BCP Cabana SKY5786 User manual

SKY5786
INSTRUCTION
MANUAL
Sandbox Cabana
Ver. 1

2 |
HARDWARE
TOOLS REQUIRED
A
34 PCS
M3 X 35MM
SCREW
M3 X 30MM
SCREW
B
6 PCS
SNAP BUTTON
SCREW
F
8 PCS
•Please do not exceed the weight limitations of this item.
•Do not stand on or use any part of this item as a step ladder.
•Firmly secure all bolts, screws, and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Fasten screws loosely during initial assembly. Do not fully tighten screws until the item is
completely assembled.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•Be aware that some parts are heavy and have sharp edges.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void
the product warranty.
NOTICE
PHILLIPS
SCREWDRIVER
C
4 PCS
M6 X 40MM
SCREW
D
12 PCS
M6 X 30MM
BOLT
E
12 PCS
M6 SLEEVE
NUT
Please retain these instructions for future reference.
DRILL UP TO 45 MIN.
ASSEMBLY
2 PERSON
ASSEMBLY
3 YEARS
OLD AND UP
3+
ADULT ASSEMBLY REQUIRED
CHOKING HAZARD -Small parts.
Not for children under 3 years old.

4
2 PCS
FRAME II
PARTS
4 PCS
SIDE FRAME I
1
2 PCS
SIDE FRAME II
2
2 PCS
SIDE BENCH
6
5
2 PCS
FRAME SUPPORT
2 PCS
FRAME I
3
10
2 PCS
BACKREST
1 PC
BENCH
7
1 PC
BENCH WITH
BUCKETS
8
2 PCS
ROOF FRAME
12
11
4 PCS
ROOF SUPPORT
1 PC
BENCH SUPPORT
9
| 3

4|
16
2 PCS
BUCKET
PARTS
4 PCS
POLE
13
1 PC
ROOF
14
1 PC
SAND TARP
15
17
1 PC
COVER

PRODUCT ASSEMBLY
1Insert part 3 and part 4 frames into the designated slots on two part 1 side frames.
Insert two part 2 side frames into the designated slots.
| 5
2Insert additional part 3 and part 4 frames into the designated slots.
Insert two additional part 1 side frames into the designated slots.
LONG END
Make sure to position the
long end of the side
frames on the same side.
2
x2
1
x2
1
x2
4
4
3
3

6|
PRODUCT ASSEMBLY
3Attach two part 5 frame supports with six part B screws.
4Attach part 9 bench support with two part A screws.
5
x2
Bx6
Ax2
9

PRODUCT ASSEMBLY
5Attach two part 6 side benches with ten part A screws.
| 7
6Attach part 7 and part 8 benches with fourteen
part A screws.
A
x10
A
x14
6
x2
7
8
Make sure benches are positioned
correctly and slots on part 7 and 8
are clear of obstructions.

8|
PRODUCT ASSEMBLY
7Attach two part 10 backrests with four part C screws.
NOTE: If necessary, flip assembly on its side.
8Insert four part 11 roof supports into the designated slots, then attach them with eight part D
bolts and eight part E sleeve nuts.
Cx4
10
x2
11
x4
Ex8
Dx8

| 9
PRODUCT ASSEMBLY
9Slide four part 13 poles into the part 14 roof. Attach two part 12 roof frames with eight
part A screws.
10 Attach the roof with four part D bolts and four part E sleeve nuts.
12
x2
13
x4
Ax8
14
Dx4
Ex4

10 |
PRODUCT ASSEMBLY
11
12
Place two part 16 buckets.
Place the sandbox on top of the part 15 sand tarp.
16
x2
15

| 11
COVERING SANDBOX
2Secure the part 17 cover with the built-in buttons.
1Drill eight part F snap button screws into the sandbox. Make sure the screws align witthe
buttons on the cover.
F
x8
17

All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
HELP CENTER
Product Assembly Returns & Refunds
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!
6 |10 |
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long
as the item is returned in its original product packaging and all accessories from its original shipment are
included. All returned items will receive a full refund back to the original payment method. All returned
items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best
Choice Products Customer Service Representative when the return request is submitted. Items received
without an RA may not be accepted or may increase your return processing time. Once an item has been
received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If
the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide
a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products,
and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items
returned are not considered undamaged until they are received by Best Choice Products and verified as
such. All damages to items are the customer’s responsibility until the item has been received by and
acknowledge by Best Choice Products as undamaged.
PRODUCT WARRANTY INFORMATION
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or
loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, unapproved modification, or neglect of this product.
HELP CENTER
Product Assembly Returns & Refunds
WARNING
Question about your product? We're here to help. Visit us at:
help.bestchoiceproducts.com
CHAT
US!