Baby Lock emore BLMR Technical manual

CONGRATULATIONS ON CHOOSING
OUR MACHINE
Your machine is the most advanced computerized household embroidery machine.
To fully enjoy all the features incorporated, we suggest that you study the manual.
PLEASE READ BEFORE USING THIS MACHINE
For safe operation
1. Be sure to keep your eye on the needle while embroidering. When machine is running do not
touch the handwheel, thread take-up lever, needle, or other moving parts.
2. Remember to turn off the power switch and unplug the cord when:
• Operation is completed
• Replacing or removing the needle or any other parts
• A power failure occurs during use
• Maintaining the machine
• Leaving the machine unattended.
3. Plug the machine directly into the wall. Do not use extension cords.
For a longer service life
1. When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store
the machine near a space heater, iron, halogen lamp, or other hot objects.
2. Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders
can damage the case and machine, and should never be used.
3. Do not drop or hit the machine.
4. Always consult the operation manual when replacing or installing any assemblies, the presser
feet, needle, or other parts to assure correct installation.
For repair or adjustment
In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in
the back of the operation manual to inspect and adjust the machine yourself. If the problem persists,
please consult your local authorized Baby Lock retailer.
The contents of this manual and specifications of this product are subject to change without notice.
For additional product information and updates, visit our web site at www.babylock.com

1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Important Safety Instructions
Please read these safety instructions before attempting to use the machine.
This machine is intended for household use.
DANGER - To reduce the risk of electric shock:
1Always unplug the machine from the electrical outlet immediately after using, when cleaning,
when making any user servicing adjustments mentioned in this manual, or if you are leaving the
machine unattended.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons.
2Always unplug the machine from the electrical outlet when removing covers, lubricating, or
when making any adjustments mentioned in the instruction manual:
• To unplug the machine, switch the machine to the symbol “O” position to turn it off, then grasp
the plug and pull it out of the electrical outlet. Do not pull on the cord.
• Plug the machine directly into the electrical outlet. Do not use an extension cord.
•Always unplug your machine if the power is cut.
3Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or water is spilled on the unit. Return the machine to the nearest
authorized retailer or service center for examination, repair, electrical or mechanical adjustment.
While the machine is stored or in use if you notice anything unusual, such as an odor, heat,
discoloration or deformation, stop using the machine and immediately unplug the power cord.
When transporting the machine, be sure to carry it by its handle. Lifting the machine by any other
part may damage the machine or result in the machine falling, which could cause injuries.
When lifting the machine, be careful not to make any sudden or careless movements, otherwise
you may injure your back or knees.
4Always keep your work area clear:
•Never operate the machine with any air openings blocked. Keep ventilation openings of the
machine free from the build up of lint, dust, and loose cloth.
•Do not use extension cords. Plug the machine directly into the electrical outlet.
•Never drop or insert any object into any opening.
•
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
•Do not use the machine near a heat source, such as a stove or iron; otherwise, the machine,
power cord or garment being embroidered may ignite, resulting in fire or an electric shock.
5Special care is required when embroidering:
•Always pay close attention to the needle. Do not use bent or damaged needles.
• Keep fingers away from all moving parts. Special care is required around the machine needle.
• Switch the machine to the symbol “O” position to turn it off when making any adjustments in the
needle area.
•Do not use a damaged or incorrect needle plate, as it could cause the needle to break.
•Do not push or pull the fabric when embroidering.

2
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
6This machine is not a toy:
• Your close attention is necessary when the machine is used by or near children.
• The plastic bag that this machine was supplied in should be kept out of the reach of children or
disposed of. Never allow children to play with the bag due to the danger of suffocation.
• Do not use outdoors.
7For a longer service life:
• When storing this machine, avoid direct sunlight and high humidity locations. Do not use or store
the machine near a space heater, iron, halogen lamp, or other hot objects.
• Use only neutral soaps or detergents to clean the case. Benzene, thinner, and scouring powders
can damage the case and machine, and should never be used.
• Always consult the operation manual when replacing or installing any assemblies, the presser feet,
needle, or other parts to assure correct installation.
8For repair or adjustment:
• If the Light unit (light-emitting diode) is damaged, it must be replaced by authorized retailer.
• In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table
in the back of the operation manual to inspect and adjust the machine yourself. If the problem
persists, please consult your local authorized retailer.
Use this machine only for its intended use as described in this manual.
Use accessories recommended by the manufacturer as contained in this manual.
Use only the interface cable (USB cable) included with this machine.
Save these instructions.
The contents of this manual and specifications of this product are subject to change without notice.
For additional product information, visit our web site at www.babylock.com

3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Federal Communications Commission (FCC)
Declaration of Conformity (For USA Only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the retailer or an experienced radio/TV technician for help.
• The included interface cable should be used in order to ensure compliance with the limits for a
Class B digital device.
• Changes or modifications not expressly approved by Tacony Corporation could void the user's
authority to operate the equipment.
Responsible Party: Tacony Corporation
1760 Gilsinn Lane, Fenton, Missouri 63026
declares that the product
Product Name:
Model Number:
Baby Lock Embroidery Machine
BLMR

4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Contents
Important Safety Instructions ..............................................................................................1
Introduction ........................................................................................................................7
Machine Features ................................................................................................................7
Accessories..........................................................................................................................8
Included accessories .........................................................................................................................................8
Optional accessories .........................................................................................................................................9
Names of Machine Parts and Their Functions ...................................................................10
Front view.......................................................................................................................................................10
Needle and presser foot section ......................................................................................................................11
Right-side/rear view ........................................................................................................................................11
Operation buttons ...........................................................................................................................................12
Operation panel..............................................................................................................................................13
GETTING READY 15
Embroidery step by step ....................................................................................................16
Attaching the Embroidery Unit..........................................................................................17
Embroidery unit precautions ........................................................................................................................... 17
Attaching the embroidery unit......................................................................................................................... 17
Removing the embroidery unit ........................................................................................................................ 19
Turning the Machine On/Off.............................................................................................20
Power supply precautions ...............................................................................................................................20
Turning on the machine .................................................................................................................................. 21
Turning off the machine ..................................................................................................................................21
LCD (Liquid Crystal Display) Operation............................................................................22
Viewing the LCD.............................................................................................................................................22
Changing the machine settings........................................................................................................................23
Checking machine operating procedures ........................................................................................................25
Winding/Installing the Bobbin...........................................................................................26
Bobbin precautions .........................................................................................................................................26
Winding the bobbin ........................................................................................................................................26
Installing the bobbin .......................................................................................................................................29
Upper Threading ...............................................................................................................31
About the spool of thread................................................................................................................................31
Threading the upper thread .............................................................................................................................32
Threading the needle ...................................................................................................................................... 34
Threading the needle manually (without using the needle threader) ................................................................ 36
Replacing the Needle ........................................................................................................37
Needle precautions .........................................................................................................................................37
Checking the needle .......................................................................................................................................38
Replacing the needle.......................................................................................................................................38
EMBROIDERY 41
Embroidering Neatly .........................................................................................................42
What to prepare ..............................................................................................................................................42
Preparing the Fabric ..........................................................................................................44
Attaching an optional stabilizer material to the fabric......................................................................................44
Setting the fabric in the embroidery frame.......................................................................................................45
Attaching the Embroidery Frame.......................................................................................48
Attaching the embroidery frame ...................................................................................................................... 48
Removing the embroidery frame ..................................................................................................................... 49
Selecting Embroidery Patterns...........................................................................................50
Copyright information .................................................................................................................................... 50
Embroidery pattern types.................................................................................................................................50
LCD (liquid crystal display) operation .............................................................................................................51
Selecting characters ........................................................................................................................................53
Selecting a Baby Lock Exclusive pattern/embroidery pattern ........................................................................... 54
Selecting a frame pattern................................................................................................................................. 55
Using an embroidery card (sold separately).....................................................................................................56

5
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Embroidering.....................................................................................................................57
Embroidering attractive finishes.......................................................................................................................57
Embroidering a pattern.................................................................................................................................... 58
Appliquéing ...................................................................................................................................................60
Editing Patterns .................................................................................................................62
Adjusting the layout ........................................................................................................................................62
Adjusting the thread tension............................................................................................................................ 64
Resewing ........................................................................................................................................................65
Thread runs out partway through a design.......................................................................................................65
Stopping while embroidering ..........................................................................................................................66
Using the Memory Function ..............................................................................................68
Embroidery data precautions...........................................................................................................................68
Saving patterns................................................................................................................................................69
Retrieving embroidery patterns from the computer..........................................................................................70
APPENDIX 73
Care and Maintenance ......................................................................................................74
Cleaning the machine surface .........................................................................................................................74
Cleaning the race ............................................................................................................................................74
Cleaning the bobbin case................................................................................................................................ 75
Attaching the Embroidery Foot..........................................................................................76
Attaching the embroidery foot “Q”..................................................................................................................76
Troubleshooting ................................................................................................................78
Error messages ................................................................................................................................................82
Adjusting the LCD...........................................................................................................................................84
Operation beep...............................................................................................................................................84
Canceling the operation beep .........................................................................................................................85
Upgrading Your Machine’s Software.................................................................................86
Index .................................................................................................................................87

6
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Introduction 7
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Introduction
Thank you for purchasing this embroidering machine. Before using the machine, carefully read the
“Important Safety Instructions” (page 1), and then study this manual for the correct operation of the
various functions. In addition, after you have finished reading this manual, store it where it can quickly be
accessed for future reference.
Machine Features
aSimple bobbin-winding
The bobbin can quickly and easily be wound with thread (page 26).
bQuick-set bobbin
You can start embroidering without pulling up the bobbin thread (page 29).
cAutomatic thread cutting
The thread can be cut automatically after embroidering (page 52).
dEmbroidery
You can embroider built-in embroidery patterns, characters, framed decorations, and designs from optional embroidery
cards (page 41).
32
1
4

8
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Accessories
Included accessories
After opening the box, check that the following accessories are included. If any item is missing or
damaged, contact your retailer.
1. 2. 3.*4. 5. 6. 7. 8. 9. 10.
11. 12. 13. 14. 15. 16. 17. 18.
19.
*75/11 3 needles
90/14 1 needles
20.
No. Part Name Part Code No. Part Name Part Code
1 Seam ripper X54243-051 11 Operation manual XE2795-001
2 Bobbin (4) X52800-120 12 Quick reference guide XE2796-001
3 Needle set X59535-051 13
Embroidery foot “Q” (on machine) XD0474-051
4 Cleaning brush X59476-021 14
Embroidery set (large)
H 18 cm
× W 13 cm
(H 7 inches
× W 5 inches)
EF84:Frame
EF89:Embroidery sheet
5 Screwdriver (large) XC8349-021 15 Poly 90 weight bobbin thread BBTE-W
6 Screwdriver (small) X55468-051 16 USB cable XD0745-051
7 Spool cap (large) 130012-054 17 Scissors XC1807-121
8 Spool cap (medium) XE1372-001 18 Dust cover XZ5004-021
9 Spool cap (small) 130013-154 19 Accessory bag XC4487-021
10 Spool net XA5523-020 20 Power Cord XC6052-021

Accessories 9
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Optional accessories
The following are available as optional accessories.
Memo
z All specifications are correct at the time of printing. The part codes are subject to change without notice .
zVisit your Baby Lock retailer for a complete listing of optional accessories available for your machine.
zUse Baby Lock embroidery cards with your machine. Please see your retailer for availability of
embroidery cards or visit the Baby Lock web site at www.babylock.com
1. 2. 3. 4.
5.
No. Part Name Part Code No. Part Name Part Code
1 Poly 90 weight bobbin thread BBTE-W 4
Embroidery set (medium)
H 10 cm × W 10 cm
(H 4 inches × W 4 inches)
EF83:Frame
EF88:Embroidery sheet
2 Embroidery card –5
Embroidery set
(multi-position (extra large))
H 30 cm × W 13 cm
(H 12 inches × W 5 inches)
EF85:Frame
EF90:Embroidery sheet
3Embroidery set (small) H 2 cm × W 6 cm
(H 1 inch × W 2-1/2 inches)
EF82:Frame
EF87:Embroidery sheet

10
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Names of Machine Parts and Their Functions
The names of the various parts of the machine and their functions are described below. Before using the
machine, carefully read these descriptions to learn the names of the machine parts.
Front view
aThread guide plate
Pass the thread under the thread guide plate.
bThread guide cover
Pass the thread behind the thread guide cover when
threading the upper thread.
cSpool pin
Place a spool of thread on the spool pin.
dBobbin winding thread guide and pretension disk
Pass the thread under this thread guide and around the
pretension disk when winding the bobbin thread.
eTop cover
Open the top cover to place the spool of thread on the
spool pin.
fBobbin winder
Use the bobbin winder when winding the bobbin.
gOperation panel
From the operation panel, patterns can be selected and
edited, and operations for using the machine can be
displayed (page 13).
hEmbroidery unit connector slot
Plug in the connector for the embroidery unit.
iPresser foot lever
Raise and lower the presser foot lever to raise and lower
the presser foot.
jOperation buttons
Use these buttons to operate the machine (page 12).
kEmbroidery unit
Attach the embroidery unit to the machine, and then
attach the embroidery frame.
lThread cutter
Pass the threads through the thread cutter to cut them.
mNeedle threader lever
Use the needle threader lever to thread the needle.
nThread take-up lever check window
Look through the window to check the position of the
take-up lever.

Names of Machine Parts and Their Functions 11
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Needle and presser foot section
aThread guide disk
Pass the thread through the thread guide disk when
using the needle threader to thread the needle.
bNeedle bar thread guide
Pass the upper thread through the needle bar thread
guide.
cNeedle plate
When the needle is lowered, it enters the hole in the
needle plate.
dNeedle plate cover
Remove the needle plate cover to clean the bobbin case
and race.
eBobbin cover/bobbin case
Remove the bobbin cover, and then insert the bobbin
into the bobbin case.
fEmbroidery foot “Q”
This presser foot is used for embroidering.
Right-side/rear view
aHandle
Carry the machine by its handle when transporting the
machine.
bHandwheel
Turn the handwheel toward you to raise and lower the
needle. Always turn the handwheel towards you
(counterclockwise).
cEmbroidery card slot
Insert the embroidery card.
dUSB port connector
Plug the USB cable into the USB port connector.
eAir vent
The air vent allows the air surrounding the motor to
circulate. Do not cover the air vent while the machine is
being used.
fPower supply receptacle
Insert the plug on the power cord into the power supply
receptacle.
gMain power switch
Use the main power switch to turn the machine ON and
OFF.
Memo
zRefer to pages 10 through 13 while you are
learning to use your machine.

12
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation buttons
The operation buttons help you to easily perform various basic machine operations.
a“Start/Stop” button /
Press the “Start/Stop” button to start or stop embroidering.
The machine embroiders at a slow speed while the button
is pressed. When embroidering is stopped, the needle is
lowered in the fabric.
The button changes color according to the machine’s
operation mode.
b“Needle Position” button
Press the “Needle Position” button to raise or lower the
needle. Pressing the button twice sews one stitch.
c“Thread Cutter” button
Press the “Thread Cutter” button after embroidering is
stopped to cut both the upper and the bobbin threads.
CAUTION
Note
zDo not press (“Thread Cutter” button)
if there is no fabric under the presser foot or
while the machine is embroidering,
otherwise damage to the machine may
occur.
zWhen cutting thread thicker than #30, nylon
thread or other special threads, use the
thread cutter on the side of the machine.
Green: The machine is ready to embroider or
is embroidering.
Red: The machine can not embroider.
Orange: The machine is winding the bobbin
thread, or the bobbin winder shaft is
moved to the right side.
●Do not press (“Thread Cutter”
button) after the threads have already
been cut, otherwise the needle may
break, the threads may become tangled
or damage to the machine may occur.

Names of Machine Parts and Their Functions 13
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation panel
The front operation panel has a LCD (liquid crystal display) and operation keys.
aLCD (liquid crystal display) (touch panel)
Touch the keys displayed on the LCD to perform
operations.
For details, refer to “LCD (Liquid Crystal Display)
Operation” (page 22).
bBack key
Press to return to the previous screen.
cPrevious page key
Displays the previous screen when there are items that
are not displayed on the LCD.
dNext page key
Displays the next screen when there are items that are
not displayed on the LCD.
eMemory key /
Press to store patterns in the machine’s memory.
fEmbroidery key /
Press this key to display the pattern type selection
screen.
gSettings key /
Press to display the settings screen.
hHelp key /
Press to get help on using the machine.
Displays simple explanations of setting upper thread /
bobbin winding / setting bobbin thread / embroidery
unit attachment / embroidery frame attachment /
embroidery foot attachment / needle replacement.
52
4
3
1
67
8
7
52
4
3
1
8
6

14
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

1 GETTING READY
The various preparations to start embroidering are described in this chapter.
Embroidery step by step ..........................................................................................16
Attaching the Embroidery Unit................................................................................17
Embroidery unit precautions ..............................................................................17
Attaching the embroidery unit ...........................................................................17
Removing the embroidery unit...........................................................................19
Turning the Machine On/Off ..................................................................................20
Power supply precautions ..................................................................................20
Turning on the machine .....................................................................................21
Turning off the machine .....................................................................................21
LCD (Liquid Crystal Display) Operation..................................................................22
Viewing the LCD ................................................................................................22
Changing the machine settings...........................................................................23
Checking machine operating procedures ...........................................................25
Winding/Installing the Bobbin.................................................................................26
Bobbin precautions ............................................................................................26
Winding the bobbin ...........................................................................................26
Installing the bobbin ..........................................................................................29
Upper Threading .....................................................................................................31
About the spool of thread ..................................................................................31
Threading the upper thread................................................................................32
Threading the needle..........................................................................................34
Threading the needle manually (without using the needle threader)..................36
Replacing the Needle ..............................................................................................37
Needle precautions ............................................................................................37
Checking the needle...........................................................................................38
Replacing the needle ..........................................................................................38

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
16
Embroidery step by step
The basic steps for embroidery are as follows.
1Attaching the
embroidery unit
Attach the embroidery unit. (If the embroidery unit is not attached, the
machine does not operate.)
For details, refer to “Attaching the embroidery unit” (page 17).
2Checking the needle Use an embroidery needle matched to the fabric. For details on replacing the needle, refer to “Replacing the needle” (page
38).
3Setting up the
bobbin thread
For the bobbin thread, wind poly 90 weight bobbin thread and set it in
place.
For details on setting up the bobbin thread, refer to “Winding/Installing
the Bobbin” (page 26).
4Preparing the fabric Attach a stabilizer material to the fabric, and hoop it in an embroidery frame.
For details, refer to “Preparing the Fabric” (page 44).
5Attaching the
embroidery frame
Attach the embroidery frame to the embroidery unit.
For details on attaching the embroidery frame, refer to “Attaching the
Embroidery Frame” (page 48).
6Selecting a pattern Select an embroidery pattern.
For details, refer to “Selecting Embroidery Patterns” (page 50).
7Checking the layout Check and adjust the size and position of the embroidery pattern. For details on adjusting the layout, refer to “Adjusting the layout” (page
62).
8Setting up the
embroidery thread Set up embroidery thread according to the pattern. For details, refer to “Upper Threading” (page 31).

Attaching the Embroidery Unit 17
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Attaching the Embroidery Unit
This section describes how to attach the embroidery unit. Before turning on the machine, attach the
embroidery unit to it. If the embroidery unit is not attached, the machine does not operate.
Embroidery unit precautions
Cautions for the embroidery unit will be explained
below.
CAUTION
Note
zDo not touch the connector in the
embroidery unit connector slot. The
connector could be damaged, and it may
cause malfunctions.
zDo not lift up on the embroidery carriage,
and do not forcefully move it. It may cause
malfunctions.
Attaching the embroidery unit
Get the included embroidery unit ready.
aTurn off the machine.
bSlide the embroidery unit onto the machine
arm.
Push it in until it clicks and stops.
XThe embroidery unit is attached.
cTurn on the machine.
XThe confirmation message is displayed.
●Do not move the machine with the
embroidery unit in place. The embroidery
unit may be dropped and cause injury.
●Keep your hands and other objects away
from the embroidery carriage and frame.
Otherwise injury may result.

GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
18
dBe sure that no objects or hands are near the
embroidery unit and press .
• When an animation is displayed on the
screen, the message above will be displayed
if you touch the screen with your finger.
XThe carriage moves to its initial position.
aCarriage
CAUTION
Note
zIf the machine is initialized with hands or
objects near the carriage, the screen may
return to the initial display. After removing
whatever is near the carriage, turn the power
on again.
XThe screen for selecting the embroidery
pattern type is displayed.
• For details on the embroidery patterns, refer
to “Selecting Embroidery Patterns” (page 50).
●Do not put your hands or other objects
near the carriage. It may cause injury.
a