Westinghouse MT50 TILT User manual

ISSUED: 04-14-04 SHEET #: 095-9190-11 of 6
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
IMPORTANT! Read entire instruction sheet
before you start installation and assembly.
PART # QTY. DESCRIPTION
A095-4115 1 wall bracket
B095-4116 1 tilt bracket
C520-9406 4 M5 x 6 mm phillips screw
D520-2005 4 M5 x 10 mm phillips screw
E095-4120 1 adapter bracket
F590-0097 2 concrete anchor
G500-2011 2 #14 x 2" wood screw
H540-2010 2 serrated washer
I520-2027 6 M4 x 10 mm phillips screw
J504-2013 4 M4 x 12 mm phillips screw
Installation andAssembly - Tilting wall
mount for 20" to 39" LCD screens with
VESA®100 or 200 mounting patterns Model: MT50 TILT
A
B
C
Parts List
D
F
R
IJ
E
MAXLOADCAPACITY:50lb
GH

ISSUED: 04-14-04 SHEET #: 095-9190-12 of 6
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
For Wood Stud Walls use a stud finder to locate center
of stud. Drill two 1/8" (3 mm) dia. wood screw guide
holes to a minimum depth of 1.5" (64 mm). Attach wall
bracket (A) to center of wood stud using two screws (G).
A
G
WOOD
STUD
WALL
For All Installation Types insert and
tighten two screws (D) into wall bracket (A).
AD
• Tighten wood screws so that wall plate is firmly
attached,butdonotovertighten.Overtightening can
damagethescrews,greatlyreducingtheirholding
power.
• Never tighten in excess of 80 in • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the stud. The use of an "edge to edge" stud
finderishighlyrecommended.
WARNING

ISSUED: 04-14-04 SHEET #: 095-9190-13 of 6
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
For Concrete Walls drill one 1/4" (6 mm) dia. hole to a
minimum depth of 1.5" (64 mm). Insert anchor (F) in hole
flush with wall as shown (right). Place wall bracket (A) over
anchor (F) and secure with #10 x 1.5" wood screw (G). Make
sure wall bracket is level, mark other hole and repeat steps
with other fasteners. Tighten all fasteners.
CUTAWAYVIEW
concrete
wall
3A
F
Drill hole and insert anchor
Place wall bracket over anchor and secure with screw
After repeating step one tighten all fasteners
F
wall bracket
A
G
F
3B
3C
•When installing wall mounts on cinder block, verify that
you have a minimum of 1 5/8" of actual concrete surface
in the 1/4" diameter hole to be used for the concrete
anchors. It is suggested that a standard electric drill on
slow setting is used to drill the hole instead of a hammer
drill to avoid breaking out the back of the hole when
entering a void or cavity. Do not drill into mortar joints,
which are brittle and will not provide a stable anchorage!
WARNING
• Tighten wood screws firmly, but do not overtighten.
Overtightening can damage the wood screw, greatly
reducing its holding power.
• Never tighten in excess of 80 in • lb (9 N.M.).
WARNING
• Neveruseconcreteexpansionanchorsforattachment
of wall plate to concrete walls covered with a layer of
plaster, drywall, or other finishing material.
WARNING

ISSUED: 04-14-04 SHEET #: 095-9190-14 of 6
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
I
J
VESA 100
MOUNTING
PATTERN
FORVESA100MOUNTINGPATTERN -
Use four M4 phillips screws (J) to attach adapter plate
(E) to screen. Use four center holes of plate as shown
below.
SCREEN
100 x 200
MOUNTING
PATTERN
FORVESA100 X200MOUNTING PATTERN -
Use six M4 phillips screws (I) to attach adapter plate (E)
to screen. Use six slots on plate as shown below. Align
upper end of slots with screen mounting holes. SCREEN
E
E

ISSUED: 04-14-04 SHEET #: 095-9190-15 of 6
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
Hook tilt bracket (B) onto wall bracket (A). Adjust tilt
(15° forward and 5° back) and secure with two
serrated washers (H) and two M5 screws (D).
BA
SCREEN
Attach tilt bracket (B) to adapter
bracket using four M5 screws (C).
BOTTOMOFSCREEN
SCREEN
C
ADAPTER
BRACKET
H
A
B
Note: Make sure washer (H)
is facing bevelled edge
towards 10 mm screw (D).
D
B
• The screen and bracket may be too heavy and bulky for
one person to handle safely. Two or more persons, or
mechanical lifting equipment, should always be used to
securely attach the screen to the wall bracket. Refer to
your screen’s owner’s manual for additional installation
instructions.
WARNING
Note: Refer to your TV owner’s manual for additional instructions which may pertain to the positioning of your
specific TV.

ISSUED: 04-14-04 SHEET #: 095-9190-16 of 6
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
Limited Five-Year Warranty
Westinghouse Digital Electronics warrants to original end-users of this Westinghouse television mounting product (the
“Product”)thattheProductwillbefreefromdefectsinmaterialandworkmanship,undernormaluse,foraperiodoffive(5)
years from the date of purchase by the original end-user, subject to the following terms and conditions:
REPAIR OR REPLACEMENT – For a period of five (5) years from the original date of purchase, Westinghouse Digital
Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product.
Replacement parts and products will be warranted for either the remainder of the original warranty period or ninety (90)
daysfrom the date ofdelivery to the end-user, whichever occurs last.
OBTAINING WARRANTY SERVICE –Toobtainwarrantyservices,youmusteitherpersonallydeliverorshiptheProduct
to Westinghouse Digital Electronics, freight prepaid. Please call Westinghouse Digital Electronics at [phone] to
obtaina Return MerchandiseAuthorization (“RMA”) andforotherinstructionsregardingreturnand replacement or repairof
the Product. Westinghouse Digital Electronics will not accept Products delivered to it without an RMA.
EXCLUSIONS TO WARRANTY –Thiswarranty does not cover damage caused by(a)serviceorrepairsbyanyoneother
thanpersonnelauthorizedbyWestinghouseDigitalElectronics, (b) the failure to utilize proper packing when returning the
product, (c) improper installation or the failure to follow Product instructions or warnings, or (d) misuse or accident, in
transitor otherwise.
PROOF OR ORIGINAL PURCHASE –Asales receipt, invoice, or other proof of purchase specifying the original date of
purchasewithin the five (5) yearwarranty period must be presented to obtain warranty service. This warranty extends to
theoriginal purchaser and is nottransferable.
EITHER REPAIR OR REPLACEMENT ISYOUR EXCLUSIVE REMEDY UNDERTHIS WARRANTY. EXCEPT TO THE
EXTENT PROHIBITED BY LAW, WESTINGHOUSE DIGITAL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIALDAMAGESCLAIMEDTOARISE FROM BREACHOFANYEXPRESSORIMPLIEDWARRANTYON
THISPRODUCT. ANYIMPLIEDWARRANTY OF MERCHANTABILITYORFITNESSFORAPARTICULARPURPOSE
ONTHIS PRODUCTISLIMITEDINDURATIONANDSCOPETOTHETERMSOFTHIS WARRANTY.
Some States do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how
longan implied warranty lasts, so the abovelimitation may not apply to you. Thiswarranty gives specific legal rights, and
you may also have other rights which vary from State to State.
WestinghouseDigital Electronics, LLC
16257East GaleAve.
City of Industry, California 91745
Tel:[phone].
andWestinghousearetrademarksofWestinghouseElectricCorporationandareusedunderlicense.