Ballard Designs Patisserie Glass Serving Stand BT450 User manual

PRODUCT NAME: Patisserie Glass Serving Stand
ITEM NUMBER: BT450
ASSEMBLED DIMENSIONS: 24”H x 26”W X 7”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED 11-19-2020
MADE IN INDIA
Page 1 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 3
Ltr.
A 2 Finials
B 4
Glass Shelves (D)
Base Assemblies (C)
Qty. Hardware Included
Ltr.
D
2C
2
Qty. Components
Screws with
Rubber Tips
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alchohol based
cleaners or polishers. Promptly remove spills.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
NO TOOLS REQUIRED

Page 3 of 3
Set both Base Assemblies (C) upright and carefully slide Glass Shelves (D) over posts.
Tighten Screws (B) to secure each Glass Shelf at the desired height. Rubber tip designed
to apply non-slip pressure without damaging finish. DO NOT OVER TIGHTEN.
STEP 1:
(D)
(C)
(C)
(A)
STEP 2: Turn Finials (A) onto top of each Base Assembly (C).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com