B.E.G. LUXOMAT ALC-B-360 DECO SLS User manual

2
LUXOMAT® ALC-B-360 DECO SLS
3
41
1
2
Installation and Operating Instruction for Automatic-system-light LUXOMAT®ALC-B-360 (DECO) SLS with motion detector
4. Putting into operation / Settings
Twilight-switch for light control / follow-up time
Infinitely variable setting from approx. 4sec.
to approx. 10 min.
1. Assembly ALC-B-360 SLS 3. Attaching the system glass
1) Un-fasten the stud screws (1)
2) Put system glass on socket ring (2)
3) Fasten the screws equally on all sides until the
system-glass is firmly attached (3).
5. Mounting types
1) Wall mounting
6. Range control
Detection area can be
adapted to the local
circumstances by turn-
ing the round optics.
1) Detach lighting part from the base by means
of a screwdriver (a)
2) Insert the cable, from the bottom (b) or from
the back here
3) Connect the cables as indicated by the termi-
nal labels (see point 13 for wiring diagrams)
4) Attach the assembly base with two screws (c)
5) Screw in incandescent lamp E27/100 W
6) Secure system glass to system light lower
section (see point 3)
2. Installation
7. Sensitivity adjustment (mounting height 1.80 m)
1) Range walking across:
approx. 10 m
2) Range walking towards:
approx. 8 m
1) If possible mount unit on a safe place.
2) Influence of weather reduces the lifetime
of the unit. Please take care to mount
correctly.
8. Mounting place
walking across
walking towards
anti-creep
1
2
quer zum Melder gehen
frontal zum Melder gehen
Unterkriechschutz
quer zum Melder gehen
frontal zum Melder gehen
Unterkriechschutz
quer zum Melder gehen
frontal zum Melder gehen
Unterkriechschutz
1) System light lower section can be freely
combined with 17 different System-Globes SG
2) Socket ring with stud screws
3) Horizontally and vertically swivelling sensor
head
4) Decorative LED secondary light (only ALC-B-
360-DECO SLS) switchable by remote control
5) Plug-in connector base
5
a
b
c
c
Arrow position left: approx. 4sec.
Arrow position right: approx. 10min.
Photo electric switch
Infinitely variable setting from approx. 2 to
approx. 1000Lux by turning.
Arrow position on symbol “moon“
night-time operation, approx. 2 Lux
Arrow position on symbol “sun“
daytime operation,
approx. 1000 Lux 2) Outside corner mounting with plug-in socket
3
12
DECO (only ALC-B-360-DECO)
If below set light value (60sec.),
the LED will switch on.
120°
8 m
10 m
6 m
4 m
1.80 m
1
2
GB

MAN 5905 – 121012-2
Caution: have all work involving
the 230 V mains supply carried
out by a qualified electrician!
Before starting disconnect the
mains!
14. Technical data
Power supply: 230 V~ ±10 %
Range: approx. 10m by 1.80m mounting height
Lamps: E27/100 W
Total switching power: 200 W
Time settings: 4 sec. - approx. 10min.
Light sensor: approx. 2 - 2000 Lux
Detection area: 360° vertical
120° horizontal
Degree of protection/class: IP44 / II
Dimensions: L 185 x W 107 x H 147mm
Material: UV-stabilised Polycarbonate
Colours: white / black
Mounting types: wall mounting, outside corner
mountable with plug-in socket (optional)
Inserting of the connection cable: from the
bottom or from the back
Electrical adjustments: in traditional manner
with potentiometers valid for follow-up time,
light sensor
15. Dimensions (mm)13. Wiring diagrams
Option:
17 different System-Globes
53
45
TOP
1010
22 28
144
95
41
52
Parallel switching of lamps.
Standby
Switching is manually possible.
Standby
additonally manual switching is possible (NC-contact
to press for approx. 2 sec.).
Standard operation with external push button
L N L'
Additional connection of further light fixtures over
contact L’ is possible.
Operation with further light fixtures
L N L'
Standard operation with external switch
L N L'
Parallel-operation
L N L' L N L'
Terminal connection for standard operation
Standby
L N L'
11
LUXOMAT®IR-LCmini (accessory, see point 16)
Caution: Settings with remote control subscribe the settings
by courtesy of potentiometers (see point 4) (for description
see point 10).
9. Settings of remote control
PARTY
COMFORT
14
Vacation- and comfort function
Switching ON/OFF
On: By achieving the Lux value 1 hour
daylight independent of mouvements,
then normal operation (switching time
changeable, see point 14)
Reset
Light OFF, then automatic mode
Light ON for 12h / Light OFF for 12 h
By pressing once the party button, the
light is switched on for a period of 12
hours. By pressing the party button
twice, the light remains switched off
until the next evening (see point 11).
10. Functions of LUXOMAT® IR-LCmini
Test operation
Switches the light ON/OFF when
movement is detected.
Light OFF
Switches the light ON again when move-
ment is detected.
11. Activation “Light OFF”
Because of the sabotage protection the function
“Light OFF” is deactivated in the factory. When
required it must be activated again:
1. Mains to be disconnected
2. Mains to be connected - a self test cycle
of 60sec. starts (the LED is flashing, see
point 5).
3. Activation/deactivation of the function “Light
OFF ” can be done only during the self
testing cycle
For a ctivation of the function „Light OFF“
the button „Light OFF“ must be pressed
during the self testing cycle (the LED will
flash quickly).
For deactivation „Light OFF“ the button
„Reset“ must be pressed during the self
testing cycle (the LED will flash slowly).
Caution: The implementation of “Reset” with
potentiometers or with remote control (see point
10) does not influence the activation/deactiva-
tion of the function “Light OFF”.
12. Vacation- and comfort function
The duration of the on-period can be adjusted:
1. “Unlock” unit with remote control
2. The button “Comfort“ to be operated. The
LED flashes for 10 sec.
3. During these 10 seconds the duration of the
light-on period can be selected: from e.g.
15sec. = 15 min. up to 16 min. = 16 hrs
4. The unit to be locked with the button “Lock”.
5. “Vacancy/Comfort” is activ now
(deactivation see point 10)
Caution: If the “Vacation- and comfort function”
is active or with lower deviation of the Lux value
the LC-plus turns on the light again after a time
delay of 60 sec.
16. Article / Part nr. / Accessory
LUXOMAT® Automatic system lamp :
ALC-B-360 DECO SLS white: 91351
black: 91352
ALC-B-360 SLS white: 91301
black: 91321
Accessory (optional)
Remote control (only for ALC-B-DECO):
LUXOMAT®IR-LCmini grey 92093
LUXOMAT®
Socket base for outside corner mounting :
ALC-ES white: 91305
ALC-ES black: 91325
RESET
TEST
PARTY
COMFO
RT
IR-LCmini