Axus AXP10 User manual

●Use the specified power adapter, and immediately replace damaged adapter if any.
●Do not disassemble the instrument, nor modify internal parts. If it malfunctions, discontinue
the use immediately and have it repaired by professional serviceman.
●Before connecting the instrument to other devices, turn off all the power supplies.
●Do not play the instrument at the maximum volume or to an uncomfortable extent for a long
time.
●Keep the parts of the instrument off heat source, for overheat may cause damage.
●Prevent liquid, dust, particles and other foreign matters from entering the instrument to cause
corrosion of the instrument or short-circuit of its components.
●Pull the plug before cleaning the instrument. Do not insert or pull the plug with wet hands.
●Use dry and soft cloth to clean the instrument. Do not use paint, alcohol or other chemical
solvents to wipe the instrument so as to avoid damage to the instrument surface.
●Turn off the power supply and pull the plug after playing or in no-service condition for a long
time.
●To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
●Maximum Operating Temperature:40°C
●Direct plug-in adaptor is used as disconnect device, the disconnect device shall remain readily
operable.
●Do not install this equipment in a confined space such as a book case or similar unit, and
remain a well ventilation conditions.. The ventilation should not be impeded by covering the
ventilation openings with items such as newspaper, table-cloths, curtains etc.
●Warning:Excessive sound pressure from earphones and headphones can cause hearing
loss.
●The label location is on the bottomof the apparatus.
●The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids,such as vases,shall not be placed on apparatus.
●The direct plug-in adapter is used as disconnect device,the disconnect device shall remain
readily operable.
●This marking indicates that this product should not be disposed with other household
wastes throughout the EU.To prevent possible harm to the environment or human health
from uncontrolled waste disposal,recycle it responsibly to promote the sustainable reuse of
material resources.To return your used device,please use the return and collection systems or
contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
Music player control buttons
Speaker
Power Switch
Previous/NEXT
Play/pause
Stop
Volume control
Enter order/Random/
Single playing modes
Sound Effect
Master Volume
Accom Volume
Tempo
Record
Program
Null Play
LED display
One key
Follow
Ensemble
Demo song
Timbre
Rhythm
Numbers
Keyboard percussion
Auto Chord
Chord Timbre
Star/Stop
Sync
Fill In
Sustain
Panel Percussion
Vibrato
Chord Keyboard
U D IS K P O R T F O R P L AY ING
MU S I C ( F la s h d r i v e n o t i n c lu d e d )
A U D I O I N P U T
M IC I N P U T
P HO N E S /O U T P U T
D C 1 2V I N J A C K
AXP10
Owner’s Manual
Precautions
Please read them carefully before you use the instrument.
War ning!
●Front Panel Control
●Rear-Panel:
I.Panel Control and Extension Ports

●Selection of Timbres
There are 255 kinds of timbre reserved in the unit, from “000” to “254” freely, the preset
timbre is “000”. When the power supply is turned on, the timbre selection function is
enabled automatically. The target timbre can be picked out by pressing the number
buttons or pressing button 【+】or 【-】. While the number buttons are in the state of
other control, press【TIMBRE】button, all number buttons and 【+】/【-】are in effect
of timbre selection.
●Percussions
There are 8 panel percussions and 61 keyboard percussions.
Press panel percussion buttons and the related percussion can be reached.
Press【KEYBOARD PERCUSSION】button, the keyboard becomes percussion
keyboard transitorily, and a keystroke corresponds to a type of percussion. Press the
【KEYBOARD PERCUSSION】again to disable the keyboard percussion function and
the keyboard turns normal.
●Demonstration Songs
The instrument provides 24 demonstration songs from code 00 to 23. Press the
【DEMO SONG】 button to playback all of demonstration songs in sequence. Pressing
the 【DEMO SONG】 button again while it’s playing a song will skip the current
demonstration and jump to the next song. Press the【START/STOP】button again to
stop the demonstration songs. To switch to another song, press the numbers or 【+】/
【-】 on the numeric pads. The chosen song will be played in a single cycle.
During playback, another demonstration song can be selected by pressing the corresponding number
via number buttons or pressing “+” or “-” and then the system play the present song repeatedly.
IV. Auto-Rhythm
●Rhythm Selection
There are 255 kinds of rhythm reserved in the unit, from “000” to “254” to select freely, the preset
rhythm is “000”. The target rhythm can be picked out by pressing the number buttons or pressing
button 【+】or 【-】.While the number buttons are in the state of other control, press【Rhythm】
button, all number buttons and 【+】/【-】are in effect of rhythm selection.
●Rhythm Control
1.Start Rhythm
Press the 【START/STOP】button to start the accompaniment rhythm.
Press【SYNC】button, then to press any note of the 19 keys on the left part of the keyboard, the
rhythm accompaniment will be started synchronously.
2.Fill In
In the state of the rhythm, press the 【FILL IN】button, a piece of intermezzo can be filled in
automatically.
3.Stop the Accompaniment
Press the 【START/STOP】button, the accompaniment rhythm quits at once.
●Tempo Adjustment
The preset tempo is 255 beats/min. The tempo of the rhythm can be quickened or slowed by pressing
the 【TEMPO+】or 【TEMPO-】button . Apply the both at the same time, the tempo turns back to
the present one.
II Preparation for Performance
●Using AC/DC Power Supply Adaptor
The AC/DC power supply adaptor must be the one designated for the instrument. Please connect one
side to the power supply socket on the real-panel and the other to the city-power network. (Please
notice that the input voltage should be the same as that of the power network.)
●Audio Output/Headphone Connection ( Headphone is not included)
◆Audio Output: First turn off the power supply of the electronic keyboard and external sound
equipment, and then insert one end of the audio cable into the PHONES/OUTPUT interface for
audio output on the back of the electronic keyboard, and insert the other end into the audio input
interface of the sound equipment.
◆Headphone: The speakers will be automatically turned off when your headphones are
connected to PHONES/OUTPUT interface. You can thereby play the keyboard without disturbing
others.
Attention: To prevent potential hearing losses, keep your headphone volume in a moderate.
●Microphone input (Mic isn’t included)
Connect the microphone to the microphone jack and you can enjoy singing along with keyboard.
●Audio input
The electronic keyboard has the stereo audio input function, and audio signals of mobile phones,
MP3 players, computers and the like can be input into the electronic keyboard system to be played.
At fist, turn off the power supply of the electronic keyboard, insert the other end into the AUDIO
INPUT interface on the back of the electronic keyboard, and then turn on the power supply of the
electronic keyboard.
●Music Player
Insert the udisk plug into the UDISK interface on the back of the electronic keyboard and then you
can play the MP3 music in the udisk, the electronic keyboard supports the maximum 32G memory
and common MP3-format files.
1.Press volume control button of the music player to adjust to volume.
2.Press【 】 to play the previous,【 】 to play the next,【 】 to play/suspend, 【 】 to stop, and
【 】to enter order, random and single playing modes.
3.Press 【Effect】button to adjust the sound effect modes.
※Mp3 playing first: when MP3 music is playing, the “USB” will be showed on the display and the
“Guide/Demo/ Rhythm” functions cannot be used. If the
“Guide/Demo/ Rhythm” was playing before playing “mp3”，it would be stopped automatically when
the MP3 music starts.
III Basic Method of Performance
Press【POWER】button and the digital display shows”120”, the system is in the
standby state. Press it once more, the button will rise, and the instrument is power off.
●Master Volume Adjustment
Press 【MASTER VOL+】 or 【MASTER VOL-】 button to turn up or turn down the
master volume. The master volume is to recover to the default preset volume when
pressing【MASTER VOL+】 and 【MASTER VOL-】at the same time.
●Accom Volume Adjustment
Press 【ACCOM VOL +】or 【ACCOM VOL -】 button to turn up or turn down the
Accom Volume. The Accom volume is to recover to the default preset value when the
【ACCOM VOL +】 and【ACCOM VOL -】 are pressed at the same time.

V. Auto Chord
● Auto Chord
Press 【Auto Chord】to start the auto bass chord function. When the rhythm is started, automatic
chord accompaniment can be performed in the chord keyboard zone (Key 1-19 from the left)
according to the single finger chord fingerings or fingered chord fingerings.
※ The instrument can recognize both single-finger and fingered fingerings. It will accept whatever
fingerings that accord with the fingered, but accept the single-finger when the fingerings don’t accord
with the fingered.
Press the key【Auto Chord】again to disable the chord function.
● Chord Timbre
In the state of chord accompaniment, the timbre of chord can be changed by pressing the 【Chord
Timbre】button, and the original timbre can be regained by pressing it again.
(Single-finger Chord Scales) VI. Effect Control
● Sustain
Press 【SUSTAIN】 button to start the sustain function, press 【SUSTAIN】button again, the function
disappears.
● Vibrato
Press【VIBRATO】button to start the function, press【VIBRATO】button again, the function
disappears.
VII.Recording Function and Rhythm Programming
● Record
Press the 【REC】 button with “rEC” appearing on the display to start the recording function, the notes
that are played on keyboard can be recorded.
◆Press the【PLAY】button to play any note that have been recorded. After playing, the instrument
still remain in the record status for continue recording. The first record and the second record can be
played together. When the memory is full of notes, the screen will display “FUL”, recording will stop
automatically.
◆When the key 【START/STOP】or 【REC】is pressed again, the recording function off, and the
recorded notes will be deleted automatically.
● Rhythm Programming
Press the【PROGRAM】button with “Prg” shows on the display , the rhythm programming function is
enabled and the keyboard percussion is ready automatically, In this state, any bit piece of the panel or
keyboard percussion can be selected to edit a piece of rhythm.
◆When 32 percussions are recorded and the screen displays “FUL”, programming will stop
automatically.
◆ Press the【PLAY】button with “PLA” appearing on the display, the edited rhythm can be played
repeatedly.
◆ Press【START/STOP】or【PROGRAM】button, programming function off, and the programmed
data will be deleted automatically.
VIII. Intelligent Teaching Function
● Guide 1 : One Key
Press the 【One Key】 button to start the one-key teaching function. You can select the song to learn
by pressing the number key or pressing “+” or “-”. It is applied for the song duration exercise, with no
(Fingered Chord Scales)

requirements for the pitch and correctness thereby Improper playing of keys is allowed. The electronic
keyboard plays correct notes in case of errors, and the display shows the key corresponding to the
correct note.
The one-key teaching function can be disabled by pressing the【START/STOP】or【ONE KEY】
button again.
●Guide 2: Follow
Press the 【FOLLOW】 button to start the follow teaching function is enabled, you can select the song
to to learn by pressing the number key or pressing “+” or “-”. Follow function is applied for the song
duration exercise, you can play the song and the display shows the correct note, that will guide you to
play correctly. When an error is made during playing, the melody of the song will be stopped until you
correct the error.
Press 【START/STOP】button or【FOLLOW】button again to stop this function.
●Guide 3: Ensemble
Press the 【ENSEMBLE】button to start the ensemble teaching function. You can select the song to
be learned by pressing the number key or pressing “+” or “-“.
The ensemble teaching is applied for correct and comprehensive learning of the song duration and
notes. The keynote will be shielded by the electronic keyboard for ensemble. You should play the
correct notes within the song duration. If you fail to play within 3 seconds, the electronic keyboard will
automatically play the keynote.
Press 【START/STOP】or【Ensemble】button again to stop this function.
67