Baby Love AURA LX7070 Series User manual

AURA
HI LO HIGHCHAIR
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Series LX7070
INSTRUCTION BOOK
www.babylove.com.au

ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS.
READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE
OF THIS HIGHCHAIR.
THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS
ESSENTIAL.
WARNING: THE CHILD SHOULD BE SECURED IN THE
HIGHCHAIR AT ALL TIMES BY THE HARNESS, EITHER IN THE
RECLINING OR UPRIGHT POSITION. THE TRAY IS NOT
DESIGNED TO HOLD THE CHILD IN THE CHAIR. IT IS
RECOMMENDED THAT THE HIGHCHAIR BE USED IN THE
UPRIGHT POSITION ONLY BY CHILDREN CAPABLE OF RELIABLY
AND CONSISTENTLY SITTING UPRIGHT UNASSISTED.
WARNINGS: TO PREVENT SERIOUS INJURY OR
DEATH:
• FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
• DO NOT LEAVE CHILDREN UNATTENDED.
• THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED.
- MOST INJURIES FROM THE HIGHCHAIR ARE CAUSED BY FALLS.
• POSITION THE HIGHCHAIR AWAY FROM SOLID STRUCTURES AND
BENCHES TO AVOID INJURIES CAUSED BY FALLS AND ACCESS TO
DANGEROUS ITEMS.
• Double check assembly before placing child into highchair.
• The weight of the child using this product is not to exceed 15kg.
• Always keep your child in view whilst using the highchair.
• Always apply the brakes when not moving the highchair.
• Do not allow children to stand on the seat.
• Use on a flat , even and horizontal floor and never use near stairs.
• Do not elevate the highchair on any structure or table.
• Do not allow child to stand on the seat.
WARNINGS
02 www.babylove.com.au

• Never carry the highchair with the child in it.
• Do not use the highchair without the tray and always ensure the
tray is secure on the arm rests. The tray is not designed to hold
the child in the chair.
• When making adjustments to the highchair, ensure that you and
Your child’s body, fingers and toes are clear of any moving parts
on the highchair, otherwise they may be injured.
• Position the high chair away from furniture, walls, hot surfaces
and liquids, window covering cords, electrical cords and position
the highchair away from furniture when the chair is not being
used at a table.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.
WARNINGS:
WARNINGS
03 www.babylove.com.au

A1 x Leg Tube Set B1 x U-shaped base frame
with rear castors attached
C1 x Seat Assembly
with footrest
D1 x Main Tray Assembly
www.babylove.com.au
PARTS LIST
04

05
E1 x Removable Tray
www.babylove.com.au
PARTS LIST

06
A Remove all parts from the box and layout on a flat surface.
Align the U-shaped base frame tubes with the plastic mouldings on the
leg tube set.
CInsert the base frame tubes into the plastic mouldings of the leg tube
set. Ensure the locking pins on the base frame tubes have engaged
into the holes on each of the plastic mouldings so the base frame is
securely attached.
www.babylove.com.au
1. TO ASSEMBLE THE HIGHCHAIR

07
D To install the seat assembly, align the adaptors on both sides of the
seat assembly with the receivers on the legs. Lower the seat assembly
until it engages into the receivers on both legs of the highchair. Ensure
the seat assembly is securely connected by pulling upwards.
www.babylove.com.au
1. TO ASSEMBLE THE HIGHCHAIR

08
WARNING: ALWAYS APPLY THE BRAKES EXCEPT
WHEN MOVING THE HIGHCHAIR.
A Press the brake lever down on the wheel assemblies to lock the brakes.
B Push the brake lever up on the wheel assemblies to unlock the brakes.
Please Note: The brakes should always be applied to the rear wheels
when a child is seated in the highchair and the wheels should only be
unlocked when moving the highchair.
www.babylove.com.au
2. TO APPLY THE BRAKES

09
www.babylove.com.au
3. TO SECURE YOUR CHILD IN THE
HARNESS
WARNING: USE THE HARNESS AT ALL TIMES.
AA five point harness is provided to restrain your child.
To secure your child in the harness please follow the steps below
carefully.
Push buckle (A) and (B) into the buckle housing (C) until the buckle
prongs snap into position.
Carefully adjust the harness by pulling the slider (D) until the desired fit
is achieved in the lap, shoulder and crotch straps.
Always adjust the harness when changing the seating position of the
child.
To remove the child, release the buckle by squeezing the top and
bottom prongs, remove the shoulder straps and lift the child out of the
highchair.

10 www.babylove.com.au
B The highchair seat has 2 harness slots at different heights to
accommodate the child. The shoulder straps must be positioned near
the child’s shoulders. To change the shoulder harness height, unclip the
shoulder harness straps from the waist harness straps and push the
shoulder harness tongue out of the current harness slot and through
the back of the seat pad and then pull the shoulder harness buckle
tongue through the desired slot. Clip the shoulder harness straps and
waist straps back together.
3. TO SECURE YOUR CHILD IN THE
HARNESS

11
www.babylove.com.au
AAlign and insert the metal tubes on the two sides of the tray
with the holes on the arm bar of the seat. Push the tray in until it
locks in. Pull on the tray to ensure it is securely locked into place.
WARNING: THETRAY IS NOT DESIGNEDTO HOLD
THE CHILD IN THE HIGHCHAIR. THE CHILD IS TO BE SECURED
BY THE SAFETY HARNESS AT ALL TIMES WHILE IN THE
HIGHCHAIR.
CAUTION: Ensure the child’s hands are free from moving parts when
the tray is being attached or removed to avoid pinching or
entrapment.
4. TO ATTACH AND USE THE TRAY

12 www.babylove.com.au
B There are two tray positions. To adjust the tray, press and hold the
latches under the tray and pull it towards you or push the tray in.
4. TO ATTACH AND USE THE TRAY

13
www.babylove.com.au
CThe main tray features a removable second tray for convenient
cleaning. To use the second tray, place the tray on top of the main tray
ensuring the small rib openings on both sides of the second tray lock
onto the small ribs on both sides of the main tray.
D To remove the main tray, press the tabs under the tray outward and
pull the tray towards you to remove from the arm bars on the seat.
4. TO ATTACH AND USE THE TRAY
D

14 www.babylove.com.au
H
D
4. TO ATTACH AND USE THE TRAY

15
www.babylove.com.au
A To adjust the leg rest, press the release buttons in on both sides of the
leg rest and raise or lower to your desired position.
5. TO ADJUST THE FOOT REST
IMPORTANT NOTE:
IF FOOT REST IS NOT VISIBLE, IT MAY HAVE BEEN FOLDED
UNDERNEATH THE SEAT ASSEMBLY DURING PACKAGING.
TO UNFOLD THE FOOT REST FROM UNDERNEATH THE SEAT
ASSEMBLY:
1. Remove the seat assembly from the frame. (See Page 19)
2. Release & rotate the foot rest from underneath the seat assembly.
3. Install the seat assembly onto the frame. (See Page 7)
A To adjust the foot rest, press the release buttons in on both sides of the
foot rest and raise or lower to your desired position.

16 www.babylove.com.au
www.babylove.com.au
ALWAYS REMOVEYOUR CHILD FROM THE HIGH CHAIR BEFORE
ADJUSTING THE HEIGHT OF THE HIGH CHAIR.
ARemove the child and tray from the highchair.
BPress in and hold each latch on each side of the plastic receivers and
lower the chair down or raise to the desired height and then release
the latches.
WARNING: DO NOT ADJUST WITH THE CHILD IN THE
CHAIR.
IMPORTANT NOTE:
6. TO ADJUST THE HEIGHT OF THE
HIGHCHAIR

17
www.babylove.com.au
A There are three recline positions. Lift and hold the recline latch located
on the back of the seat.
WARNING: DO NOT ADJUST WITH THE CHILD IN
THE CHAIR.
IMPORTANT NOTE:
ALWAYS REMOVEYOUR CHILD FROM THE HIGH CHAIR BEFORE
RECLINING THE SEAT ASSEMBLY.
7. TO RECLINE THE SEAT

www.babylove.com.au
18 www.babylove.com.au
www.babylove.com.au
B Tilt the seat back to the desired position. To raise the seat lift and hold
the recline latch and raise to the desired position.
7. TO RECLINE THE SEAT

19
www.babylove.com.au
A To remove the seat assembly, press in and hold the latches on both
receivers to release the adaptors and lift the seat assembly away from
the high chair.
IMPORTANT NOTE:
ALWAYS REMOVEYOUR CHILD FROM THE HIGH CHAIR BEFORE
REMOVING THE SEAT ASSEMBLY.
8. TO REMOVE THE SEAT ASSEMBLY

20 www.babylove.com.au
• Place the highchair on a horizontal, flat and even floor ensuring all
wheels are in contact with the floor.
• The highchair must not be placed on a table or similar surface to
elevate the child.
• The highchair is fitted with brakes on two castors. Ensure the brakes
are applied when the child is in the highchair and only release the
brakes to move the highchair.
• If pushing the highchair on carpet, be careful that the highchair is
not pushed over as the castors may not roll easily on the carpet.
• Position the highchair away from potential hazards and other
furniture or structures that the child may be able to grasp or push.
• Keep away from walls, kitchen benches, hot surfaces, hot liquids and
electrical cords.
9. TO USE THE HIGH CHAIR