BEHA TSH80 User manual

SHOE DRYER
Model: TSH80 Instruction Manual
l Thank you for purchasing our BeHa Shoe Dryer. This is a modern high
quality product, that is easy to use.
l Please read this instruction manual carefully and keep it for future use.

IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the
risk of fire, electric shock, burns and other injuries. Precautions include the following:
1. Read all instructions carefully before using the heater.
2. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electrical shock, or injury to persons.
3. Remove the packaging and ensure that the heater is undamaged. In case of doubt, do not
use the heater, and contact your supplier.
4. Do not let children play with the packaging, as it contains materials like plastic bags.
5. Before using the heater, check if the voltage marked on the rating label corresponds to the
mains in your home.
6. Extreme caution is necessary when the heater is used by or near children or people with
special needs or disabilities, and whenever the heater is left operating unattended.
7. Avoid using an extension cord as the extension cord may overheat and cause a risk of fire.
8. Do not pull the power cord to disconnect from power source. Always pull by the plug.
9. Do not insert any objects into the heater as it may cause an electric shock or fire or damage
to the heater. Do not block or tamper with the heater in any manner while it is in operation.
To prevent a possible fire, do not block air inlet or outlet in any manner. Do not place on soft
surfaces, like a bed, where openings may become blocked.
10. Do not leave the heater unattended. Always unplug the heater when it’s not in use.
11. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Always use handle when moving this heater. Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes and curtains at least 1 meter from the heater.
12. The heater has hot and arcing or sparking parts inside. It must NOT be used in potentially
dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres.
This heater is intended for general use ONLY.
13. This heater is not intended for use in wet or damp locations. Do not use this heater in the
immediate surroundings of a bath, a shower or a swimming pool. Never locate a heater
where it may fall into a bathtub or other water container.
14. Do not use the heater outdoors.
15. Make sure the heater is not located immediately above or below a socket-outlet.
16. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instructions concerning use of the appliance in a safe way
and they understand the hazards involved.
17. Children shall not play with the appliance.
18. Cleaning and user maintenance shall not be performed by children without supervision.
19. Children of less than 3 years should be kept away unless continuously supervised.
20. Children aged from 3 years and less than 8 years shall only switch on/off the appliance
provided that it has been placed or installed in its intended normal operating position and
they have been given supervision or instructions concerning use of the appliance in a safe
way and they understand the hazards involved. Children aged from 3 years and less than 8
years shall not plug in, regulate, clean the appliance or perform user maintenance.
21. CAUTION — Some parts of this product can become very hot and cause burns.
Particular attention has to be given when there are children and vulnerable people

present.
22. Warning: In order to avoid overheating, do not cover the heater.
23. The main power switch should not be used as the sole means for disconnecting power.
Always unplug the power cord before servicing or moving the unit.
24. To avoid danger of electric shock, unplug the appliance from outlet when not in use and
before cleaning. If the supply cord is damaged, it must be replaced by the manufacturer or a
qualified service agent to avoid a hazard.
CAUTIONS
l This appliance is not a toy.
l This appliance is for household use only.
l Do not immerse the unit in water.
l To avoid the risk of fire or electric shock do not attempt to perform repairs or dismantle the
heater.
l Any servicing other than cleaning and user maintenance should be performed by
authorized service personnel only.
l If the power cord is damaged, it must be replaced by the manufacturer or authorized service
personnel.
l Repair should be done by authorized service personnel only.
PARTS DESCRIPTION
1) Power Cord
2) Left mounting bracket
3) Power Switch
4) Left Cover
5) Heat Pipe
6) Right cover
7) Right mounting bracket
.
2
3
4
5
1
6
7

INSTALL THE APPLIANCE ON THE WALL
l The shoe dryer must be installed horizontally on the wall with the mounting brackets
provided.
l Remove all packaging before installing. Do not plug in the power cord until you have
finished installing the appliance.
l Place the paper on the wall in the position you would like to install the appliance. Drill two
holes as marked on the paper (As Fig.1). The appliance shall not be installed higher than
0.3m from the floor.
NOTE: REMOVE THE PAPER AFTER DRILLING THE HOLES.
l Please fix the mounting brackets to the dryer according to the position of Fig. 2 (As Fig.2).
l Please hang the shoe dryer on the wall, onto the screws, and move it down (As Fig.3~4).
● Fix another screw to each mounting bracket (As Fig.5).
Fig.1 Fig.2
Fig.3 Fig.4

Fig.5
OPERATION
● When the appliance has been mounted on the wall according to the installation instructions,
it is ready to be used. Make sure the switch is in the “OFF” position and plug in the appliance.
● Place your shoes on the drying rack, and turn on the power switch.
● There are two work positions for the drying rack, it can be used flat for drying shoes etc., or
clipped up for drying towels etc., see pictures above.

MAINTENANCE
l The shoe dryer only needs regular cleaning on the outside.
l Before you clean the unit, turn the switch to "OFF". Remove the plug from the
socket and wait for the dryer to cool down.
l Use a damp cloth to wipe the rack.
l Do not use detergents, abrasive cleaning liquids or chemical agents
(alcohol, gasoline etc.) to clean the unit. Do not immerse the unit in water.
SPECIFICATIONS
l Power supply voltage: AC.220-240V/50Hz
l Power consumption: 80W
l Insulation class: Class 1
l Net Weight: 1,7kg
l Dimensions: 900(L) X270 (W) X65 (H) mm