Backyard Discovery WOODRIDGE ELITE User manual

Made in China
INS-1801080-A-WOODRIDGE ELITE-ENG 2-8-2022
INS-2200258-A-TIMBER RETREAT-ENG 2-8-2022
Please visit www.backyarddiscovery.com
For the most up to date assembly manual, to register your set, or to order replacement parts
Para obtener instrucciones en español, visite www.backyarddiscovery.com
MANUFACTURED BY:
Backyard Discovery
3305 Airport Drive, Pittsburg, KS 66762
800-856-4445
WARNING
Adult Assembly Required.
Not suitable for children under 36 months due to small parts.
FOR DOMESTIC USE ONLY. INTENDED FOR OUTDOOR USE.
Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: [phone]
J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: [phone]
WOODRIDGE ELITE
TIMBER RETREAT
Swing Set
Model # 1801080 & 2200258
The assembly manual must be retained
since it contains important information

General Information:
Your set has been designed and engineered for children only and for residential use only.
A maximum of 150 lbs. per child is recommended for play activities designed for individual use.
A maximum of 120 lbs. per child is recommended for play activities designed for multiple child use.
A maximum of 9 children is recommended for this swing set.
SAFE PLAY AREA DIAGRAM
Place the set on level ground, not less than 6'-7" [2 m] from any structure or obstruction such as a
fence, garage, house, overhanging branches, laundry lines, or electrical wires.
While assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and
improper assembly may result. Extra care must be taken to insure the fort is square.
The safe play area refers to a zone extending 6'-7" (2 m) beyond the play product on all sides, including the space above the play product.
Owner's Manual - Basic Setup Dimensions & Assembly Notes
Safe Play Zone
28'-10 3/16"
[8.8m]
32'-5"
[9.9m]
19'-3"
[5.9 m]
15'-8 3/16"
[4.8 m]
6'-7"
[2m]
6'-7"
[2m]
Safe play height: 18'-3 7/8" [5.6m]
Maximum fall height: 6'-10" [2.1 m]
11'-8 7/8"
[3.6 m]
6'-10"
[2.1 m]
2

Parts Identification
Wood Components
(NOT TO SCALE)
B3 - POST - W4L11178
3"x3"x70 3/8" (76x76x1786)
1)
B4 - POST - W4L11179
3"x3"x70 3/8" (76x76x1786)
1)
B5 - POST - W4L11180
3"x3"x59" (76x76x1500)
1)
E4 - UPRIGHT - W4L11181
1 3/8"x3 3/8"x70 3/8" (36x86x1786)
1)
E5 - UPRIGHT - W4L11182
1 3/8"x3 3/8"x70 3/8" (36x86x1786)
1)
E6 - UPRIGHT - W4L11183
1 3/8"x3 3/8"x41" (36x86x1040)
2)
E7 - UPRIGHT - W4L11184
1 3/8"x3 3/8"x41" (36x86x1040)
2)
F1 - UPRIGHT - W4L11185
1 3/8"x2 3/8"x37" (36x60x940)
2)
B1 - SWING BEAM - W4L09091
3"x3"x89 1/2" (76x76x2274)
1)
B2 - SWING BEAM - W4L09090
3"x3"x89 1/2" (76x76x2274)
1)
E1 - FLOOR SUPPORT - W4L09077
1 3/8"x3 3/8"x92" (36x86x2336)
1)
E2 - LADDER RAIL - W4L09100
1 3/8"x3 3/8"x89 1/4" (36x86x2266)
2)
E3 - BRACE - W4L09103
1 3/8"x3 3/8"x72 5/8" (36x86x1845)
2)
E77 - LEFT UPRIGHT - W4L11414
1 3/8"x3 3/8"x64 3/8" (36x86x1634)
1)
E78 - RIGHT UPRIGHT - W4L11415
1 3/8"x3 3/8"x64 3/8" (36x86x1634)
1)
B6 - POST - W2A02493
3"x3"x59" (76x76x1500)
1)
3

Parts Identification
Wood Components
(NOT TO SCALE)
F5 - BRACE - W4L11187
1 3/8"x2 3/8"x18 1/8" (36x60x460)
3)
G6 - FLOOR JOIST - W4L11188
1"x5 1/4"x49 1/2" (24x134x1256)
1)
H4 - FLOOR SUPPORT - W4L11190
1"x3 3/8"x74 3/8" (24x86x1890)
1)
F4 - UPRIGHT - W4L09063
1 3/8"x2 3/8"x23 1/8" (36x60x586)
2)
G1 - GROUND BOARD - W4L09084
1"x5 1/4"x90 1/8" (24x134x2288)
2)
G2 - GROUND BOARD - W4L09104
1"x5 1/4"x89 1/2" (24x134x2274)
1)
G3 - GROUND BOARD - W4L09087
1"x5 1/4"x78 1/4" (24x134x1987)
1)
G4 - GROUND BOARD - W4L09086
1"x5 1/4"x78 1/4" (24x134x1987)
1)
G5 - GROUND BOARD - W4L09089
1"x5 1/4"x51 1/8" (24x134x1298)
1)
G7 - SEAT - W4L11189
1"x5 1/4"x49 7/8" (24x134x1266)
1)
H1 - FLOOR SUPPORT - W4L09076
1"x3 3/8"x90 1/8" (24x86x2288)
1)
H2 - FLOOR SUPPORT - W4L09066
1"x3 3/8"x75 3/8" (24x86x1914)
1)
H3 - FLOOR SUPPORT - W4L09078
1"x3 3/8"x75 3/8" (24x86x1914)
1)
F2 - UPRIGHT - W4L11186
1 3/8"x2 3/8"x37" (36x60x940)
2)
F3 - UPRIGHT - W4L09093
1 3/8"x2 3/8"x28 1/4" (36x60x716)
2)
F6 - BRACE - W4L11632
1 3/8"x2 3/8"x18 1/8" (36x60x460)
2)
4

Parts Identification
Wood Components
(NOT TO SCALE)
H11 - ROOF RAFTER - W4L11192
1"x3 3/8"x43 7/8" (24x86x1114)
4)
H14 - FLOOR SUPPORT - W4L11193
1"x3 3/8"x35 3/8" (24x86x898)
1)
H15 - FLOOR JOIST - W4L11194
1"x3 3/8"x35 3/8" (24x86x898)
3)
H8 - FLOOR SUPPORT - W4L09064
1"x3 3/8"x53" (24x86x1346)
1)
H9 - FLOOR SUPPORT - W4L09072
1"x3 3/8"x53" (24x86x1346)
1)
H10 - SUPPORT BOARD - W4L09062
1"x3 3/8"x53" (24x86x1346)
1)
H12 - WALL RAIL - W4L09057
1"x3 3/8"x38 3/4" (24x86x983)
1)
H13 - WALL RAIL - W4L09049
1"x3 3/8"x36 1/4" (24x86x922)
1)
H16 - WALL RAIL - W4L09053
1"x3 3/8"x26 1/4" (24x86x668)
1)
H17 - WALL RAIL - W4L09052
1"x3 3/8"x23 3/4" (24x86x604)
1)
H18 - SEAT - W4L11195
1"x3 3/8"x49 7/8" (24x86x1266)
1)
H19 - SUPPORT BOARD - W4L11196
1"x3 3/8"x5 1/4" (24x86x132)
1)
H20 - WALL RAIL - W4L09051
1"x3 3/8"x92" (24x86x2336)
1)
H21 - ANGLE BRACE - W4L11112
1"x3 3/8"x47 1/4" (24x86x1201)
2)
H5 - FLOOR SUPPORT - W4L09073
1"x3 3/8"x53 3/4" (24x86x1366)
2)
H6 - FLOOR JOIST - W4L11191
1"x3 3/8"x53 3/4" (24x86x1366)
2)
H7 - FLOOR SUPPORT - W4L09069
1"x3 3/8"x53 3/4" (24x86x1366)
1)
5

Parts Identification
Wood Components
(NOT TO SCALE)
J1 - PORCH RAFTER - W4L11197
1"x2 3/8"x38 1/8" (24x60x969)
2)
K1 - DOUBLE ARCHED RAIL - W4L09079
5/8"x5 1/4"x90 1/8" (16x134x2288)
1)
K2 - WALL RAIL - W4L09060
5/8"x5 1/4"x55 5/8" (16x134x1414)
1)
K3 - ARCHED RAIL - W4L09047
5/8"x5 1/4"x55 5/8" (16x134x1414)
1)
K4 - ARCHED RAIL - W4L09045
5/8"x5 1/4"x55 5/8" (16x134x1414)
1)
K5 - WALL RAIL - W4L09061
5/8"x5 1/4"x54 1/4" (16x134x1378)
1)
K6 - ARCHED RAIL - W4L09046
5/8"x5 1/4"x54 1/4" (16x134x1378)
1)
K7 - ARCHED RAIL - W4L09048
5/8"x5 1/4"x54 1/4" (16x134x1378)
1)
H76 - LADDER RUNG - W4L06609
1"x3 3/8"x18 1/8" (24x86x460)
5)
H22 - WALL RAIL - W4L09050
1"x3 3/8"x78" (24x86x1982)
1)
H23 - SUPPORT BOARD - W4L11452
1"x3 3/8"x6 1/4" (24x86x160)
2)
H24 - FLOOR JOIST - W4L11451
1"x3 3/8"x53 3/4" (24x86x1366)
1)
J2 - SAFETY RAIL - W4L09075
1"x2 3/8"x52 1/4" (24x60x1326)
1)
J3 - SAFETY RAIL - W4L09065
1"x2 3/8"x50 1/2" (24x60x1282)
1)
J4 - SAFETY RAIL - W4L09074
1"x2 3/8"x52" (24x60x1322)
1)
J5 - SAFETY RAIL - W4L09070
1"x2 3/8"x53 3/4" (24x60x1366)
1)
6

Parts Identification
Wood Components
(NOT TO SCALE)
K14 - WALL RAIL - W4L09068
5/8"x5 1/4"x11 5/8" (16x134x294)
1)
K15 - WALL RAIL - W4L09067
5/8"x5 1/4"x11 5/8" (16x134x294)
1)
K16 - SAFETY RAIL - W4L11199
5/8"x5 1/4"x16 7/8" (16x134x430)
1)
K91 - GABLE BOARD - W4L11200
3/8"x3 3/8"x49 5/8" (11x86x1260)
2)
K92 - GABLE BOARD - W4L11201
3/8"x3 3/8"x43 1/4" (11x86x1098)
2)
K93 - GABLE BOARD - W4L11202
3/8"x3 3/8"x36 7/8" (11x86x936)
2)
K94 - GABLE BOARD - W4L11203
3/8"x3 3/8"x30 1/2" (11x86x774)
2)
K95 - GABLE BOARD - W4L11204
3/8"x3 3/8"x24 1/8" (11x86x612)
2)
K96 - GABLE BOARD - W4L11205
3/8"x3 3/8"x17 3/4" (11x86x450)
2)
K8 - WALL RAIL - W4L09097
5/8"x5 1/4"x27 1/8" (16x134x690)
2)
K9 - WALL RAIL - W4L09096
5/8"x5 1/4"x26 7/8" (16x134x682)
2)
K10 - ARCHED RAIL - W4L09094
5/8"x5 1/4"x25 7/8" (16x134x658)
2)
K11 - ARCHED RAIL - W4L09098
5/8"x5 1/4"x25 7/8" (16x134x658)
1)
K12 - FLOOR BOARD - W4L11198
5/8"x5 1/4"x23 1/8" (16x134x586)
1)
K13 - WALL RAIL - W4L09071
5/8"x5 1/4"x14 1/8" (16x134x360)
2)
7

Parts Identification
Wood Components
(NOT TO SCALE)
L5 - WALL BOARD - W4L11212
5/8"x4 3/8"x36" (16x112x914)
2)
L6 - CORNER BOARD - W4L11111
5/8"x4 3/8"x31" (16x112x788)
1)
L7 - CORNER BOARD - W4L11213
5/8"x4 3/8"x31" (16x112x788)
1)
L8 - CORNER BOARD - W4L11214
5/8"x4 3/8"x31" (16x112x788)
1)
L9 - CORNER BOARD - W4L11215
5/8"x4 3/8"x31" (16x112x788)
2)
L10 - WALL BOARD - W4L11216
5/8"x4 3/8"x23 3/4" (16x112x602)
4)
L11 - WALL BOARD - W4L11217
5/8"x4 3/8"x20 3/8" (16x112x518)
1)
L12 - CORNER BOARD - W4L11218
5/8"x4 3/8"x41 1/2" (16x112x1055)
1)
M2 - WALL RAIL - W4L09088
5/8"x3 3/8"x90 1/8" (16x86x2288)
2)
K97 - GABLE BOARD - W4L11206
3/8"x3 3/8"x11 3/8" (11x86x288)
2)
K98 - GABLE BOARD - W4L11207
3/8"x3 3/8"x5" (11x86x126)
2)
L1 - WALL BOARD - W4L11208
5/8"x4 3/8"x54 1/4" (16x112x1378)
1)
L2 - WALL BOARD - W4L11209
5/8"x4 3/8"x45 1/8" (16x112x1146)
2)
L3 - CORNER BOARD - W4L11210
5/8"x4 3/8"x41 1/2" (16x112x1055)
1)
L4 - WALL BOARD - W4L11211
5/8"x4 3/8"x41 1/8" (16x112x1044)
2)
8

Parts Identification
Wood Components
(NOT TO SCALE)
M10 - WALL BOARD - W4L11223
5/8"x3 3/8"x41 1/8" (16x86x1044)
2)
M11 - WALL RAIL - W4L09055
5/8"x3 3/8"x39 7/8" (16x86x1012)
1)
M12 - WALL BOARD - W4L11224
5/8"x3 3/8"x36" (16x86x914)
6)
M13 - WALL BOARD - W4L11225
5/8"x3 3/8"x36" (16x86x914)
20)
M14 - WALL BOARD - W4L11226
5/8"x3 3/8"x31" (16x86x788)
2)
M15 - WALL BOARD - W4L11227
5/8"x3 3/8"x31" (16x86x788)
2)
M16 - WALL RAIL - W4L09092
5/8"x3 3/8"x27 3/4" (16x86x706)
4)
M17 - WALL RAIL - W4L09095
5/8"x3 3/8"x26 7/8" (16x86x682)
2)
M18 - FLOOR BOARD - W4L11228
5/8"x3 3/8"x24 3/4" (16x86x628)
16)
M19 - FLOOR BOARD - W4L11229
5/8"x3 3/8"x23 1/8" (16x86x586)
24)
M20 - FLOOR BOARD - W4L11230
5/8"x3 3/8"x23 1/8" (16x86x586)
1)
M4 - FLOOR BOARD - W4L11219
5/8"x3 3/8"x76 3/4" (16x86x1950)
11)
M5 - FLOOR BOARD - W4L11220
5/8"x3 3/8"x53" (16x86x1346)
14)
M6 - FLOOR BOARD - W4L11221
5/8"x3 3/8"x53" (16x86x1346)
16)
M7 - WALL RAIL - W4L09054
5/8"x3 3/8"x63 1/4" (16x86x1608)
1)
M8 - WALL RAIL - W4L09085
5/8"x3 3/8"x51 3/4" (16x86x1314)
4)
M9 - WALL BOARD - W4L11222
5/8"x3 3/8"x45 1/8" (16x86x1146)
2)
9

Parts Identification
Wood Components
(NOT TO SCALE)
M27 - WALL RAIL - W4L09083
5/8"x3 3/8"x10 3/4" (16x86x274)
1)
M28 - CLEAT - W4L11232
5/8"x3 3/8"x5 1/4" (16x86x132)
2)
M47 - PICKET - 51 - W4L11233
5/8"x3 3/8"x25 1/4" (16x86x640)
6)
M49 - PICKET - 53 - W4L11234
5/8"x3 3/8"x20 3/8" (16x86x518)
53)
M73 - REAR SUPPORT - W4L11417
5/8"x3 3/8"x20 1/8" (16x86x512)
1)
M110 - ATTACHMENT BOARD - W4L11450
5/8"x3 3/8"x20 1/8" (16x86x512)
1)
N1 - WALL BOARD - W4L11235
5/8"x2 3/8"x32" (16x60x812)
1)
N2 - WINDOW TRIM - W4L09059
5/8"x2 3/8"x30" (16x60x761)
1)
N3 - WINDOW TRIM - W4L09081
5/8"x2 3/8"x22 1/2" (16x60x570)
1)
N4 - WINDOW TRIM - W4L09080
5/8"x2 3/8"x19 7/8" (16x60x504)
2)
N5 - WINDOW TRIM - W4L09058
5/8"x2 3/8"x14" (16x60x356)
2)
N6 - WALL BOARD - W4L11236
5/8"x2 3/8"x10 3/8" (16x60x264)
2)
M26 - WALL RAIL - W4L09082
5/8"x3 3/8"x11 1/8" (16x86x284)
1)
M25 - WALL BOARD - W4L11231
5/8"x3 3/8"x14 1/4" (16x86x362)
5)
M24 - WALL RAIL - W4L09056
5/8"x3 3/8"x16" (16x86x406)
1)
M23 - LADDER RUNG - W4L09099
5/8"x3 3/8"x16 7/8" (16x86x429)
1)
M22 - LADDER RUNG - W4L09101
5/8"x3 3/8"x22 1/2" (16x86x572)
11)
M21 - LADDER RUNG - W4L09102
5/8"x3 3/8"x22 1/2" (16x86x572)
1)
10

Parts Identification
Wood Components
(NOT TO SCALE)
Y1 - FLOOR BOARD - W4L11239
5/8"x4"x45 1/8" (16x102x1146)
1)
2) RP1 - PEAK ROOF PANEL - W2A02287
1 5/8"x15 5/8"x60 7/8" (42x396x1546)
3) RP2 - ROOF PANEL - W2A02288
1 5/8"x15 5/8"x60 7/8" (42x396x1546)
1) RP3 - PORCH PANEL - W2A02289
1 5/8"x20 5/8"x60 7/8" (42x524x1546)
1) RP4 - PORCH PANEL - W2A02290
1 5/8"x15 5/8"x60 7/8" (42x396x1546)
1) RP5 - ROOF PANEL - W2A02291
1 5/8"x15 5/8"x60 7/8" (42x396x1546)
O5 - CLEAT - W4L11237
5/8"x1 3/8"x36 7/8" (16x34x936)
2)
O6 - CLEAT - W4L11238
5/8"x1 3/8"x26 3/4" (16x34x680)
1)
O70 - SLIDE MOUNTING BOARD - W4L09040
5/8"x1 3/8"x20 3/8" (16x34x517)
1)
11

Parts Identification
Hardware
- WASHER LOCK INT 10x18 SD - H100708
(13)
- WASHER LOCK INT 8x15 SD - H100710
(24)
- WASHER LOCK EXT 8x19 SD - H100554
(197)
- WASHER LOCK EXT 12x19 SD - H100707
(24)
- BOLT WH 5/16x1/2 SD - H100675
(13)
- WASHER FLAT 11x25 SD - H100703
(13)
- BOLT WH 5/16x4 1/2 SD - H100726
(8)
- BOLT WH 5/16x4-1/4 SD - H100717
(2)
- BOLT WH 5/16x3 1/2 SD - H100680
(10)
- BOLT WH 5/16x3 SD - H100679
(4)
- BOLT WH 5/16x2 1/2 SD - H100677
(4) - BOLT WH 5/16x2 1/4 SD - H100678
(23)
- BOLT WH 5/16x2 SD - H100676
(34)
- BOLT WH 5/16x1 3/4 SD - H100555
(7)
- BOLT WH 5/16x1 1/2 SD - H100673
(23)
- BOLT WH 5/16x1 1/4 SD - H100714
(28)
- BOLT WH 5/16x1 SD - H100672
(1)
- BOLT WH 5/16x3 3/4 SD - H100681
(23)
- WASHER SPLIT 5/16 SD - H100711
(4)
- WASHER FLAT 8x27 SD - H100705
(4)
- NUT BARREL WH 5/16x7/8 SD - H100693
(24)
- WASHER LOCK EXT 6x15 SD - H100546
(2)
12

Parts Identification
Hardware
- LAG SCREW WH 5/16x3 SD - H100689
(22)
- T-40 TORX BIT - A100042
(2)
- T-30 TORX WRENCH - H100114
(2)
- T-40 TORX WRENCH - A100041
(2)
- LAG SCREW WH 5/16x2 1/2 SD - H100687
(3)
- LAG SCREW WH 5/16x2 SD - H100686
(49)
- LAG SCREW WH 5/16x1 1/2 SD - H100685
(11)
- SCREW PWH 8x5/8 SD - H100544
(9)
- SCREW PFH 8x1 1/8 SD - H100540
(537)
- SCREW PFH 8x1 1/2 SD - H100538
(355)
- SCREW PFH 8x2 SD - H100542
(212)
- SCREW PFH 8x2 1/2 SD - H100695
(70)
- SCREW PFH 8x3 SD - H100723
(2)
- BOLT PTH 1/4x3/4 SD - H100670
(24)
- SCREW PFH 8x1/2 SD - H100543
(4)
- BOLT HEX 3/8x3 1/4 SD - H100727
(13)
- T-30 TORX BIT - H100147
(2)
- SCREW PFH 8x1 1/4 SD - H100539
(23)
- SCREW PFH 8x1 3/4 SD - H100541
(9)
- T-NUT 3/8 SD - H100700
(13)
- T-NUT 5/16 SD - H100556
(148)
- T-NUT 1/4 SD - H100699
(24)
- LAG SCREW WH 1/4x2 SD - H100553
(2)
- BOLT HEX 5/16x1 3/4 SD - H100674
(2)
- LAG SCREW HEX 5/16x2 SD - H100684
(2)
13

Parts Identification
Accessories
(NOT TO SCALE)
HP - MESH PANEL - A100012
(1)
EF - CHAIN GREEN 57" - A100047
(4)
KN - CHAIN GREEN 31" - A100177
(2)
JV - HAND GRIP GREEN 816 C/C - A100134
(2)
FX - HAND GRIP METAL GREEN 381 c/c - A100118
(4)
HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164
(1)
SQ - "A" REVISION TAG - A100314
(1)
- GROUND STAKE REBAR - A4M00527
(6)
- TRAPEZE - A6P00034
(1)
- GREEN HC ROCK #1 - A6P00036
(6)
TZ - L BRACKET 2.5x38x50x55 - A100340
(13)
- QUICK LINK SD - A4M00927
(6)
- GREEN HC ROCK #2 - A6P00037
(5)
(1) QU - SLIDE VF 10 FT - A100287 OR 50250
- SWING SEAT GREEN 22IN - A6P00054
(2)
- TUNNEL - A6P00273
1/8"x61 3/8"x81" (2x1558x1649)
(1)
(6) SWING HANGER - A4M00926
DD - TRIANGLE PLATE 105 5 HOLE - A100005
(2)
14

H100194 BOLT WH
5/16 x 2-1/2
(x2)
PRE-ASSEMBLY STEP 1 - SORTING PARTS
It is critical for ease of assembly that you take the time to sort and organize the wood and hardware.
WOOD PARTS:
• Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01).
• If there are multiple boards with the same stamped number, stack those pieces together.
• Stamps can be found on the flat surface of the boards or on the end of the boards.
• Allow yourself plenty of room - the wood pieces can take up a significant amount of space.
NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.
HARDWARE PARTS:
• We recommend that you have a separate table to organize the hardware.
• Hardware bags are printed with a seven-digit, alpha-numeric part number.
• You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.).
• During assembly you only need to reference the last four digits of the number.
15

PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED
Cordless Drill or
Electric Drill
Drill Attachments:
Phillips Head
Open End Wrenches 1/2" & 9/16"
Phillips Screw Driver
1/8", 3/16", 3/8" & 7/16"
Drill Bits
3/8" Drive Ratchet, 1/2" &
9/16" STD Sockets 1/2" & 9/16" Deep
Sockets
Claw Hammer Rubber Mallet - Optional
Tape Measure
Square
Level 24"
16

PRE-ASSEMBLY STEP 3 - CHOOSE YOUR ASSEMBLY METHOD
There are several types of assembly instructions available to you.
1. Printed Assembly Manual included with your set
2. BILT APP - 3D interactive instructions
3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two methods)
17

5 FOOT LADDER ASSEMBLY
STEP 1
SCREW PFH 8x2 SD
(10 PLCS)
H76
E77
E77 - LEFT UPRIGHT - W4L11414
1 3/8"x3 3/8"x64 3/8" (36x86x1634)
(1) H76 - LADDER RUNG - W4L06609
1"x3 3/8"x18 1/8" (24x86x460)
(5)
SCREW PFH
8x2 SD
(10)
18

5 FOOT LADDER ASSEMBLY
STEP 2
SCREW PFH 8x2 SD
(10 PLCS)
E78
SCREW PFH
8x2 SD
(10)
E78 - RIGHT UPRIGHT - W4L11415
1 3/8"x3 3/8"x64 3/8" (36x86x1634)
(1)
19

5 FOOT LADDER ASSEMBLY
STEP 3
SCREW PFH 8x2 SD
(8 PLCS) SCREW PFH
8x2 SD
(8)
M110
M73
M73 - REAR SUPPORT - W4L11417
5/8"x3 3/8"x20 1/8" (16x86x512)
(1) M110 - ATTACHMENT BOARD - W4L11450
5/8"x3 3/8"x20 1/8" (16x86x512)
(1)
20