AV/VC One - Camera Mount Kit
AVS/021/CAM1
SEE INSTALLATION
INSTRUCTIONS
SUPPLIED wITh
CAMERA MOUNT

Install screens onto column 6
INSTALL BOTH SCREENS ONTO SCREEN FRAME
POSITION SCREENS
LEVEL SCREENS IF NECESSARY
6.1
6.2
6.3
IMPORTANT NOTE
Ensure that the lower
screw is withdrawn so it
does not obstruct correct
seating of mount
Carefully slide screens on
frame to desired position
If necessary use
upper adjustment
screws to level
screens
Ensure bracket
positions are level.
3 OR MORE PEOPLE
MAY bE REqUIRED TO
MOUNT SCREENS
IMPORTANT NOTE
Support stand
until both
screens are
mounted
hEAVY LOAD

DUAL SCREEN INSTALLATION IS NOW COMPLETE
SECURE SCREENS TO SCREEN FRAME
6.4
AV/VC One
SMK instructions
SCREENS ARE NOW INSTALLED
6.5
IMPORTANT NOTE
Ensure ALL FOUR fixing
screws are fully tightened
PLEASE CONSIDER LEAVINg ThESE INSTRUCTIONS wITh ThE UNIT
IF FURThER INSTALLATION MAY bE REqUIRED bY OThERS