AXIATel AX-Fi User manual
Mobile Hotspot
AX-Fi
Quick Start Guide
AX ATel
Take your signal with you anywhereWi-Fi
AX-Fi is the new mobile hotspot that allows ou to bring our own personal
Wi-Fi with ou, wherever ou go, while providing Wi-Fi signal for up to 5
devices.
02
Here is what you need to know:
AX-Fi allows ou to have reliable internet
access, right from our pocket.
01
AX-Fi allows ou to stay connected with
remote network switching, in real time.
02
AX-Fi automaticall connects ou to the
most secure and stable networks, 24/7.
03
Welcome to AX-Fi!
03
Let’s Connect Your AX-Fi:
Open the top of your AX-Fi device, to
expose the USB cord.
01
Plug the USB cord into your computer’s
USB port, and you'll notice a green light
indicating the device is powering on.
02
After a short time, your AX-Fi will
automatically connect to the strongest
network signal available. Once
connected, the light will turn blue.
03
Once you’ve purchased and received an AX-Fi device, along with a data plan
from AXIATel.co, you're ready to start.
Setting up your AX-Fi device is easy; just follow these simple steps. If you need any
additional help, contact us anytime at , or follow
, for additional tips and tricks.
support
@
a
x
iatel
.
org AX
I
A
T
el on
Y
ou
T
u
b
e
04
Now that you’re plugged in and connected,
search for AXFi-10000 on your smartphone,
tablet, console, home assistant or any other
de ice requiring Wi-Fi.
04
The default password for your AX-Fi is:
123456789
To change your password, isit:
192.168.43.1.88
LOGIN: admin/admin
05
05
Charging your AX-Fi
To charge your de ice, simply plug it into any
powered USB port.
Data Alerts
When your AX-Fi device is running low on data,
you’ll be sent an email from AXIATel. This way,
you can stay connected. You can also iew your
data through the MyAXIATel app.
Need More Data?
AXIATel has you covered. Simply isit the top-
up page on , and select the data
plan for your AX-Fi de ice that works best for
you.
AXIATel.co
06
Security & Usage
Before using your AX-Fi device, please review the following instructions
to ensure you’re getting the best performance from your device.
Operational Environment
AXIATel recommends using your AX-Fi device within the temperature range of
0 C and 35 C, or 32 F to 95 F. You should also store your AX-Fi device and its
accessories within the temperature range of 10 C to 45 C, or 50 F to 113 F.
When the temperature is too high or too low, it may lead to hardware failure,
or reduced speeds
Do not place the device near an open heat source or exposed fire
source, such as an electric heater, microwave oven, oven, water heater,
stove, open fire, candle or others, that may produce high temperatures.
Accessory Requirements
Use only accessories approved by the AXIATel. If other types of accessories
are used, it may violate the warranty terms of the device and relevant
regulations where the device is located, and may lead to safety accidents.
Environmental Protection
When the AX-Fi device is wor
k
ing, the power soc
k
et shall be installed near
the e
q
uipment and shall be easy to reac
When the AX-Fi device is not in use, please disconnect the charger from
the device and unplug the charger from the power soc
k
e
Use of unapproved or incompatible power supplies, chargers or batteries
may cause fire, explosion or other accidents
07
Safety Usage Notice
When the device is not in use and full charged, please disconnect the
charger from the device.
Use of unapproved or incompatible power supplies, chargers or batteries
ma cause fire, explosion or other accidents.
When traveling b aircraft, please turn off (remove from the power suppl )
our AX-Fi device as it ma interfere with the control signal of the aircraft.
Please follow the rules and regulations in hospitals and health institutions.
Please turn off our AX-Fi device near medical devices.
Please turn off our AX-Fi device near high-precision electronic machines
as this ma affect the performance of these machines.
Do not attempt to disassemble our AX-Fi device.
Your AX-Fi device is not waterproof, so please keep it dr and keep it awa
from water or steam. Do not touch the device with wet hands. Otherwise, it
ma cause product short circuit, failure or electric shock hazard.
Do not place magnetic storage media near our AX-Fi device.
