Ava PT-HT235P User manual
HDMI transmitter HDMI receiver
Power adapter User manual
PWR STA DC5V
OUTIN
PWR STA DC5V
OUTIN
The HDMI extender provides extension of HDMI signals long distances over a single CAT6
cable, it supports high resolution up to 1080p, EDID copy function. The extender can use for a
wide range of applications requiring long distance transmission of high resolution with high
quality by its good stability and powerful security.
Transmits HDMI video and audio signals up to 50M over a single CAT6 cable;
Support video resolution up to 1920*1080@60Hz, 3D signal;
Support copy EDID, can match many kinds of display device;
Support POC unilateral power supply;
High compatibility, can auto-match source and display device;
Built-in automatic adjustment system, make the image smooth, clear and stable;
Simple to install, plug and play.
Interface
Maximum pixel clock
Power dissipation
Temperature
Humidity
Dimension
The warranty 1 year free warranty
Operating: 5% ~ 90%
Operating: -5℃ ~ +70℃
MAX 3W
Ethernet
Other
HDMI UTP Extender
Impedance 100Ω
Transmission distance
RJ45
CAT6---50M
型号：STK-S7219H
Resolution
HDMI 1.3; HDCP 1.2
6.75Gbps
165MHz
1920X1080@60Hz, 3D
HDMI-A
Power supply
81*43*23mm
The power adapter: DC 5-12V
Compliance with HDMI 1.3 and HDCP 1.2 standard;
PT-HT235P
PT-HT235P
Model：PT-HT235P
RJ45 network interface
EDID
DC 5V
EDID Copy button, Press 3 seconds, copy EDID
from HDMI IN display device to system .If HDMI
IN interface no display connect, restore default
EDID.
Power adapter socket
HDMI signal input/output
Transmitter: Receiver:
UTP
LED indicator
PWR
Description
System power indicator
HDMI IN/HDMI OUT
STA HDMI signal indicator
Diagram
AI secured ltd
United Kingdom
Registration number: 05374981
:
Installation
Connect an HDMI cable between the HDMI input port of transmitter and the HDMI output
port of the video source,
Please keep the user manual in a place where safety and easy to find so that you can read it
immediately when meet problems.
safety instruction:
Connect the HDMI output port of receiver to the display device with HDMI cable,
Connect the transmitter UTP port to the receiver UTP port using a single CAT6 cable,
EDID buttons purposes, such as connection after launch the PWR, STA indicator light,
long PWR at the receiving end, the STA indicator light, long display no image or color,
the transmitter power on the monitor of the HDMI port and transmitter HDMI port
connection, long press EDID until the STA lights flashing, flashing stop and restart the
power, 1-5 steps can be repeated.
1.
2.
3.
4.
5.
Connect the provided DC 5V power supplies to the power socket of the transmitter or the
receiver,
