Miele PT 7135 C User manual

Installation plan
Tumble dryer
PT 5135 C
PT 7135 C
To avoid the risk of accidents or damage to the machine, it is essential to read
operating and installation instructions before installation and commissioning
This prevents both personal injury and damage to the machine.
en - GB
10 145 320 / 01

2 10 145 320 / 01
Legend:
Connection required
Connection optional or required,
depending on model
AL
Vented
KLZ
Cooling air
ASK
Condensate drain hose
PA
Equipotential bonding
B
Machine anchors
SLA
Peak-load connection
EL
Electrical connection
UG
Box plinth
F
Machine feet, adjustable
UO
Open plinth
KG
Payment system
WTV
Washer-dryer stacking kit
KGA
Payment system connection
XKM
Communication module
KLA
Cooling air
ZL
Air intake
All rights reserved. 12/14/4

PT 5135/7135 en - GB
10 145 320 / 01 3
Machine dimensions

en - GB PT 5135/7135
4 10 145 320 / 01
Installation

PT 5135/7135 en - GB
10 145 320 / 01 5
Washer-dryer stack

en - GB PT 5135/7135
6 10 145 320 / 01
Installation

PT 5135/7135 en - GB
10 145 320 / 01 7
Installation

en - GB PT 5135/7135
= standard, = optional, + = only on request, - not available
8 10 145 320 / 01
Technical data
PT 5135 C
PT 7135 C
Drying system
Condensation
Condensation
Drum volume
l
130
130
Load capacity
kg
6.5
6.5
Door opening diameter
mm
391
391
Electrical connection (EL)
Standard voltage
2N AC 400V
2N AC 400V
Frequency
Hz
50
50
Total rated load
kW
3.68
3.68
Fuse rating (B trip rating according to EN 60898)
A
2 x 10
2 x 10
Supply lead min. cross-section
mm²
4 x 1.5
4 x 1.5
Supply lead (H05RN-F) without plug for hard-wired connection


Length of supply lead
mm
2000
2000
Alternative voltage (convertible by Service)
1N AC 230V
1N AC 230V
Frequency
Hz
50
50
Total rated load
kW
2.17
2.17
Fuse rating (B trip rating according to EN 60898)
A
1 x 10
1 x 10
Supply lead min. cross-section
mm²
3 x 1.5
3 x 1.5
Non-standard voltage OS 230 (Offshore)
2 AC 230 V
3 AC 230 V
Frequency
Hz
60
60
Total rated load
kW
3.68
3.68
Fuse rating (B trip rating according to EN 60898)
A
2 x 16
3 x 16
Supply lead min. cross-section
mm²
3 x 1.5
3 x 1.5
Supply lead without plug for hard-wired connection


Length of supply lead
mm
2000
2000
Variations in the following countries:
Standard voltage 13A (GB only)
1N AC 220-230 V
1N AC 220-230 V
Frequency
Hz
50
50
Total rated load
kW
2.76 - 2.99
2.76 - 2.99
Fuse rating (B trip rating according to EN 60898)
A
1 x 13
1 x 13
Supply lead min. cross-section
mm²
3 x 1.5
3 x 1.5
Supply lead with plug


Length of supply lead
mm
2000
2000
Standard voltage (DK only)
2N AC 400 V
-
Frequency
Hz
50
-
Total rated load
kW
3.68
-
Fuse rating (B trip rating according to EN 60898)
A
2 x 10
-
Supply lead min. cross-section
mm²
4 x 1.5
-
Supply lead without plug for hard-wired connection

-
Length of supply lead
mm
2000
-
Standard voltage (N only)
1N AC 230 V
1N AC 230 V
Frequency
Hz
50
50
Total rated load
kW
3.68
3.68
Fuse rating (B trip rating according to EN 60898)
A
1 x 16
1 x 16
Supply lead min. cross-section
mm²
3 x 1.5
3 x 1.5
Supply lead with plug


Length of supply lead
mm
2000
2000
Alternative voltage (convertible)
3 AC 230 V
3 AC 230 V
Frequency
Hz
50
50
Total rated load
kW
3.68
3.68
Fuse rating (B trip rating according to EN 60898)
A
3 x 16
3 x 16
Supply lead min. cross-section
mm²
4 x 1.5
4 x 1.5

PT 5135/7135 en - GB
= standard, = optional, + = only on request, - not available
10 145 320 / 01 9
Technical data
PT 5135 C
PT 7135 C
Standard voltage (FIN only)
-
2N AC 400 V
Frequency
Hz
-
50
Total rated load
kW
-
3.68
Fuse rating (B trip rating according to EN 60898)
A
-
2 x 10
Supply lead min. cross-section
mm²
-
4 x 1.5
Supply lead without plug for hard-wired connection
-

Length of supply lead
mm
-
2000
Alternative voltage (convertible)
1N AC 230 V
Frequency
Hz
-
50
Total rated load
kW
-
3.68
Fuse rating (B trip rating according to EN 60898)
A
-
1 x 16
Supply lead min. cross-section
mm²
-
3 x 1.5
Alternative voltage (convertible)
1N AC 230 V
Frequency
Hz
-
50
Total rated load
kW
-
2.17
Fuse rating (B trip rating according to EN 60898)
A
-
1 x 10
Supply lead min. cross-section
mm²
-
3 x 1.5
Standard voltage (AUS only)
-
1N AC 230-240 V
Frequency
Hz
-
50
Total rated load
kW
-
2.17 –2.34
Fuse rating
A
-
1 x 10
Supply lead min. cross-section
mm²
-
3 x 1.0
Supply lead with plug
-

Length of supply lead
mm
-
2000
Standard voltage (J only)
-
1N AC 200 V
Frequency
Hz
-
50 –60
Total rated load
kW
-
3.7
Fuse rating
A
-
1 x 20
Supply lead min. cross-section
mm²
-
3 x 2.75
Supply lead with plug
-

Length of supply lead
mm
-
2000
Condensate drain hose (ASK)
Drainage temperature, max.
°C
70
70
Max. transient flow rate
l/min
3.6
3.6
On-site hose sleeve for drain hose (outer dia. x length)
mm
10 x 30
10 x 30
Drain hose (internal diameter)
mm
10 (DN10)
10 (DN10)
Drain hose length
mm
1800
1800
Drain pump head height from bottom edge of machine, max.
mm
1000
1000
Cooling air intake (KLZ)
Air flow must remain unobstructed at all times
Cooling air discharge vent (KLA)
Air flow must remain unobstructed at all times
Equipotential bonding (PA)
Machine connection (separate kit required)


Peak load/energy management (SLA)
Machine connection (separate kit required)


Control signal voltage
230 V
230 V
Payment system connection (KGA)
Connection of payment systems


Communication module (XKM)
RS 232 serial interface (XKM module retrofitting kit)



en - GB PT 5135/7135
= standard, = optional, + = only on request, - not available
10 10 145 320 / 01
Technical data
PT 5135 C
PT 7135 C
Installation on machine feet (F)
No. of machine feet
No.
4
4
Machine foot, height-adjustable with thread
mm
+14.5 / -7
+14.5 / -7
Machine foot diameter
mm
40
40
Anchoring (B)
Standard anchoring
Floor anchor kit (for 2 machine feet)


Wood screws according to DIN 571
mm
6 x 50
6 x 50
Rawl plugs (diameter x length)
mm
8 x 40
8 x 40
Anchoring of Miele plinths
Miele plinth installation (fasteners included)


Required anchor points
No.
4
4
Wood screws according to DIN 571
mm
8 x 65
8 x 65
Rawl plugs (diameter x length)
mm
12 x 60
12 x 60
Plinth floor anchoring (to be provided on site)
Machine installation on permanent plinth (concrete or masonry)


Plinth installation footprint (W/D)
mm
600/650
600/650
Wood screws according to DIN 571
mm
6 x 50
6 x 50
Rawl plugs (diameter x length)
mm
8 x 40
8 x 40
Machine data
Overall machine dimensions (H/W/D):
mm
850/600/709
850/600/709
Casing dimensions (H/W/D)
mm
850/595/697
850/595/697
Site-access dimensions (H/W)
Min. site-access (excl. packaging)
mm
900/600
900/600
Installation dimensions
Min. side gap
mm
20
20
Recommended side gap - washer-dryer stack
mm
300
300
Recommended min. distance to opposite wall from machine front
mm
900
900
Recommended distance to opposite wall from front of machine
mm
1100
1100
Weights and floor loads
Machine weight (net weight)
kg
57
57
Max. floor load in operation
N
720
720
Emissions
Sound pressure level in accordance with EN ISO 11204/11203
dB(A)
< 70
< 70
Heat dissipation rate to installation site
W
2500
2500