AVteq NEAT-BRK User manual

Install Guide
Neat Bar Mount (NEAT-BRK)

Included with Neat Bar Mount (NEAT-BRK):
Neat Bar Mount installaon requires an Avteq display mount (UM-1 or UM-2 included with Avteq carts, stands, and
credenzas) and the Neat Bar Wall Mount/Mount Adapter (included with Neat Bar camera). Please refer to the Neat Bar
Camera’s user manual for more informaon.
PACKAGE CONTENTS
A B C D
A. [x1] Neat Bar Bracket (NEAT-BRK)
B. [x1] Camera Spine (FS-24, FS-32, or FS-42)
C. [x1] 1/4-20 Screw
D. [x4] M4x0.7 Screw
avteqinc.com | 2
x1
x1
x1
x4

STEP 1
STEP 2
• Remove the screws of the locking tab on the camera spine (B) and center the camera spine
vercally on the Avteq display mount.
• Fix posion of camera spine using the top hooks on both sides. Aer posioning, screw in the
locking tab. It should be adjusted so that the boom of the camera spine cannot separate from the
boom of the display mount.
• Refer to Neat Bar Camera’s user manual for instrucons on how to assemble the wall mount
included with the Neat Bar camera.
• To Posion Camera Above Display:
Aach Neat provided wall mount to the
top front of Avteq’s Neat Bar Bracket
(A). Slide Avteq’s bracket mount so that
the top 4 thread holes line up with the
4 beveled holes in the Neat wall mount.
Use M4 screws (D) [x4] provided to secure
the Neat wall mount to the Neat Bar
Bracket.
Aach camera spine
Install Neat Bar wall mount to bracket (NEAT-BRK)
avteqinc.com | 3
(Locking Tab)
Above Display:
Neat Wall Mount included
with Neat Bar Camera

STEP 3
Below Display:
• Slide Neat Bar camera to the wall mount for it to hook and aach to the base of the camera.
Aach Neat Bar camera to Neat Bar wall mount
avteqinc.com | 4
• To Posion Camera Below Display:
Aach Neat provided wall mount to the
boom front of Avteq’s Neat Bar Bracket
(A). Slide Avteq’s bracket mount so that
the boom 4 thread holes line up with
the 4 beveled holes in the Neat wall
mount. Use M4 screws (D) [x4] provided
to secure the Neat wall mount to the
Neat Bar Bracket.
Neat Wall Mount included
with Neat Bar Camera

*TIP:
Have a queson?
• When hanging the mount bracket (NEAT-BRK), consider the height of the display to ensure the
mount bracket is peaking out either above or below the display.
Contact us at [e-mail]
STEP 4
• Hang the Neat Bar Bracket on the camera spine at the desired height with its hooks to mount the
camera either above or below the display.
• Lock in posion using a 1/4-20 screw (C) [x1]. Insert in open hole from behind the mount.
Secure bracket (NEAT-BRK)
avteqinc.com | 5
(Rear View)
Insert 1/4-20 screw here
or an open hole below,
depending on the height of
the display