AVYCON AVC LHN51SVT-A1S User manual

AVC
LHN51SVT-A1S
5MP AUTO-TRACKING PTZ BULLET CAMERA
QUICK START GUIDE

Package Contents.....................................................................................................................
Caution......................................................................................................................................
System Requirements...............................................................................................................
Hardware Overview...................................................................................................................
- 12x Mini (PoE) PTZ Bullet Network Camera..........................................................................
- Camera Installation..................................................................................................................
How to perform a Hardware Reset...........................................................................................
How to Connect to Alarm Interface.........................................................................................
How to Connect the Waterproof Connector..........................................................................
Accessing the Network Camera...............................................................................................
TABLE OF CONTENT
1
1
1
2
2
3
6
6
7
8

Thank you for purchasing this AVYCON IP Network Camera. This guide provides basic instructions
on installing and accessing this IP Network Camera. For more details, please refer to the User
Manual.
Package Contents
Before installation, please verify that all the necessary items are supplied in the box as the
package contents listed below. If any item is missing or damaged, please contact the shipper
and your Avycon Sales Representative.
ITEMS
DEFAULT
OPTIONAL
QUANTITY DESCRIPTION
Avycon Network Camera 1 Pc The purchased model
Power Adapter
Quick Start Guide
Warranty Card
Lens
Bracket & Screw Pack
1 Pc
1 Pc
1 Pc
DC 12V (Optional for part of devices)
Printed material
Printed material
If purchased
If purchased
Caution
* Do not expose the product to rain moisture
* Make sure the device is firmly fixed when mounting it on the wall or ceiling
* Make sure that the power supply voltage is correct before using ther camera
* Do not use a 3rd party Power Adapter
* Never attempt to disassemble or modify the camera
System Requirements
OPERATING SYSTEM: Windows XP / Vista / 7 / 8 /10 / Server 2000 / Server 2008
CPU: 1.66 Ghz or Higher
RAM: 1G or Higher
Graphic Memory: 128MB or more
Internet Protocol: TCP / IP (IPv4 / IPv6)
1 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S

PEDESTAL MOUNTED
2 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
microSD / SDHC / SDXC Card Slot
Screw-In Vent
Reset
DC 12V Alarm In / Out
Ethernet Port
WALL MOUNTED
MINI PTZ BULLET
Light Sensor
IR LED’s
White Light LED’s
Lens
MINI PoE PTZ BULLET
Hardware Overview
AVC-LHN51SVT-A1S
NOTE: Only DC 12V is available for Mini PTZ Bullet Power Supply. DC 12V & PoE (802.3at) are
available for Mini PoE PTZ Bullet Power Supply.
microSD / SDHC / SDXC Card Slot
Screw-In Vent
Reset
DC 12V Alarm In / Out
Ethernet Port
Audio
In / Out

3 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
Camera Installation - Install with Junction Box
AVC-LHN51SVT-A1S
2. Unbolt the screws on the Junction Box (AVM-LDMT-W-A1*) between the front cover /
rear cover and remove the front cover. Remove the tension disc on the rear cover, and cut
an opening on the rubber plug and get cables through the opening then fasten the rear
cover to the ceiling or the wall.
1. Position the mounting template sticker in the position where the camera is intended to
be installed;
DIAGRAM 1: Optional “AVM-LDMT-W-A1” junction box
MOUNTING
HOLE
MOUNTING
HOLE
MOUNTING
HOLE
MOUNTING
HOLE
MOUNTING
HOLE
MOUNTING
HOLE
DIAGRAM 1
MOUNTING
HOLE
MOUNTING
HOLE

3. Secure the camera to the junction box's front cover by using 4 Torx screws and then reinstall
the junction box front cover by place at an angle near 90° to the junction box base
(see diagram below).
4 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
Tension Disc
Rubber Plug
Rubber Plug Network Cable
Power Cable
4. Adjust the cable’s lengths, connect the cables to corresponding ports/interfaces and secure
the tension disc. Close the junction box and tighten screws as the last step. Please remember
to plug the small rubber plug whenever the holes on the rubber plug are not in use.
DIAGRAM 2: Remember to fix the setscrew tightly
DIAGRAM 2

5 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
Camera Installation - Install to Wall Directly
AVC-LHN51SVT-A1S
NOTE: NOTE: If you need to use the SD card, please remove the thumbscrew holding the
sun cover and remove cover. Loosen screws on SD card cover to get access to the SD card
slot. After inserting SD card, reattach SD card cover, tighten screws and then replace sun
cover and make sure to tighten thumbscrew.
1. For use without the optional junction box (AVM-LDMT-W-A1), after making hole for passing
cables through, mark mounting holes and secure camera to wall with proper hardware.

1. While power is off, press and hold reset button, then power on the camera and the IR LEDs
will begin to flash.
2. There are 2 hardware models of our camera. Please follow instructions for the proper
models below:
Model - A: Keep holding button until the LEDs stop flashing;
Model - B: Keep holding button until the IR LEDs stay on;
3. Release the reset button and the camera will begin the reset process, which should take 1-3
minutes to complete. After the reset process is complete, the camera will have an IP address
of 192.168.10.201. If you find that the IP address has not changed, please repeat process
from Step 1.
4. If needed, modify the IP address of the camera using the Tools utility.
6 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
How to perform a Hardware Reset
PIN1: Alarm Output NC / NO 24V DC 1A
PIN2: Alarm Output NC / NO 24V DC 1A
PIN3: Alarm Input NC / NO ≤12V
PIN4: Alarm Input NC / NO ≤12V
How to Connect to a Alarm Interface
Digital InputDigital Output
General I/O
Terminal Block
PIN2 PIN3 PIN4PIN1

1. Insert network cable through the screw nut, rubber ring and the screw bolt.
2. Insert the rubber ring into the screw bolt;
3. Connect the screw nut to the screw bolt;
4. Place the O-Ring on the network port connector;
5. Connect the RJ45 to the network port connector, tighten the screw bolt and the connector.
NOTE: If placed in an extremely wet environment, for added protection you can wrap the
connector in electrical tape to prevent standing water to accumulate on connector.
7 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
How to Connect the Waterproof Connector
Network Port Connector LAN
Screw Bolt
Rubber Ring
Screw Nut
O-Ring

8 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
Accessing the Network Camera
The Tools utility is a software tool which can automatically detect AVYCON IP cameras on your
LAN, modify IP addresses, and manage firmware upgrades. It’s recommended to use when
assigning IP addresses for multiple cameras.
1. Install the Tools utility (This can be downloaded from our website)
2. Start Tools, then click the IPC Tools icon, and then all AVYCON IP cameras on the local
network you are connected to will be shown with information such as IP address,
MAC address, Status, Port number, Netmask, and Gateway.
Assigning an IP Address by Using Tools Utility
In order to access the camera on your network, you must assign it an IP address compatible
with your network configuration. The default address of this camera is 192.168.10.201. You
can either change the IP address of a camera using the Tools Utility or manually assign your
computer an address to communicate with the camera and log in using the browser to modify
the IP address.
Assigning an IP Address
In order to access the camera on your network, you must assign it an IP address compatible
with your network configuration.

4. If the selected camera shows "Active" in the status bar, you can directly type the User Name
and Password you have previously assigned and then make any modifications to the IP address
and click on Modify.
3. Select a camera or multiple cameras according to the MAC addresses; the camera must
be assigned an IP address to be accessible.
9 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
SELECT SINGLE CAMERA
SELECT MULTIPLE CAMERAS

5. After activation, you can change the IP address or other network values, and then click
“Modify” button to change the IP address successfully;
If the selected camera shows "Inactive" in the status bar (Camera with version V4x.7.0.69 or
above), click to set the password when using it for the first time. You can also set
the security questions when activating the camera in case that you forget the password (You
can reset the password by answering three security questions correctly). Click ‘Save’ and it will
show that the activation was successful.
NOTE: (1) Password must be 8 to 32 characters long, contain at least one number and one letter.
(2) You need to be using Tools version V2.4.0.1 or above to activate the camera.
10 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
(1)
(2)
(4)
(3)

6. By double clicking on the selected camera's row or the browser icon of the camera, you
can access the camera via a web browser directly with the browser window that will pop up.
If the network segment of the computer and that of the camera are different, please
follow the steps to change the IP address:
1. Change the IP address of computer to 192.168.10.0 segment, here are two ways as below:
A. Start > Control Panel > Network and Internet Connection > Network Connection >
Local Area Connection, and double click it.
11 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
Assigning an IP Address via Browser

B. Click “Advanced”, and then click “IP settings” > “IP address” > “Add”. In the pop-up
window, enter an IP address that is in the same segment with your Avycon IP camera
(e.g. 192.168.10.200, but please confirm that the IP address you pick does not conflict with
another address on the network);
2. Start your web browser. In the address bar, enter the default IP address of the camera:
http://192.168.10.201;
12 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S

If this is the first time you are logging into the camera, you need to set a password first.
If wanted, you can also set three security questions for your device after activation. You can
now use this password to log into the camera.
13 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
NOTE: 1. Password must be 8 to 32 characters long, contain at least one number and one letter.
2. You can click the “forget password” in login page to reset the password by answering three
security questions when you forget the password, if you set the security questions in advance.
4. After login, please select “Configuration” > “Basic Settings” > “Network” > “TCP/IP”.
The Network Settings page appears (Shown as below Figure);

5. Change the IP address or other network values as need, then click on the “Save” button;
6. You should now have completed changing the default IP address.
14 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
The camera can be used with the most standard operating systems and browsers.
The recommended browsers are Internet Explorer, Firefox, Chrome, Safari.
Accessing from the Web Browser
Before using the browser to get access to your camera, you may need to install the
MsActiveX plugin first. Please refer to the steps below:
1. Launch Internet Explorer and enter the IP address of the camera: e.g. 192.168.10.201
2. If this is the first time accessing the camera, you will be prompted to create a password,
and also the option to set three security questions for your device after activation. After
assigning the new password, you can now log into camera with these new credentials.
NOTE: 1. Password must be 8 to 32 characters long, contain at least one number and one letter.
2. You can click on "Forget Password" on the login page to reset your password by answering
the three security questions you assigned during activation.
3. If this is the first time logging into your IP camera, the browser will prompt you to install the
plugin. Please click on link that the window displays to start the download.
Accessing over IE Browser

4. Follow the prompts to install the plugin and when finished, you will see the window below
After the plugin has successfully installed, you can refresh the browser and you should be
able to see video.
If IE9 or higher version browser is used, it is suggested that the Avycon camera web link should
be added as a trusted site. See the instructions as follows:
1. Start the IE9 or higher version browser, and select “Tools” > “Internet Options”;
2. Select Security, then click on "Trusted Sites"

3. Enter the IP address of the camera in the blank and click “Add”;
16 5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
4. Enter the IP address into your browser's address bar. After logging into your AVYCON IP
camera successfully, you should see live video.

phone: [phone]
email: [email protected]
social: @avycon_aivo
website: avycon.com
Copyright © AVYCON. All rights reserved. Specifications and pricing are subject to change without notice.