Bauer BG 25 User manual
Instruction Manual
BG 25
BAUER Maschinen GmbH
P.O. Box 12 60 D-86522 Schrobenhausen Germany
Phone: +49 8252 97-0 Fax: +49 8252 97-13 59
BK000513.wmf
Translation of the original instruction manual
Keep this manual also for future use!
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
I
PREFACE
US
UK
If you are not familiar with the language used in this operating manual you
must not operate the equipment. If you cannot read this operating manual or
understand its contents, you must contact the customer service department of
BAUER Maschinen GmbH and order a manual in a language you understand.
Telephone +49 8252 97-2586
Fax +49 8252 97-2587
E-Mail KVT@bauer.de
BG
BAUER Maschinen GmbH
+49 8252 97-2586
+49 8252 97-2587
E-Mail KVT@bauer.de
CN
如果您无法理解该操作手册所使用语言，禁止运行该设备/机器。请联系 BAUER
Maschinen GmbH 客户服务部，订购您所能够理解的语言版本的操作手册。
电话 +49 8252 97-2586
传真 +49 8252 97-2587
电子邮件 KVT@bauer.de
CZ
chinen GmbH a objednejte si návod k obsluze v ja-
zyce, který je pro vás srozumitelný.
Telefon +49 8252 97-2586
Telefax +49 8252 97-2587
E-Mail KVT@bauer.de
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
II
DE
Sollten Sie die in dieser Betriebsanleitung verwendete Sprache nicht verste-
hen, darf das Gerät / die Anlage von Ihnen nicht in Betrieb genommen wer-
den. Kontaktieren Sie bitte in so einem Fall den Kundendienst der BAUER
Maschinen GmbH und bestellen Sie eine Betriebsanleitung in einer für Sie
verständlichen Sprache.
Telefon +49 8252 97-2586
Telefax +49 8252 97-2587
E-Mail KVT@bauer.de
DK
Hvis du ikke forstår sproget, der er brugt i denne betjeningsvejledning, må du
ikke tage udstyret/anlægget i brug. Kontakt i dette tilfælde kundeservice hos
BAUER Maschinen GmbH, og bestil en brugsanvisning på et sprog, som du
forstår.
Telefon +49 8252 97-2586
Fax +49 8252 97-2587
E-Mail KVT@bauer.de
ES
En caso de no comprender el idioma utilizado en el presente manual de usua-
rio, no podrá poner en funcionamiento el aparato / equipo. En ese caso,
póngase por favor en contacto con el servicio de atención al cliente de BAU-
ER Maschinen GmbH y solicite un manual de instrucciones que esté en su
idioma.
Teléfono +49 8252 97-2586
Fax +49 8252 97-2587
E-Mail KVT@bauer.de
EE
Kui see kasutusjuhendis on keeles, mida te ei oska, on teile selle masi-
na/seadme kasutamine keelatud. Palun võtke sellisel juhul ühendust BAUER
Maschinen GmbH klienditeenindusega ja tellige endale kasutusjuhend, mis on
teile arusaadavas keeles.
Telefon +49 8252 97-2586
Faks +49 8252 97-2587
E-post KVT@bauer.de
FI
Jos et ymmärrä tässä käyttöohjeessa käytettyä kieltä, et saa ottaa laitetta /
laitteistoa käyttöön. Ota tässä tapauksessa yhteyttä BAUER Maschinen
GmbH -yhtiön asiakaspalveluun ja tilaa sieltä sellainen käyttöohje, jonka kieltä
ymmärrät.
Puhelin +49 8252 97-2586
Faksi +49 8252 97-2587
Sähköposti KVT@bauer.de
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
III
FR
Si vous ne comprenez pas la langue utilisée dans ce manuel d'instructions,
vous ne devez pas mettre en service l'appareil/l'installation. Dans ce cas,
veuillez contacter le service après -vente de BAUER Maschinen GmbH et
commandez u manuel d'utilisation rédigé dans une langue compréhensibles
pour vous.
Téléphone +49 8252 97-2586
Télécopie +49 8252 97-2587
E-Mail KVT@bauer.de
GR
+49 8252 97-2586
+49 8252 97-2587
E-Mail KVT@bauer.de
HR
o-
rabu na jeziku koji razumijete.
Telefon +49 8252 97-2586
Telefaks +49 8252 97-2587
E- KVT@bauer.de
HU
Amennyiben nem érti a jelen használati útmutató nyelvét, akkor nem helyez-
heti üzembe a készüléket / berendezést. Ezért ilyen esetben lépjen kapcsolat-
ba a BAUER Maschinen GmbH ügyfélszolgálatával és rendelje meg a
használati útmutatót olyan nyelven, amelyet megért.
Telefon +49 8252 97-2586
Fax +49 8252 97-2587
E-Mail KVT@bauer.de
IT
Se non si comprende la lingua utilizzata in queste istruzioni d'uso, non è con-
sentito mettere in funzione l'apparecchio / l'impianto. In questo caso, contat-
tando il Servizio Assistenza BAUER Maschinen GmbH, è possibile ordinare le
istruzioni d'uso in una lingua a scelta.
Telefono +49 8252 97-2586
Telefax +49 8252 97-2587
E-Mail KVT@bauer.de
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
IV
LU
Falls Dir d'Sprooch déi an dëser Betribsuleedung benotzt gëtt net verstitt,
dann dierft Dir den Apparat / d'Anlag net a Betrib huelen. Kontaktéiert an esou
engem Fall de Konnendéngscht vun der BAUER Maschinen GmbH a bestellt
eng Betribsuleedung an enger Sprooch déi Dir verstitt.
Telefon +49 8252 97-2586
Telefax +49 8252 97-2587
E-Mail KVT@bauer.de
LV
es ar fir-
+49 8252 97-2586
Fakss +49 8252 97-2587
E-pasts KVT@bauer.de
MT
Jekk mintix familjari mal--n-
-apparat. Jekk ma tistax taqra dan il-
jew inkella jekk ma tistax tifhem il--
dipartiment tas-servizz tal-klijenti ta
tordna manwal f'lingwa li tifhem.
Telefon +49 8252 97-2586
Fax +49 8252 97-2587
E-Mail KVT@bauer.de
NL
Als u de taal van deze gebruiksaanwijzing niet machtig bent, mag het appa-
raat / de installatie niet door u in gebruik genomen worden. Neemt u s.v.p. in
dat geval contact op met de klantenservice van BAUER Maschinen GmbH en
bestel daar een gebruiksaanwijzing in een voor u verstaanbare taal.
Telefoon +49 8252 97-2586
Fax +49 8252 97-2587
E-Mail KVT@bauer.de
NO
Dersom du ikke frostår det språket som brukes i denne bruksanvisningen, må
du ikke betjene apparatet/anlegget. Ta i så fall kontakt med kundeservice hos
BAUER Maschinen GmbH og bestill en bruksanvisning på et språk du forstår.
Telefon +49 8252 97-2586
Telefaks +49 8252 97-2587
E-post KVT@bauer.de
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
V
PL
b-
y-
Telefon +49 8252 97-2586
Telefaks +49 8252 97-2587
E-Mail KVT@bauer.de
PT
Se não entender o idioma utilizado neste manual de instruções, não pode
colocar a máquina/unidade em funcionamento. Neste caso, contacte o servi-
ço de assistência da BAUER Maschinen GmbH e encomende um manual
num idioma que entenda.
Telefone +49 8252 97-2586
Fax +49 8252 97-2587
E-Mail KVT@bauer.de
RO
serviciul pea-
Telefon +49 8252 97-2586
Telefax +49 8252 97-2587
E-Mail KVT@bauer.de
RU
BAUER
Maschinen GmbH
+49 8252 97-2586
+49 8252 97-2587
E-Mail KVT@bauer.de
SE
Förstår du inte språket i den här bruksanvisningen får du inte använda appa-
raten/anläggningen. Kontakta i så fall BAUER Maschinen GmbHs kundtjänst
och beställ en bruksanvisning på ett språk du förstår.
Telefon +49 8252 97-2586
Telefax +49 8252 97-2587
E-Mail KVT@bauer.de
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
VI
SK
Ak by ste nerozumeli jazyku, v ktorom je napísaný tento návod na obsluhu,
n-
d-
najte si návod na obsluhu v jazyku, ktorému rozumiete.
Telefón +49 8252 97-2586
Fax +49 8252 97-2587
Email KVT@bauer.de
SI
navodila za uporabo v
jeziku, ki ga razumete.
Telefon +49 8252 97-2586
Telefaks +49 8252 97-2587
E- KVT@bauer.de
TR
Telefon +49 8252 97-2586
Telefaks +49 8252 97-2587
E-Mail KVT@bauer.de
UA
BAUER Maschinen
GmbH
+49 8252 97-2586
+49 8252 97-2587
E-Mail KVT@bauer.de
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
VII
This Instruction Manual is written for use by operating and maintenance personnel.
Before the first use of this equipment PLEASE
First, take your time and read the "Instruction Manual" and the en-
closed booklet entitled "Safety Information".
These two documents shall always be kept at the equipment to be accessible for review
at any time.
The "Instruction Manual" gives you a detailed description of the equipment, guidelines
for transport and initial start-up as well as comprehensive instructions for the operation
of the equipment, trouble shooting tips and information related to maintenance.
Technical data, weights and measurements are accurate as of the day this Instruction
Manual is printed. Due to the continuous technical advancements made, there may be
minor deviations between the technical data, weights and measurements contained in
the Instruction Manual and the equipment as actually built and delivered. These minor
deviations are, however, inconsequential and do not change in any material way nor do
they invalidate the contents of this Instruction Manual.
The equipment as delivered to you may have options that might not be pictured in the
photographs or described in the text contained in this Instruction Manual exactly as they
appear on your equipment. This is due to the individualization of the equipment based
on the wishes and orders of the individual customers and no claims of any kind shall be
based on such deviations.
The equipment shall only be used for the authorized purposes listed in the Instruction
Manual. The manufacturer shall have no liability whatsoever for the improper or
unauthorized use of the equipment, operator errors or mistakes or improper respective-
ly insufficient maintenance.
The enclosed booklet entitled "Safety Information" contains the directions and related
information for the safe use of the equipment. The "Safety Information" must be fol-
lowed at all times.
Also, pay attention to and follow all the instructions contained in the attached docu-
ments (Appendix ___) of the component manufacturers.
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
VIII
The "Instruction Manual" was written and published by
BAUER Maschinen GmbH Postfach 12 60 D-86522 Schrobenhausen, Germany
Copyright 2009, BAUER Maschinen GmbH
The information contained in this manual and/or any of its parts, sub-parts or chapters,
is the intellectual property of BAUER Maschinen GmbH and is protected by domestic
and international copyright and other intellectual property laws.
The information contained herein is provided for the operation, service, maintenance
and troubleshooting of the equipment described herein.
Any duplication, reproduction, translation, micro filming, storage in electronic or mag-
netic form, processing as electronically or magnetically stored media, copying or disse-
mination of these materials and/or the information contained herein, or any part thereof,
except for the internal use of BAUER Maschinen GmbH or its authorized external sup-
pliers, consultants or agents, without the prior written consent of BAUER Maschinen
GmbH is hereby strictly prohibited.
All rights and remedies are hereby expressly reserved.
Violators will be prosecuted.
BAUER Maschinen GmbH shall have no liability whatsoever arising from or connected
in any way to the so prohibited use of the information contained herein by any person or
entity, wherever located.
BAUER Maschinen GmbH reserves the right to change, delete or otherwise alter or
modify any information contained herein, or the equipment itself, at any time and for
any reason, with or without notice.
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
IX
TABLE OF CONTENTS
PREFACE ......................................................................................................................................................I
TABLE OF CONTENTS.............................................................................................................................. IX
ABOUT THE MANUAL .............................................................................................................................XIV
NAMEPLATES..........................................................................................................................................XVI
AFTER SALES SERVICE........................................................................................................................XVII
WARRANTY TERMS..............................................................................................................................XVIII
DEFECTS LIABILITY CLAIM ..................................................................................................................... XII
PERSONALANFORDERUNG / STAFF REQUEST ................................................................................. XIII
REGISTRIERUNG BETREIBER UND GERÄT/ OWNER AND EQUIPMENT REGISTRATION.............XIV
1DESCRIPTION.......................................................................................................................1 - 1
1.1 EQUIPMENT APPLICATIONS...............................................................................................1 - 1
1.2COMPONENTS......................................................................................................................1 - 4
1.2.1 Basic Rig / Kelly Equipment....................................................................................................1 - 4
1.2.1.1 Components Overview...........................................................................................................1 - 4
1.2.1.2 Components Description........................................................................................................1 - 5
2SAFETY..................................................................................................................................2 - 1
2.1 GENERAL SAFETY REQUIREMENTS .................................................................................2 - 1
2.2 EQUIPMENT SAFETY...........................................................................................................2 - 1
2.3 MAJOR HAZARDS.................................................................................................................2 - 1
2.4 SAFETY DEVICES.................................................................................................................2 - 2
2.4.1 Emergency Stop.....................................................................................................................2 - 2
2.4.2 Pilot Control Safety Stick ........................................................................................................2 - 2
2.4.3 Fire Extinguisher.....................................................................................................................2 - 3
2.4.4 Medical Box............................................................................................................................2 - 3
2.4.5 Emergency Exit.......................................................................................................................2 - 3
2.4.6 Limit Switches.........................................................................................................................2 - 4
2.4.7 Fall Protection Equipment *....................................................................................................2 - 5
2.5 STABILITY..............................................................................................................................2 - 6
2.5.1 Guidelines for Stability............................................................................................................2 - 6
2.5.2 Stability for BG 25 # 2254 - Kelly BK 25/394/4/56.................................................................2 - 7
2.5.2.1 Load Capacity Chart...............................................................................................................2 - 7
2.5.2.2 Weights / Centres of Gravity - Drilling Distance 3.39 m .........................................................2 - 8
2.5.3 Stability for BG 25 # 2254 - Kelly BK 25/394/4/40.................................................................2 - 9
2.5.3.1 Load Capacity Chart...............................................................................................................2 - 9
2.5.3.2 Weights / Centres of Gravity - Drilling Distance 3.39 m .......................................................2 - 10
2.6 PERMISSIBLE WIND SPEED..............................................................................................2 - 11
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
X
3TECHNICAL SPECIFICATIONS............................................................................................3 - 1
3.1 DIMENSIONS.........................................................................................................................3 - 1
3.1.1 Kelly Equipment BK 25/394/4/56............................................................................................3 - 1
3.2.1 Kelly Equipment BK 25/394/4/40............................................................................................3 - 2
3.2 EQUIPMENT SPECIFICATIONS...........................................................................................3 - 3
3.3 ROTARY DRIVE SPECIFICATIONS......................................................................................3 - 5
3.3.1 Rotary Drive, constant............................................................................................................3 - 5
3.4 DRILLING SPECIFICATIONS................................................................................................3 - 6
3.4.1 Kelly equipment......................................................................................................................3 - 6
3.5 ROPE SPECIFICATIONS ......................................................................................................3 - 7
3.5.1 Main Rope ..............................................................................................................................3 - 7
3.5.2 Auxiliary Rope.........................................................................................................................3 - 8
3.5.3 Crowd Ropes..........................................................................................................................3 - 9
3.6 NOISE EMISSION................................................................................................................3 - 10
3.7 TEMPERATURE CONDITIONS...........................................................................................3 - 10
3.8EXPOSURE TO VIBRATION...............................................................................................3 - 11
3.9 EXHAUST GAS EMISSION .................................................................................................3 - 11
4CONTROLS AND INDICATORS ...........................................................................................4 - 1
4.1 CAB ........................................................................................................................................4 - 1
4.2 BASE MACHINE CONTROL CONSOLE...............................................................................4 - 2
4.3 CONTROL PANEL.................................................................................................................4 - 3
4.4 MONITOR UNIT .....................................................................................................................4 - 4
5OPERATION ..........................................................................................................................5 - 1
5.1 TRAVEL..................................................................................................................................5 - 1
5.1.1 To Travel and Steer................................................................................................................5 - 1
5.2 UPPERCARRIAGE SWING...................................................................................................5 - 2
5.2.1 Swing Brake............................................................................................................................5 - 2
5.2.2 Swing Control .........................................................................................................................5 - 3
5.3 MAST REPOSITIONING........................................................................................................5 - 4
5.3.1 Mast Auto Reset to Vertical....................................................................................................5 - 5
5.3.2 Mast Repositioning by Manual Control...................................................................................5 - 6
5.3.2.1 To Adjust the Mast Inclination ................................................................................................5 - 6
5.3.2.2 To Adjust the Drill Distance....................................................................................................5 - 8
5.4 MAST PROP CONTROL * .....................................................................................................5 - 9
5.5 TRAVELLING WITH THE RIG.............................................................................................5 - 10
5.5.1 Travelling over Level Ground................................................................................................5 - 10
5.5.2 Travelling Up and Down Slopes ...........................................................................................5 - 11
5.5.2.1 With Raised Mast without Drilling Equipment.......................................................................5 - 11
5.6 ROTARY DRIVE CONTROL................................................................................................5 - 12
5.6.1 Kelly Application (Rotary Drive, constant).............................................................................5 - 12
5.7 WINCH CONTROL...............................................................................................................5 - 14
5.7.1 Lifting / Lowering...................................................................................................................5 - 14
5.7.2 To Operate with Freewheel..................................................................................................5 - 16
5.8 DEPTH MEASURING CONTROL........................................................................................5 - 17
5.8.1 To Reset the Depth Measuring.............................................................................................5 - 17
5.9 CROWD CONTROL.............................................................................................................5 - 18
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XI
5.9.1 Manual Control of the Crowd................................................................................................5 - 19
5.9.2 To Use the Main Winch in Combination with Crowd ............................................................5 - 20
5.10 USING THE ENGINE DIAGNOSTIC SYSTEM....................................................................5 - 21
5.11 CENTRAL LUBRICATION CONTROL * ..............................................................................5 - 22
6START-UP / SHUT-DOWN....................................................................................................6 - 1
6.1 START-UP..............................................................................................................................6 - 1
6.1.1 Initial Start-Up.........................................................................................................................6 - 1
6.1.2 Visual Inspection before Starting............................................................................................6 - 1
6.1.3 Daily Start-Up .........................................................................................................................6 - 2
6.1.3.1 Starting the Equipment...........................................................................................................6 - 2
6.1.3.2 Selecting the Engine Operating Mode....................................................................................6 - 3
6.1.4 Safety Tests before Starting to Work .....................................................................................6 - 4
6.1.4.1 Checking the Emergency STOP.............................................................................................6 - 4
6.1.4.2 Checking the Pilot Control Safety Stick..................................................................................6 - 4
6.1.4.3 Checking the End Limiters......................................................................................................6 - 5
6.2 SHUT-DOWN.........................................................................................................................6 - 6
6.2.1 Daily Shut-Down.....................................................................................................................6 - 6
6.2.2 Shut-Down for a Longer Period..............................................................................................6 - 6
7RIGGING / DE-RIGGING .......................................................................................................7 - 1
7.1 GUIDELINES FOR RIGGING AND DE-RIGGING.................................................................7 - 1
7.2 WAX REMOVAL.....................................................................................................................7 - 2
7.3 EXTENDING THE CRAWLERS.............................................................................................7 - 3
7.4 MOUNTING THE COUNTERWEIGHT..................................................................................7 - 4
7.5 MOUNTING THE MAST.........................................................................................................7 - 7
7.5.1 Mounting the Trestle...............................................................................................................7 - 7
7.5.2 Assembling the Mast Sections ...............................................................................................7 - 8
7.5.3 Installing the Ropes..............................................................................................................7 - 10
7.5.3.1 Installing the Main and Auxiliary Ropes................................................................................7 - 10
7.5.3.2 Installing the Upper Crowd Rope..........................................................................................7 - 11
7.5.4 Mounting Crowd Stroke Limiters ..........................................................................................7 - 12
7.5.5 Raising the Mast...................................................................................................................7 - 13
7.5.6 Mounting Retaining Clamps .................................................................................................7 - 14
7.6 ASSEMBLY OF WORK ATTACHMENTS............................................................................7 - 15
7.6.1 Assembly of Kelly Equipment...............................................................................................7 - 16
7.6.1.1 Mounting the Rope Swivel....................................................................................................7 - 16
7.6.1.2 Mounting the Rotary Drive....................................................................................................7 - 17
7.6.1.3 Mounting Kelly Guidance * ...................................................................................................7 - 18
7.6.1.4 Mounting the Kelly................................................................................................................7 - 20
7.6.2 Mounting Casing Oscillator *................................................................................................7 - 22
7.7 DISASSEMBLY OF WORK ATTACHMENTS......................................................................7 - 23
7.7.1 Disassembly of Kelly Equipment ..........................................................................................7 - 24
7.7.1.1 Removing the Kelly...............................................................................................................7 - 24
7.7.1.2 Removing the Rotary Drive...................................................................................................7 - 24
7.8 DISASSEMBLING THE MAST.............................................................................................7 - 25
7.8.1 Removing the Retaining Clamps..........................................................................................7 - 25
7.8.2 Lowering the Mast ................................................................................................................7 - 25
7.8.3 Removing the Ropes............................................................................................................7 - 26
7.8.3.1 Removing the Main and Auxiliary Rope................................................................................7 - 26
7.8.3.2 Removing the Upper Crowd Rope........................................................................................7 - 27
7.8.4 Disassembling the Mast .......................................................................................................7 - 28
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XII
7.8.5 Lowering the Trestle.............................................................................................................7 - 29
7.9 REMOVING THE COUNTERWEIGHT ................................................................................7 - 30
7.10 RETRACTING THE CRAWLERS ........................................................................................7 - 33
8TRANSPORT .........................................................................................................................8 - 1
8.1 SAFETY GUIDELINES FOR TRANSPORT...........................................................................8 - 1
8.2 MEASURES TO TAKE FOR TRANSPORT...........................................................................8 - 2
8.3 DRIVING ON / OFF A LOWLOADER ....................................................................................8 - 3
8.4 LIFTING POINTS ...................................................................................................................8 - 4
8.5 TRANSPORT DATA...............................................................................................................8 - 5
8.6 TYING DOWN........................................................................................................................8 - 6
9MAINTENANCE .....................................................................................................................9 - 1
9.1 SAFETY GUIDELINES FOR MAINTENANCE.......................................................................9 - 1
9.2 MAINTENANCE INTERVALS ................................................................................................9 - 1
9.3 MAINTENANCE PLAN...........................................................................................................9 - 2
9.3.1 Entire Equipment....................................................................................................................9 - 2
9.3.2 Components...........................................................................................................................9 - 3
9.3.3 Work Equipment.....................................................................................................................9 - 6
9.3.4 Uppercarriage.........................................................................................................................9 - 7
9.3.5 Undercarriage.........................................................................................................................9 - 9
9.3.6 Optional Equipment..............................................................................................................9 - 10
9.4 LUBRICATION PLAN...........................................................................................................9 - 11
9.5 MAINTENANCE DURING LONGER PERIODS OF STANDSTILL......................................9 - 12
9.6 HYDRAULIC SYSTEM.........................................................................................................9 - 13
9.6.1 Hose Assemblies..................................................................................................................9 - 14
9.6.2 Hydraulic Cylinders...............................................................................................................9 - 15
9.6.3 Filter Replacement ...............................................................................................................9 - 16
9.6.3.1 Replacing the Line Filters.....................................................................................................9 - 16
9.7 WINCHES.............................................................................................................................9 - 17
9.7.1 Checking the Oil Level..........................................................................................................9 - 17
9.7.2 Changing Gear Oil................................................................................................................9 - 18
9.8 REPLACING THE UPPER CROWD ROPE.........................................................................9 - 19
9.9 WIRE ROPE ACCESSORIES..............................................................................................9 - 24
9.9.1 Rope Swivel..........................................................................................................................9 - 24
9.9.2 Rope Hold-Down Rollers......................................................................................................9 - 24
9.9.3 Rope Fasteners, Thimbles and Sockets ..............................................................................9 - 25
9.9.4 Rope Sheaves......................................................................................................................9 - 26
9.9.4.1 Greasing Rope Sheaves ......................................................................................................9 - 26
9.9.4.2 Checking Rope Sheaves......................................................................................................9 - 27
9.10 ROTARY DRIVE...................................................................................................................9 - 28
9.10.1 Routine Inspection................................................................................................................9 - 28
9.10.2 Checking the Oil Level..........................................................................................................9 - 29
9.10.2.1 Main Gear.............................................................................................................................9 - 29
9.10.2.2 Planetary Gears....................................................................................................................9 - 30
9.10.3 Changing the Oil...................................................................................................................9 - 31
9.10.3.1 Main Gear.............................................................................................................................9 - 31
9.10.3.2 Planetary Gears....................................................................................................................9 - 33
9.10.4 Oil Sampling .........................................................................................................................9 - 35
9.10.5 Hollow Shaft Mounting Bolts.................................................................................................9 - 36
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XIII
9.10.6 Kelly Driver and Guide Flange..............................................................................................9 - 37
9.10.6.1 Checking the Mounting Bolts................................................................................................9 - 37
9.10.6.2 Checking Driver Strips for Wear...........................................................................................9 - 38
9.10.7 Cardan Joint .........................................................................................................................9 - 39
9.10.8 Sledge Sliding Strips.............................................................................................................9 - 39
9.10.9 Greasing the Shaft Seal Ring...............................................................................................9 - 40
9.11 CRAWLER TRACK ASSEMBLIES.......................................................................................9 - 41
9.11.1 Routine Inspection................................................................................................................9 - 41
9.11.2 Crawler Tracks .....................................................................................................................9 - 42
9.11.2.1 To Check the Track Tension................................................................................................9 - 42
9.11.2.2 Adjusting Crawler Track Tension .........................................................................................9 - 43
9.11.3 Checking Mounting Bolts......................................................................................................9 - 45
9.11.4 Crawler Drive Gears.............................................................................................................9 - 46
9.11.4.1 Checking the Oil Level..........................................................................................................9 - 46
9.11.4.2 Changing the Oil...................................................................................................................9 - 46
9.12 CENTRAL LUBRICATION SYSTEM MAINTENANCE *......................................................9 - 47
9.13 BOLTED CONNECTIONS....................................................................................................9 - 48
10 LUBRICANTS / TABLES.....................................................................................................10 - 1
10.1 LUBRICANTS.......................................................................................................................10 - 1
10.1.1 General.................................................................................................................................10 - 1
10.1.2 Lubricant Table.....................................................................................................................10 - 2
10.1.3 Lubricant Guide ....................................................................................................................10 - 4
10.1.3.1 Gear Oils, Synthetic CLP HC.............................................................................................10 - 4
10.1.3.2 Gear Oils, Petroleum ATF.................................................................................................10 - 5
10.1.3.3 Hydraulic Oils, Petroleum HVLP(D)...................................................................................10 - 6
10.1.3.4 Hydraulic Oils, Biodegradable on Synthetic Basis HVLP HC............................................10 - 7
10.1.3.5 Hydraulic Oils, Biodegradable HEES - Saturated Esters...................................................10 - 8
10.1.3.6 Engine Oils API CI-4..........................................................................................................10 - 9
10.1.3.7 Greases, Petroleum KP2N..............................................................................................10 - 10
10.2 BOLT TORQUE VALUES...................................................................................................10 - 11
10.2.1 Bolts with coarse-pitch metric thread..................................................................................10 - 11
10.2.2 Bolts with fine-pitch metric thread.......................................................................................10 - 12
10.3 CONVERSION TABLE.......................................................................................................10 - 13
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XIV
ABOUT THE MANUAL
THIS MANUAL IS MADE FOR
Equipment model: BG 25
Construction number: 2254
Construction year: 2010
Date of 1st operation: .. / .. / ....
Certification: CE
THIS MANUAL WAS PUBLISHED IN
02.2011
THE CHAPTERS OF THIS MANUAL
1 DESCRIPTION
2 SAFETY
3 TECHNICAL SPECIFICATIONS
4 CONTROLS AND INDICATORS
5 OPERATION
6 START-UP / SHUT-DOWN
7 RIGGING / DE-RIGGING
8 TRANSPORT
9 MAINTENANCE
10 LUBRICANTS / TABLES
APPENDICES
G:\...\2254_BG25_en_0000498763_V01
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XV
SYMBOLS USED IN THIS MANUAL
DANGER!
"Danger!" is used to identify an immediate hazard that can result in
serious injury or loss of life if the instructions given in the manual are
ignored or not correctly followed.
WARNING!
"Warning!" is used to identify a potential hazard that can result in
serious injury or loss of life if the instructions given in the manual are
ignored or not correctly followed.
CAUTION
"Caution" is used to identify a hazard that can result in moderate in-
jury and / or damage to the equipment if the instructions given in the
manual are ignored or not correctly followed.
NOTE
"Note" is used to highlight an operation, assembly or maintenance
procedure. In general, observance of the information here will facilitate
the work.
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XVI
NAMEPLATES
Nameplates on the equipment
Assembly
Location
Nameplate
Total equipment
BK786502.wmf
Bauer Maschinen GmbH
1
12
11
10
9
8
7
6
5
4
3
2
2001
nächstePrüfung
Sachkundigenprüfung
expert test CE - Zeichen
CEsign
D - 86522 Schrobenhausen Made in Germany
Gerätetyp
type
Baujahr
year of manufacture
Bau - Nr.
serial No Inv.- Nr.
Inv.No
Rückzugkraft
pulling force
Motorleistung
engine power
Gesamtgewicht
total weight
max. Druck
max. pressure
kN
bar
kg
kW
Trägergerät
base carrier
Vorschubkraft
pushing power
Frequenz
frequency
Arbeitspannung
working voltage
Betriebsdruck
working pressure
kN
bar
V
Hz
B0000551.wmf
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XVII
AFTER SALES SERVICE
How to reach the Service Centre
Phone +49 8252 97-25 86
Fax +49 8252 97-25 87
E-Mail KVT@bauer.de
NOTE
Whenever you consult the Service Centre, please give the following in-
formation so your inquiry can be dealt with more quickly.
Equipment description
-Name of model:
-Construction number:
-Number of operating hours:
Description of damage
-Date (DD.MM.YY):
-Cause of damage (if identifiable):
-Course of events leading to damage:
For possible check-backs
-Name of person to contact, phone / fax:
Description of site
-Name of site:
-Address (post code, town, street):
-Route description for a mechanic (as necessary):
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XVIII
WARRANTY TERMS
As far as a warranty agreement was concluded with the client the following terms apply to war-
ranty procedures:
Warranty period:
The contractual agreement is principally decisive for the warranty
period; as far as no agreement on the warranty period was con-
cluded the warranty is valid for 12 months from the time of com-
missioning.
Commencement:
The warranty comes officially into effect when the equipment is
put to the initial
recorded in the "Commissioning Certificate" and verified by the
signatures of both the Client and a representative of BAUER. In
any event, the warranty shall come into effect no later than 1 week
after delivery.
Warranty conditions:
- Original BAUER spare parts must be used throughout the war-
ranty period.
- Components and operating systems must not be dismantled or
repaired at any time during the warranty period without proper
authorisation.
- Any faults must be notified to BAUER in writing on the appropri-
ate "Warranty Claim" form within 24 hours after their occur-
rence.
- The Client or Operator of the BAUER equipment agrees to carry
out all services throughout the warranty period within the speci-
fied service intervals in full compliance with the Instruction Ma-
nual.
- Any work (servicing, repairs etc.) carried out on the equipment
must be recorded in the Maintenance and Repair Log provided
for this purpose with each item of equipment.
Warranty exclusions:
- Improper use or operation (misuse) of the equipment.
- Failure to adequately maintain or service the equipment causing
breakdowns and damage.
- Repairs which have been carried out improperly.
- Unauthorised modifications or alterations to the equipment.
- Forceful physical damage.
- Damage resulting from incorrect or improper operation.
- All normal wear and tear.
NOTE:
Wear and tear parts include drilling tools, kelly bars, ropes etc.
If a buyer has proven, that a damage is caused by a manufactur-
ing defect, the claim is dealt with on the basis of the warranty.
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
XIX
A) Liabilities and Responsibilities of BAUER
BAUER will supply spare parts required for carrying out repairs to BAUER equipment
under warranty to the Client.
Spare parts will be delivered c.i.f. (cost, insurance, freight) to the Client.
If necessary, BAUER will also provide personnel for carrying our repairs under warranty.
NOTE
Any defective parts replaced under warranty shall become the property of
BAUER.
BAUER shall determine whether defective parts are to be returned to their fac-
tory at Schrobenhausen, Germany. Transport costs for redeliveries will be paid
by BAUER Maschinen GmbH (after sales service).
Redeliveries / Deadlines
Concerning requested redeliveries the following deadlines are valid from the date of ar-
rival of the new parts on the jobsite in the assignment country until arrival of the dam-
aged parts in Schrobenhausen.
Redeliveries via air freight: 4 weeks
Redeliveries via sea freight: 4 months
If the damaged parts, which are redelivered via sea freight, are not redelivered in time
due to the jobsite situation, the after sales service department has to be informed cor-
respondingly, at the latest 6 weeks before expiry of the deadline.
Concerning redeliveries via air freight, an extension of the deadline is principally not
possible.
In case requested redeliveries are not returned within the agreed time period, the cor-
responding open amounts according to the sales invoice have to be paid by the respec-
tive customer.
B) Liabilities and Responsibilities of the Client
Any customs duties payable in the country of destination for a consignment of spare
parts supplied under warranty shall be the responsibility of the Client.
Local transport to a final destination (construction site) in connection with a warranty
claim shall also be the responsibility of the Client.
Full and meticulous compliance with all operating instructions and observance of proper
operating procedures for all equipment.
Full compliance with the specified and necessary service schedule.
Entering and maintaining full and comprehensive records in the Maintenance and Repair
Log.
Table of contents
Other Bauer Drill manuals
Bauer
Bauer 20V Hypermax Lithium 1895C-B User manual
Bauer
Bauer 1996E-B Assembly instructions
Bauer
Bauer 1992E-B User manual
Bauer
Bauer 20V Hypermax Lithium 1895C-B User manual
Bauer
Bauer 1642E-B User manual
Bauer
Bauer 1996E-B User manual
Bauer
Bauer 1695E-B User manual
Bauer
Bauer 2391E-B Assembly instructions
Bauer
Bauer 1997E-B User manual
Bauer
Bauer 1642E-B User manual
Bauer
Bauer 1695E-B Assembly instructions
Bauer
Bauer HYPERMAX 1992C-B User manual
Bauer
Bauer Hypermax Lithium 1791C-B1 User manual
Bauer
Bauer 2191CR-B User manual
Bauer
Bauer HYPERMAX 1992C-B User manual
Bauer
Bauer Hypermax Lithium 1791C-B1 Assembly instructions
Bauer
Bauer 1695E-B Assembly instructions
Bauer
Bauer BG 11 H ValueLine User manual
Bauer
Bauer 1641E-B User manual
