Azentek SmartMirror User manual

Revision 1.1
2010
www.azentek.com

ii
Smart Mirror User’s Guide
Revision 1.1
2010
Imprint
AZENTEK, LLC 10845 S. Saginaw Rd. Grand Blanc, MI 48439
The information contained herein may be changed at any time without prior notification. This manual nor any parts thereof may not be reproduced for any
purpose whatsoever without the express written consent of AZENTEK, LLC and INTRINSYC SOFTWARE INTERNATIONAL, INC., nor transmitted in any form
either electronically or mechanically, including photocopying and recording. All technical specifications, drawings, etc. are subject to copyright law.
© 2004-2008, INTRINSYC SOFTWARE INTERNATIONAL, INC.
© 2007-2008, AZENTEK, LLC
All rights reserved

iii
Smart Mirror User’s Guide
Revision 1.1
2010
End User License Agreement
End User License Agreement (“Agreement”) – This is a legal agreement between you, the end user, and AZENTEK, LLC/ INTRINSYC SOFTWARE
INTERNATIONAL, INC.
(“AZENTEK/INTRINSYC”). By using all or any portion of the Software you are agreeing to be bound by the terms of this agreement. This Agreement applies
to the use of software, pre-installed software on any of our hardware devices and accompanying items, including on CD-ROM, floppy disc, memory card,
download package or any other data carriers, and all contents and contents programs (“Software”).
Please read this Contract carefully. By using this software you agree that this Agreement is enforceable like any written negotiated Agreement signed by you.
This Agreement is enforceable against you and any legal entity that obtained the software.
If you do not agree to the terms of this Agreement, promptly return the unused software, unopened disk package and the accompanying items to the place
where you obtained them for a full refund.
1. OWNERSHIP: It is hereby understood and agreed by you that AZENTEK/INTRINSYC is the owner of all title, ownership rights, intellectual property rights
and copyrights in and to the Software. The Software shall remain the sole and exclusive property of AZENTEK/INTRINSYC and its licensors and
AZENTEK/INTRINSYC and its licensors will retain all patents, copyrights and other intellectual property rights in the Software, as applicable. You also
hereby understand and agree that AZENTEK/INTRINSYC and/or its third party licensors own all right, title and interest in and to all content included in the
Software, including, but not limited to, all intellectual property rights therein (the “Content”).
2. GRANT OF LICENSE: AZENTEK/INTRINSYC grants you the right to use one copy of the Software, provided it is used on only one computer or hardware
device at any time. The Software is in “use” on a computer or hardware device when it is loaded into temporary memory (e.g., hard disk, CD-ROM, or
other storage device) of that computer. This license does not grant any right to obtain future upgrades, updates or supplements (“upgrades”) of the
Software. Any updates are similarly governed by this Agreement and any accompanying amendments. Updates may be subject to additional costs and
provisions.
3. OTHER RESTRICTIONS: Except for the initial loading of the Software onto a Hardware Device or for archival/backup purposes as provided for above, you
may not rent or lease, broadcast, present, transfer, or distribute the Software and accompanying written materials. You may not reverse engineer,
decompile, reverse engineer or disassemble the Software. If Software is an upgrade, any transfer must include the upgrade and all prior versions. All
rights not specifically granted in this Agreement are reserved by AZENTEK/INTRINSYC.
4. TRANSFER: You may transfer the Software and this Agreement to another party to whom you may transfer the hardware devices and accompanying items
if the other party agrees to accept the terms and conditions of this Agreement. If you transfer the Software, you must simultaneously either transfer all
copies whether in printed or machine-readable form to the same party or destroy any copies not transferred, including all modifications and portions of
the program contained or merged into other programs. You shall not sub-license, lease, assign, or transfer the Agreement or the Software except as
expressly provided in this Agreement. Any attempt otherwise to sublicense, lease, assign, or transfer any of the rights, duties, or obligations hereunder
renders this License VOID.
5. LIMITATION OF WARRANTIES AND LIABILITIES: EXCEPT FOR THE LIMITED WARRANTY DOCUMENT INCLUDED WITH THE HARDWARE DEVICE,
IF ANY, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ALL SOFTWARE, OTHER COMPONENTS THEREOF AND SERVICES
ARE PROVIDED ON AN “AS IS” BASIS. YOU EXPRESSLY

iv
Smart Mirror User’s Guide
Revision 1.1
2010
ACKNOWLEDGE AND AGREE THAT YOUR USE OF THE SOFTWARE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY
QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU. EXCEPT AS OTHERWISE EXPRESSLY STATED IN THIS AGREEMENT,
AZENTEK/INTRINSYC DOES NOT MAKE, AND HEREBY EXPRESSLY DISCLAIMS, ANY AND ALL EXPRESS AND/OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT AND
TITLE, AND ANY WARRANTIES ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE. YOU UNDERSTAND AND AGREE THAT THE
USE OF THE SOFTWARE IS DONE AT YOUR OWN DISCRETION AND RISK AND THAT YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY LAW AND EXCEPT AS OTHERWISE EXPRESSLY STATED IN THIS AGREEMENT, AZENTEK/INTRINSYC
WILL NOT BE LIABLE OR RESPONSIBLE TO YOU OR ANY OTHER PERSON OR ENTITY FOR ANY TYPE OF DIRECT, INCIDENTAL, SPECIAL,
PUNITIVE, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST REVENUE, LOST PROFITS, REPLACEMENT
GOODS, LOSS OF PROPRIETARY MATERIAL, RIGHTS OR SERVICES, BUSINESS INTERRUPTION, LOSS OR CORRUPTION OF ELECTRONIC
COMMUNICATIONS, OR INTERRUPTION OR LOSS OF USE OF SERVICES OR EQUIPMENT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OTHER PECUNIARY LOSS, AND WHETHER ARISING UNDER THEORY OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY OR OTHERWISE, EVEN IF INTRINSYC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR THEY ARE FORESEEABLE.
IN NO EVENT SHALL AZENTEK/INTRINSYC ’S TOTAL LIABILITY (WHETHER ARISING UNDER A THEORY OF CONTRACT, TORT, INCLUDING
NEGLIGENCE, STRICT LIABILITY OR OTHERWISE) UNDER OR IN CONNECTION WITH THIS AGREEMENT OR BASED ON ANY CLAIM FOR
INDEMNITY OR CONTRIBUTION EXCEED THE AMOUNT OF PURCHASE PRICE OF THE AGREEMENT. SOME JURISDICTIONS DO NOT ALLOW THE
LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT APPLY TO
YOU.
1. CONFIDENTIALITY: You acknowledge that the Software contains proprietary trade secrets and you hereby agree to maintain the confidentiality of
Software and not to disclose or provide access thereto to any person.
2. THIRD PARTY SOFTWARE LICENSES: AZENTEK/INTRINSYC may make use of third party software. Notwithstanding the terms and conditions of this
License, use of some third party materials included in the Software may be subject to other terms and conditions.
3. TERMINATION: This Agreement automatically terminates if you fail to comply with the terms hereof or if you attempt to assign the Agreement or transfer
the Software to a third party except as expressly permitted in this Agreement. If such should occur, you must destroy all copies of the Software and all of
its component parts. All provisions of this Agreement, except for the license grant above, survive the termination of this Agreement.
4. ENTIRE AGREEMENT: The terms and conditions of this Agreement, including any addendum or agreement to it which may be included with the
accompanying package of the Software (and/or Hardware), plus the Limited Warranty, if applicable, reflect the entire agreement between You and
AZENTEK/INTRINSYC with respect to the subject matter hereof and will supersede and replace all prior understandings and agreements, in whatever
form, regarding the subject matter. This Agreement shall not be modified or amended except in writing signed by AZENTEK/INTRINSYC. This
Agreement shall take precedence over any other documents that may be in conflict therewith.
5. TRANSLATIONS: The original English version of this Agreement may have been translated into other languages. The English version of this Agreement
is the controlling version.
6. JURISDICTION AND DISPUTES

v
Smart Mirror User’s Guide
Revision 1.1
2010
This Agreement is governed by the laws of the State of Michigan without regard to its conflict of laws rules.
All disputes hereunder shall be resolved in the applicable state or federal courts of the State of Michigan located within Genesee County, Michigan. To the
extent permitted by law the parties consent to the jurisdiction of such courts, agree to accept service of process by mail, and waive any jurisdictional or venue
defenses otherwise available.
12. SEVERABILITY
If at any time any one or more of the provisions of this Agreement become invalid, illegal or unenforceable in any respect for any reason, the validity, legality
and enforceability of any such provision in every other respect and of the remaining provisions of this Agreement shall not be in any way impaired
. Copyright
Copyright © 2008 Intrinsyc Software International, Inc.
DestinatorTM and its related logos are trademarks, applications or registered trademarks owned by Intrinsyc Software International, Inc.
This document contains proprietary information of Intrinsyc Software International, Inc. that is protected by copyright. No part of this document may be photocopied, reproduced or
translated to another language without the prior consent of Intrinsyc Software International, Inc.
Disclaimer
The information in this user manual is for general guidance. Images in the manual may resemble but not exactly match the images that are displayed in the navigation software.
Some features described in this manual may not be available or the features described may be limited, depending on the navigation software.
Intrinsyc Software International, Inc. disclaims all responsibility for results caused by differences between this user manual and the accompanying navigation software and shall not
be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this
material.
The information in this user manual is provided “as is” without warranty of any kind, including, but not limited to, implied warranties of merchantability and fitness for a particular
purpose, and is subject to change without notice. Nothing herein shall be construed as constituting a warranty.

vi
Smart Mirror User’s Guide
Revision 1.1
2010
This page intentionally left blank.

vii
Smart Mirror User’s Guide
Revision 1.1
2010
Contents
If at any time any one or more of the provisions of this Agreement become
invalid, illegal or unenforceable in any respect for any reason, the validity,
legality and enforceability of any such provision in every other respect and
of the remaining provisions of this Agreement shall not be in any way
impaired v
1. Introduction 8
2. Menus 9
3. Creating a Route 10
Address 10
Selecting Address Intersection 11
Changing State or In Other Countries 12
Travelling To Options 12
POI 13
Searching by POI Categories 13
Searching by POI Name 14
Browsing the Entire POI List 15
Travelling To Options 15
Recent Locations 16
Travelling To Options 16
Favorite Locations 16
Saving a Location 17
Travelling to a Favorite Location 17
Creating Groups for Favorite Locations 18
Travelling To Options 18
4. Additional Destinator Features 19
Driving Directions 19
Showing Entire Route and Next Turn Maps 20
Road Type and Route Mode 21
Detours 22
1. Maps 23
Map Icons 24
Travel by Tapping the Map 26
Night Map View 26
Browse Map 27
Map Display 27
Map Selection 29
2. Settings 30
Configuration Wizard 30
POI Display 31
Voice Prompts 31
Units of Measure 33
Language 33
Time Display 34
QuickNav 34
Look & Feel 35
Demo Route 35
GPS Signal 36
Configuring GPS Settings 36
Help 37
Technical Support 38
810-694-4500 [email protected] www.azentek.com 38
About 39
Index 40

8
Smart Mirror User’s Guide
Revision 1.1
2010
1. Introduction
Welcome to the world of mobile navigation! Simple operation, clear maps in 2D or 3D mode as well as numerous
innovative features and functions have made Destinator the essential guide for every traveler - whether in the car, on
foot or on a bike.

9
Smart Mirror User’s Guide
Revision 1.1
2010
2. Menus
Displayed below are Destinator’s main menus.
Go –Lets you select a location to travel to
Map –Displays route and map options.
Settings –Lets you choose setting options.
Manage Route –Additional features that determine the route.

10
Smart Mirror User’s Guide
Revision 1.1
2010
3. Creating a Route
Address
1. Tap
2. Tap
3. Select an address entry mode:
Town/City First displays cities first and is most commonly-used.
Street First displays the street list and then the cities list.
Intersections or Road Junctions lets you travel to a designated
cross-street location.
Postcode lets you select the postcode, street and address number.
4. Enter City
5. Enter Street
6. Enter Address Number
or Point on the Street
7. Tap Go

Creating a Route
11
Smart Mirror User’s Guide
Revision 1.1
2010
SelectingAddress Intersection
You can instruct Destinator to create a route to a selected intersection.
1. Tap Intersections
2. Select city and tap OK
3. Select a street and tap OK
4. Select a cross street
and tap OK
5. Tap Go

Creating a Route
12
Smart Mirror User’s Guide
Revision 1.1
2010
Changing State or In Other Countries
You can change from one state to another. The State screen shows the states that are available in the current map.
When using a European map, the Change State button becomes In Other Countries, which lets you create a route to a
location in another country.
1. Tap In Other Countries
2. Select state and tap OK
Travelling To Options
You can select from the following options:
Save –Store address to a selected folder.
Start Point –Designate address as the starting point.
Demo Route –Run simulated route to selected address.

Creating a Route
13
Smart Mirror User’s Guide
Revision 1.1
2010
POI
Points of Interest (POI) are a collection of thousands of interesting or useful places organized into easy-to-find categories
and subcategories.
Searching by POI Categories
1. Tap
2. Tap
3. Tap a Search Around
option (My Current
Location is selected by
default) and the
Category button
4. Tap a category
Search-Around Options:
My Current Location –Search near your current
location.
My Destination –Search near your destination.
Another City –Search in another city.
5. Tap a subcategory
6. Tap the location and OK
7. Tap Go

Creating a Route
14
Smart Mirror User’s Guide
Revision 1.1
2010
Show on Map –Tap to show the locations on the Show on Map screen. The Result Number buttons correspond to the
screen results. Tap the button to display the location address and to centre the location on the map. When you have
selected a location, click OK to display the Travelling To screen.
Searching by POI Name
You can search for a POI by entering the entire name, individual words in the name, or letters in the words. For example
to search for Bank of America, you can enter "bank of america", "america", "bank", "amer", or "ica".
1. Tap the Name button.
2. Enter a search string and tap
the Search button.
3. Select location and tap OK to
Travelling To screen. Tap the Scroll
Down key to see the next six results.
Sort by ABC –Shows locations alphabetically and not by distance from your location.
Sort by Distance –Shows locations by distance from your current location, and not alphabetically.
Show on Map –Tap to show the locations on the Show on Map screen. The Result Number buttons
correspond to the screen results. Tap the button to display the location address and to centre the location on
the map. When you have selected a station, click OK to display the Travelling To screen.

Creating a Route
15
Smart Mirror User’s Guide
Revision 1.1
2010
Browsing the Entire POI List
You can display the entire POI Category list.
1. Tap
2. Select a POI category
and tap OK
3. Select a POI location
and tap OK
4. Tap Go
Travelling To Options
For information, see the Travelling To Options on page 12.

Creating a Route
16
Smart Mirror User’s Guide
Revision 1.1
2010
Recent Locations
You can select from a list of recent locations that you have travelled to.
1. Tap
2. Tap
3. Select a location
4 Tap Go
Travelling To Options
For information, see the Travelling To Options on page 12.
Favorite Locations
A Favorite location is a destination that you have stored for easy retrieval.

Creating a Route
17
Smart Mirror User’s Guide
Revision 1.1
2010
Saving a Location
From the Save Location screen, you can tap the right and left arrow keys to select a group to where you want to save
your location. To create a group, see Creating Groups for Favorite Locations on page 18.
1. Tap Save.
2. Enter a name for the location, select a group
(optional), and tap OK. The location is automatically
saved in My Favorites if a group is not selected.
Travelling to a Favorite Location
1. Tap
2. Tap
3. Select the location
and tap OK
4. Tap Go

Creating a Route
18
Smart Mirror User’s Guide
Revision 1.1
2010
Creating Groups for Favorite Locations
You can use groups to organize your favorite locations.
1. Tap
2. Tap
Additional Commands:
Tap Edit Group to rename a selected group
Tap Delete Group to remove a selected group
3. Enter a group name
and tap OK
4. The group appears
5. Save favorites in group
Travelling To Options
For information, see the Travelling To Options on page

19
Smart Mirror User’s Guide
Revision 1.1
2010
4. Additional Destinator Features
Driving Directions
The Driving Directions screen displays travel instructions as you navigate the route.
1. Tap
or
(on map)
2. Tap
3. Tap
4. Displays travel instructions from
start point to end point

Additional Destinator Features
20
Smart Mirror User’s Guide
Revision 1.1
2010
Showing Entire Route and Next Turn Maps
Displays the entire route
Display the selected turn
Tap Prior to show the previous turn
Tap Next to show the next turn
Removes the turn and recalculates the route