Barska Starwatcher Specification sheet

4/17
© 2017 BARSKA®
Pomona, CA 91767 | (t) 888.666.6769 | (f) 909.445.8169 | www.barska.com
Line up the (L) main telescope optical tube
with the side mount holes on the (J) yolk
mount and secure in place using the two (D)
optical tube screws.
Secure the (O) slow motion control rod with
the included (P) control rod screw by
tightening it with the included (G)
screwdriver.
Attach (F) tripod leg screw to the extension
base on each of the (Q) tripod legs.
Attach each (Q) tripod leg to the (J) yolk
mount using the (E) leg to yolk screw sets.
Use the (H) three tripod screws on the (N)
center leg brace to connect each of the center
leg braces to the three (Q) tripod legs.
Remove the (K) knurled nuts and attach the
(I) finderscope to (L) main telescope optical
tube with the battery compartment and lens
facing the front of the telescope. Secure by
tightening the (K) knurled nuts.
Insert the barrel of the (C) diagonal into the
focuser tube on the (L) main telescope
optical tube and tighten the
set screw.
Choose one (B) eyepiece and insert the
chrome barrel of the eyepiece into the (C)
diagonal and tighten the set screw.
See reverse side for additional information.
QThree Tripod Legs
GScrewdriver
DTwo Optical
Tube Screws
E Three Leg to
Yolk Screws
FThree Tripod
Leg Screws
J Yolk Mount
MBarlow Lens
KTwo Knurled Nuts
IFinderscope
P Control Rod ScrewOSlow Motion Control Rod
LMain Telescope Optical Tube
1 2 3
4 5 6
7 8 9
CAUTION: DO NOT LOOK DIRECTLY AT THE SUN.
VIEWING THE SUN OR ANY LIGHT SOURCE WITH THIS
OPTICAL DEVICE CAN CAUSE PERMANENT EYE DAMAGE.
Assembly
Starwatcher Telescope Quick Set Up - 70070, 525 Power
NAccessory Tray / Center Leg Brace
Parts Included
AThree Eyepiece
Containers
B Three Eyepieces
CDiagonal
BC528
HThree Tripod
Screws
Insert the (O) slow motion control rod into
the hole on the (J) yolk mount.

CAUTION: DO NOT LOOK DIRECTLY AT THE SUN.
VIEWING THE SUN OR ANY LIGHT SOURCE WITH THIS
OPTICAL DEVICE CAN CAUSE PERMANENT EYE DAMAGE.
Starwatcher Telescope Quick Set Up - 70070, 525 Power
10
Insert the Barlow lens (M) into the rear side
of Diagonal (C) and tighten the thumb
screw on the diagonal.
4/17
© 2017 BARSKA®
Pomona, CA 91767 | (t) 888.666.6769 | (f) 909.445.8169 | www.barska.com
BC528
Eyepiece
▼
Barlow Lens
▼
Diagonal