Axel TIGER E5 User manual

USER MANUAL-PRELIMINARY
axeltechnology.com
TIGER E5
(Rev. 1.0)

2
SAFETY WARNINGS/ISTRUZIONI PER LA SICUREZZA |FOREWORD
TIGER E5 · User Manual · ENG
SUMMARY
1. SAFETY WARNINGS/ISTRUZIONI PER LA SICUREZZA 4
FOREWORD 5
2. SAFETY WARNINGS 6
3. CONSIGNES DE SÉCURITÉ IMPORTANTES 8
4. ISTRUZIONI IMPORTANTI PER LA SICUREZZA 10
5. WICHTIGE SICHERHEITSHINWEISE 12
6. INSTRUCCIONES IMPORTANTES DE SEGURIDAD14
7. UNPACKING AND INSPECTION 16
8. FIRST INSTALLATION RECOMMENDATIONS 17
POWER SUPPLY CABLE 17
PROTECTION AGAINST LIGHTNING 18
VENTILATION 19
9. DEVICE INSTALLATION 19
BEST SETUP LOCATION 19
POWER SUPPLY 19
10. DEVICE GENERAL DESCRIPTION 21
FRONT PANEL 21
REAR PANEL 21
11. FIRST DEVICE START 25
STARTING YOUR TIGER E5 - QUICK SETUP 25
11.1.1 HOME PAGE 26
LOGIN 28
LOGGED IN USER –HOME PAGE 29
SUMMARY MASK 30
SETUP 37
11.5.1 GENERAL SETUP 37
11.5.2 NETWORK 41
11.5.3 NTP 47
11.5.4 SNMP 49
11.5.5 SMTP 56
11.5.6 GPIO 60
11.5.7 GPS 64
11.5.8 SYSTEM TOOLS 65
ADMINISTRATION 68
11.6.1 USER CLASS –USER RIGHTS TO LOGIN THE SYSTEM 70
11.6.2 ADDING A NEW USER 74
11.6.3 REMOVING AN EXISTING USER 75
LOGS 75
11.7.1 DEBUG LOGS 76
11.7.2 USERS LOGS 76
11.7.3 EVENTS LOGS 76
11.7.4 NOTIFICATIONS LOGS 76
CONFIGURATION 76
RDS/RBDS 77
11.9.1 QUICK RDS SETUP 77
11.9.2 UECP PORTS 77
11.9.3 BASIC SETTINGS 83
11.9.4 STANDARD MODE 89
11.9.5 EXTENDED MODE 102
11.9.6 RDS BLOCKS ANALYSIS 109
AUDIO INPUT 110
11.10.1 SOURCES 110

3
SAFETY WARNINGS/ISTRUZIONI PER LA SICUREZZA |FOREWORD
TIGER E5 · User Manual · ENG
11.10.2 CHANGEOVER 121
11.10.3 AUDIO ANALYSIS 123
TIGER E5 WAYS OF USE 126
11.11.1 SINGLE AUDIO SOURCE WITH RDS GENERATION127
11.11.2 DOUBLE AUDIO SOURCES WITH AUDIO CHANGEOVER
128
11.11.3 MPX REBROADCAST WITH RDS REGENERATION +
UECP FILTER ON INCOMING RDS 129
11.11.4 DOUBLE AUDIO SOURCES WITH AUDIO CHANGEOVER.
MPX CHANGEOVER WITH MPX BACKUP SOURCE 130
11.11.5 DOUBLE AUDIO SOURCES WITH AUDIO CHANGEOVER.
MPX CHANGEOVER WITH MPX MAIN SOURCE 131
11.11.6 RDS GENERATOR CONFIGURATION 132
MPX 132
11.12.1 INTERNAL MPX ENCODER 132
11.12.2 CHANGEOVER 133
11.12.3 OUTPUTS 147
11.12.4 MPX ANALYSIS 148
MULTIMEDIA 150
11.13.1 STREAMER 150
12. WEEE DIRECTIVE –INFORMATIVA RAEE 160
13. WARRANTY 161
14. DECLARATION OF ROHS CONFORMITY 162
15. FINAL CONSIDERATIONS AND AXEL TECHNOLOGY
CONTACTS 163

4
SAFETY WARNINGS/ISTRUZIONI PER LA SICUREZZA |FOREWORD
TIGER E5 · User Manual · ENG
1. SAFETY WARNINGS/ISTRUZIONI PER LA SICUREZZA
_____________________________________________________________________________________________________________________
SAFETY WARNINGS
CONSIGNES DE SÉCURITÉ IMPORTANTES
ISTRUZIONI IMPORTANTI PER LA SICUREZZA
WICHTIGE SICHERHEITSHINWEISE
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
(Rel. 1.6)
_____________________________________________________________________________________________________________________

5
SAFETY WARNINGS/ISTRUZIONI PER LA SICUREZZA |FOREWORD
TIGER E5 · User Manual · ENG
FOREWORD
_____________________________________________________________________________________________________________________
For your own safety and to avoid invalidation of the warranty all text marked with these Warning Symbols should be read carefully.
_____________________________________________________________________________________________________________________
Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor.
The manufacturer shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual, or through any mis-operation or
fault in hardware contained in the product.
It is recommended that all maintenance and service on the product should be carried out by the manufacturer or its authorised agents. The manufacturer cannot accept any
liability whatsoever for any loss or damage caused by service, maintenance or repair by unauthorisedpersonnel

6
SAFETY WARNINGS |FOREWORD
TIGER E5 · User Manual · ENG
2. SAFETY WARNINGS
The installation and servicing instructions in this manual are for use by qualified personnel only.
-
Read All Instructions. All safety and operating instructions must be read before operating the product. They also must be retained for future reference, as it contains
a number of useful hints for determining the best combination of equipment settings for Yr particularapplication.
-
Heed All Warnings. All warnings on the product and those listed in the operating instructions must be adhered to.
-
Heat. This product must be situated away from any heat sources such as radiators or other products (including power amplifiers or transmitters) that produce
heat.
-
Power Sources. This product must be operated from the type of power source indicated on the marking label and in the installation instructions. If you are not sure of
the type of power supplied to your facility, consult your local power company. Make sure the AC main voltagecorresponds to that indicated in the technicalspecifications.
If a different voltage (ex. 110/115 VAC) is available, open the equipment closure and set the voltage switch on the main supply circuit, located behind the AC socket
-
Power Cord Protection. Power supply cords must be routed so that they are not likely to be walked on nor pinched by items placed upon or against them. Pay
particular attention to the cords at AC wall plugs and convenience receptacles, and at the point where the cord plugs into theproduct
-
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
-
Lightning. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the AC wall
outlet and the audio connections. This will prevent damage to the product due to lightning and power line surges
-
Installation. Configuration and installation should only be carried out by a competent installation engineer
-
Cabling. Using high quality wires, well protected. Make sure the cableintegrity.

7
SAFETY WARNINGS |FOREWORD
TIGER E5 · User Manual · ENG
This symbol alerts you to the presence of dangerous voltage inside the closure –voltage which may be sufficient to
constitute a risk of shock. Do not perform any servicing other than that contained in the operating instructions. Refer
all servicing to qualifiedpersonnel
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Do not change the voltage setting or replace the mains fuse without first turning the unit off and unplugging the
mains cord
Make sure the AC main voltage corresponds to that indicated in the technical specifications. THIS APPARATUS MUST BE
EARTHED !
To avoid risk of fire use the correct value fuse, as indicated on the label stuck on the right side of the unit.
This apparatus uses a single pole mains switch and does therefore not separate the unit completely from the
mains power. To completely separate from mains power (f.i. in the event of danger) unplug mains power cord. As the
MAINS plug is the disconnect device, the disconnect device shall remain readily operable.

8
CONSIGNES DE SÉCURITÉ IMPORTANTES |FOREWORD
TIGER E5 · User Manual · ENG
3. CONSIGNES DE SÉCURITÉ IMPORTANTES
-
Lire ces consignes
-
Conserver ces consignes
-
Observer tous les avertissements
-
Suivre toutes les consignes
-
Ne pas utiliser cet appareil à proximité del’eau
-
Ne pas obstruer les ouvertures de ventilation. Installer en respectant les consignes dufabricant
-
Ne pas installer à proximité d'une source de chaleur telle qu'un radiateur, une bouche de chaleur, un poêle ou d'autres appareils (dont les amplificateurs)
produisant de lachaleur.
-
Ne pas annuler la sécurité de la fiche de terre, la troisième branche est destinée à la sécurité. Si la fiche fournie ne s'adapte pas à la prise électrique,
demander à un électricien de remplacer la prise hors normes.
-
Protéger le cordon d'alimentation afin que personne ne marche dessus et que rien ne le pince, en particulier aux fiches, aux prises de courant et au point de
sortie del’appareil
-
Utiliser uniquement les accessoires spécifiés par lefabricant
-
Utiliser uniquement avec un chariot, un support ou une table spécifié par le fabricant ou vendu avec l’appareil. Si un chariot est utilisé, déplacer l’ensemble
chariot–appareil avec précaution afin de ne pas le renverser, ce qui pourrait entraîner des blessures
-
Débrancher l’appareil pendant les orages ou quand il ne sera pas utilisé pendant longtemps.
-
Confier toute réparation à du personnel qualifié. Des réparations sont nécessaires si l’appareil est endommagé d’une façon quelconque, par exemple: cordon
ou prise d’alimentation endommagé, liquide renversé ou objet tombéà l’intérieur de l’appareil, exposition de l’appareil à la pluie ou à l’humidité, appareil qui ne marche
pas normalement ou que l’on a fait tomber.
-
NE PAS exposer cet appareil aux égouttures et aux éclaboussements. Ne pas poser des objets contenant de l'eau, comme des vases, sur l'appareil

9
CONSIGNES DE SÉCURITÉ IMPORTANTES |FOREWORD
TIGER E5 · User Manual · ENG
Ce symbole indique la présence d'une tension dangereuse dans l'appareil constituant un risque de choc électrique.
Ce symbole indique que la documentation fournie avec l'appareil contient des instructions d'utilisation et d'entretien
importantes.
Avant de modifier le commutateur de changement de tension ou replacer le fusible il faut débrancher l’appareil de la
prise électrique. Pendant son usage, l’appareil doit etre branchee à la prise de terre
Utiliser le fusible principal AC avec le valeur qui est indiquée sur l'étiquette collée sur le coffret
Assurez-vous que la tension principale AC correspond à celle indiquée dans les spécifications techniques.
L’interrupteur d’alimentation interrompt un pôle du réseau d’alimentation excepté le conducteur de terre de
protection. En cas de danger, debrancher le cordon d'alimentation. Parce que la prise du réseau de alimentation est
utilisée comme dispositif de déconnexion, ce dispositif doit demeuré aisément accessible

10
ISTRUZIONI IMPORTANTI PER LA SICUREZZA |FOREWORD
TIGER E5 · User Manual · ENG
4. ISTRUZIONI IMPORTANTI PER LA SICUREZZA
-
Leggere le presenti istruzioni
-
Conservare queste istruzioni
-
Osservare tutte le avvertenze
-
Seguire scrupolosamente tutte le istruzioni
-
Non usare questo apparecchio in prossimità diacqua
-
Non ostruire alcuna apertura per il raffreddamento. Installare l’apparecchio seguendo leistruzioni
-
Non installare l'apparecchio accanto a fonti di calore quali radiatori, aperture per l'afflusso di aria calda, forni o altri apparecchi (amplificatori inclusi) che generino
calore
-
Non rimuovere il terminale di connessione a terra sul cordone di alimentazione: esso ha lo scopo di tutelare l’incolumità dell’utilizzatore. Se la spina in dotazione
non si adatta alla presa di corrente, rivolgersi ad un elettricista per far eseguire le modifichenecessarie.
-
Evitare di calpestare il cavo di alimentazione o di comprimerlo, specialmente in corrispondenza della spina e del punto di inserzione sull’apparato.
-
Utilizzare solo dispositivi di collegamento e gli accessori specificati dalproduttore.
-
Utilizzare l’apparecchio solo con un carrello, un sostegno, una staffa o un tavolo di tipo specificato dal produttore o venduto insieme all’apparecchio. Se si utilizza un
carrello, fare attenzione negli spostamenti per evitare infortuni causati da ribaltamenti del carrellostesso.
-
Scollegare l’apparecchio dalla presa di corrente durante i temporali oquando inutilizzato a lungo
-
Per qualsiasi intervento, rivolgersi a personale di assistenza qualificato. È’ necessario intervenire sull’apparecchio ogniqualvolta si verificano danneggiamenti di qualsiasi
natura. Ad esempio, la spina o il cavo di alimentazione sono danneggiati, è entrato liquido nell’apparecchio o sono caduti oggetti su di esso, l’apparecchio è stato
esposto alla pioggia o all’umidità, non funziona normalmente o ècaduto.
-
Non esporre a sgocciolamenti o spruzzi. Non appoggiare sull'apparecchio oggetti pieni di liquidi, ad esempio vasi da fiori.

11
ISTRUZIONI IMPORTANTI PER LA SICUREZZA |FOREWORD
TIGER E5 · User Manual · ENG
Questo simbolo indica la presenza di alta tensione all'interno dell'apparecchio, che comporta rischi di scossa elettrica.
Questo simbolo indica la presenza di istruzioni importanti per l'uso e la manutenzione nella documentazione in
dotazione all'apparecchio.
Non sostituire il fusibile o cambiare la tensione di alimentazione senza aver prima scollegato il cordone di
alimentazione. L’APPARATO DEVE ESSERE CONNESSO A TERRA.
Sostituire il fusibile generale con uno di identico valore, come indicato sulla etichetta applicata sul mobile
dell’apparato
Assicurarsi che la tensione di rete corrisponda a quella per la quale è configurato l’apparecchio
Questo apparato utilizza un interruttore di alimentazione di tipo unipolare e l’isolamento dalla rete elettrica non è pertanto completo. Per ottenere
un isolamento totale (ad esempio in caso di pericolo), scollegare il cordone di alimentazione. Inoltre, poichè la spina di alimentazione è
utilizzata come dispositivo di sezionamento, essa deve restare facilmenteraggiungibile

12
WICHTIGE SICHERHEITSHINWEISE |FOREWORD
TIGER E5 · User Manual · ENG
5. WICHTIGE SICHERHEITSHINWEISE
-
Diese Hinweise LESEN
-
Diese Hinweise AUFHEBEN
-
Alle Warnhinweise BEACHTEN
-
Alle Anweisungen BEFOLGEN
-
Dieses Gerät NICHT in der Nähe von Wasser verwenden
-
KEINE Lüftungsöffnungen verdecken. Gemäß den Anweisungen des Herstellerseinbauen
-
Nicht in der Nähe von Wärmequellen, wie Heizkörpern, Raumheizungen, Herden oder anderen Geräten (einschließlich Verstärkern) installieren, die Wärme
erzeugen
-
Die Schutzfunktion des Schukosteckers NICHT umgehen. Bei Steckern für die USA gibt es polarisierte Stecker, bei denen ein Leiter breiter als der andere ist; US-
Stecker mit Erdung verfügen über einen dritten Schutzleiter. Bei diesen Steckerausführungen dient der breitere Leiter bzw. der Schutzleiter Ihrer Sicherheit. Wenn der
mitgelieferte Stecker nicht in die Steckdose passt, einen Elektriker mit dem Austauschen der veralteten Steckdose beauftragen
-
VERHINDERN, dass das Netzkabel gequetscht oder darauf getreten wird, insbesondere im Bereich der Stecker, Netzsteckdosen und an der Austrittsstelle vom
Gerät
-
NUR das vom Hersteller angegebene Zubehör und entsprechende Zusatzgeräteverwenden.
-
NUR in Verbindung mit einem vom Hersteller angegebenen oder mit dem Gerät verkauften Transportwagen, Stand, Stativ, Träger oder Tisch verwenden. Wenn ein
Transportwagen verwendet wird, beim Verschieben der Transportwagen-Geräte- Einheit vorsichtig vorgehen, um Verletzungen durchUmkippen
-
Das Netzkabel dieses Geräts während Gewittern oder bei längeren Stillstandszeiten aus der Steckdose ABZIEHEN.
-
Alle Reparatur- und Wartungsarbeiten von qualifiziertem Kundendienstpersonal DURCHFÜHREN LASSEN. Kundendienst ist erforderlich, wenn das Gerät auf
irgendwelche Weise beschädigt wurde, z.B. wenn das Netzkabel oder der Netzstecker beschädigt wurden, wenn Flüssigkeiten in das Gerät verschüttet wurden oder
Fremdkörper hineinfielen, wenn das Gerät Regen oder Feuchtigkeit ausgesetzt war, nicht normal funktioniert oder fallen gelassen wurde.
-
Dieses Gerät vor Tropf- und Spritzwasser SCHÜTZEN. KEINE mit Wasser gefüllten Gegenstände wie zum Beispiel Vasen auf das GerätSTELLEN.

13
WICHTIGE SICHERHEITSHINWEISE |FOREWORD
TIGER E5 · User Manual · ENG
Dieses Symbol zeigt an, dass gefährliche Spannungswerte, die ein Stromschlagrisiko darstellen, innerhalb dieses Geräts
auftreten
Dieses Symbol zeigt an, dass das diesem Gerät beiliegende Handbuch wichtige Betriebs- und Wartungsanweisungen
enthält.
Vor Änderung der Netzspannung oder Sicherungswechsel Netzkabel trennen. Das Gerät muss für den Betrieb geerdet
werden.
Hauptsicherung nur mit einer gleichwertigen austauschen (s. entsprechende Etikette).
Vor Einschalten Netzspannungseinstellung am Gerät überprüfen bzw. anpassen.
Inpoliger Netzschalter. In Notfälle oder fürWartungsarbeiten Netzkabel trennen. Der Netzstecker fungiert auch als Trennelement muss deshalb
zugänglich bleiben

14
INSTRUCCIONES IMPORTANTES DE SEGURIDAD |FOREWORD
TIGER E5 · User Manual · ENG
6. INSTRUCCIONES IMPORTANTES DE SEGURIDAD
-
LEA estas instrucciones
-
CONSERVE estas instrucciones
-
PRESTE ATENCION a todas las advertencias.
-
SIGA todas las instrucciones
-
NO utilice este aparato cerca del agua
-
NO obstruya ninguna de las aberturas de ventilación. Instálese según lo indicado en las instrucciones del fabricante
-
No instale el aparato cerca de fuentes de calor tales como radiadores, registros de calefacción, estufas u otros aparatos (incluyendo amplificadores) que
produzcancalor
-
NO anule la función de seguridad del enchufe polarizado o con clavija de puesta a tierra. Un enchufe polarizado tiene dos patas, una más ancha que la otra. Un
enchufe con puesta a tierra tiene dos patas y una tercera clavija con puesta a tierra. La pata más ancha o la tercera clavija se proporciona para su seguridad. Si el toma
corriente no es del tipo apropiado para el enchufe, consulte a un electricista para que sustituya el toma corriente de estilo anticuado
-
PROTEJA el cable eléctrico para evitar que personas lo pisen o estrujen, particularmente en sus enchufes, en los toma corrientes y en el punto en el cual sale del
aparato
-
UTILICE únicamente los accesorios especificados por elfabricante
-
UTILICESE únicamente con un carro, pedestal, escuadra o mesa del tipo especificado por el fabricante o vendido con el aparato. Si se usa un carro, el mismo debe
moverse con sumo cuidado para evitar que se vuelque con el aparato
-
DESENCHUFE el aparato durante las tormentas eléctricas, o si no va a ser utilizado por un lapso prolongado.
-
TODA reparación debe ser llevada a cabo por técnicos calificados. El aparato requiere reparación si ha sufrido cualquier tipo de daño, incluyendo los daños al
cordón o enchufe eléctrico, si se derrama líquido sobre el aparato o si caen objetos en su interior, si ha sido expuesto a la lluvia o la humedad, si no funciona de modo
normal, o si se ha caído.
-
NO exponga este aparato a chorros o salpicaduras de líquidos. NO coloque objetos llenos con líquido, tales como floreros, sobre el aparato .

15
INSTRUCCIONES IMPORTANTES DE SEGURIDAD |FOREWORD
TIGER E5 · User Manual · ENG
Este símbolo indica que la unidad contiene niveles de voltaje peligrosos que representan un riesgo de choques
eléctricos.
Este símbolo indica que la literatura que acompaña a esta unidad contiene instrucciones importantes de
funcionamiento y mantenimiento.
Antes de cambiar la alimentacion de voltaje o de cambiar el fusible, desconecte el cable de alimentacion. Para
reducir el riesgo de descargas electricas, esta unidad debe ser conectada a tierra.
Remplaze el fusible con lo mismo, que corresponde a lo indicado en el panel del equipo.
Antes de encender, controlar que la linea de alimentacion de voltaje corresponda a la indicada
El interruptor de alimentación es unipolar. En el caso de peligro, desconecte el cable de alimentación. Porque la clavija de conexion a red sirve
por la desconection de la unidad, la clavija debe ser ubicada en proximidad de la unidad

16
UNPACKING AND INSPECTION |FOREWORD
TIGER E5 · User Manual · ENG
7. UNPACKING AND INSPECTION
Your equipment was packed carefully at the factory in a container designed to protect the unit during shipment. Nevertheless, we recommend making a careful inspection of the
shipping carton and the contents for any signs of physical damage.
Damage & Claims
If damage is evident, do not discard the container or packing material. Contact your carrier immediately to file a claim for damages. Customarily, the carrier requires you, the consignee,
to make all damage claims. It will be helpful to retain the shipping documents and the waybillnumber.
Save all packing materials! If You should ever have to ship the unti (e.g. for servicing), it is best to ship it in the original carton with its packing materials because both the carton and
packing material have been carefully designed to protect the unit.
Under normal conditions no user maintenance or calibration are required. Internal links and preset controls may be set to configure the unit during installation. Any service work
required should be carried out by qualified service personnel only.
Weare able to offer further product support through our worldwide network of approved dealers and service agents.
To help us provide the most efficient service please would youkeep a record of the unit serial number, and date and place of purchase to be quoted in any communication
regarding this product.
The actual equipment Serial Number is indicated on the silver label stuck on the rear panel of the equipment closure.
Tools And Equipment Needed
Only standard technician’s tools are required to install thisequipment

17
FIRST INSTALLATION RECOMMENDATIONS |POWER SUPPLY CABLE
TIGER E5 · User Manual · ENG
8. FIRST INSTALLATION RECOMMENDATIONS
POWER SUPPLY CABLE
A power supply cable of approx. 2 mt length is supplied with the device, which has a moulded IEC plug attached –this is a legal requirement.
The type of plug for the power supply depends on the country in which it isdelivered.
If for any reason, you need to use this appliance with a different plug, you should use the following wiring guidelines in replacing the exsisting plug with the newone:
Earth
Green, or green and yellow
Neutral (N)
Blue
Live (L)
Brown
Supply cables should be laid in such a manner that one does not step or walk on them. They should not be squashed by any objects.
THIS EQUIPMENT MUST BE EARTHED.
The chassis is always connected to mains earth to ensure your safety: check your mains wiring and earthing before switching on.

18
FIRST INSTALLATION RECOMMENDATIONS |PROTECTION AGAINST LIGHTNING
TIGER E5 · User Manual · ENG
PROTECTION AGAINST LIGHTNING
Should the device be put out of action due to being struck by lightning or excess voltage, disconnect it from the power supply
without delay. Do not reconnect until the device has been checked. If in doubt contact the technical support service.
Make sure there is suitable lightning protection to protect the device.
Alternatively you should disconnect all connectors from the device during a storm or when the device is going to be
unsupervised or not used for a longer period of time.
These measures will protect against damage by lightning or excess voltage.

19
DEVICE INSTALLATION |VENTILATION
TIGER E5 · User Manual · ENG
VENTILATION
The equipment will operate as a free-standing unit without requiring any special cooling arrangement.
However, slots and openings in the product are provided for ventilation. They ensure reliable operation of the product, keeping it from overheating. These openings must not be
blocked nor covered during operation.
YOU MUST LEAVE AT A MINIMUM ONE RACK UNIT OF EMPTY SPACE ABOVE THE EQUIPMENT TO ENHANCE VENTILATION AND TO GET A LONGER EQUIPMENT LIFE.
9. DEVICE INSTALLATION
BEST SETUP LOCATION
The device should be installed in a 19” rack. Avoid direct sunlight, close proximity to radiators and air conditioning, dust, water, and chemicals. Choose a rack location that permits
a clear view to the indicators on the device and ensure a sufficient heat dissipation of thedevice.
POWER SUPPLY
The device is designed for operation with 100 to 240 V AC, 50 Hz to 60 Hz. Check the corresponding device labelling for compatibility to the domestic line voltage and frequency
before connecting the IEC power connector to the mains supply!
WARNING
Disconnect mains power plug before you open the housing. Repair of the
equipment must only be carried out by authorized and qualified personnel.

20
DEVICE INSTALLATION |POWER SUPPLY
TIGER E5 · User Manual · ENG
1
Power Supply
Please make sure that the device and the contained fuse(s) (please see
p. 20) are compatible to the domestic line voltage and frequency. If the
device is compatible, connect the power supply cord fully to the IEC
power connector at the rear side of the device and a mains power
outlet. The “LCD Screed” will then turn on.
2
Network configuration
For delivery, the device is configured with default settings for the first
connection via the IP interface.
3
Connect to network
Connect a network patch cable to the “10/100-Base-T” connector on the
rear side of the device and your existing IPnetwork.
4
Web interface
The device can be fully operated with an internet browser via the
integrated web interface. Use a computer that is connected to the same
IP network that the Tiger E5 device is connected to. Start an internet
browser, Firefox/Mozilla >V2.0 Google Chrome both with Java Script
activated and enter the configured IP address in the address bar of the
browser. If the IP address has not been changed in step 2, please enter
the default address in the address bar of the browser:
192.168.XXX.XXX.
5
Ready!
These first steps are only intended for a quick first start and do not
cover all device functions. Pease read carefully the entire manual to be
able to use all functions of thedevice.
6
Important note on the
Username and password
The equipment comes out from Axel Technology with a standard
username: admin and password: admin
Each time a NEW user, with administration rights is created, the user
admin disappear and it is replaced by the new one just created. If all
users are deleted, the standard admin –admin comes outagain