Beko Lxd 6155 s Owner's manual

Tall Larder

Fridge

LXD 6155 S

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in a 1st-class

manufacturing facility and checked under the most meticulous quality control

procedures, will provide you with years of good service.

For this, we recommend you to carefully read the entire manual of your product

before using it and keep it at hand for future reference.

This manual

• Will help you use your appliance quickly and safely.

• Read the manual before installing and operating your product.

• Follow the instructions, especially those for safety.

• Keep the manual in an easily accessible place as you may need it later.

• Besides, read also the other documents provided with your product.

Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

CImportant information or useful usage tips.

AWarning against dangerous conditions for life and property.

BWarning against electric voltage.

1 Your refrigerator 4

2 Warnings 5

Electrical requirements................... 6

Warning! This appliance must be

earthed.......................................... 6

Energy saving tips ......................... 7

Compliance with WEEE Directive and

Disposing of the Waste Product: ... 7

Compliance with rohs directive: .... 7

Package information...................... 7

3 Installation 8

Transportation Instructions............. 8

Installation Instructions .................. 8

Changing the illumination lamp ..... 9

Reversing The Doors ...................11

4 Before operating 13

Starting........................................ 13

Water Dispenser .......................... 14

*optional ...................................... 14

5 Using your refrigerator 16

Using interior compartments........ 16

Stopping your product................. 16

Cooling........................................ 17

Placing the food .......................... 17

6 Maintenance and

cleaning 18

7 Do’s and Don’ts 19

C Figures that take place in this instruction manual are schematic and may not

correspond exactly with your product. If the subject parts are not included in the

product you have purchased, then it is valid for other models.

1Your refrigerator

Congratulations on your choice of a BEKO quality Appliance which has been

designed to give you service for many years.

1. Temperature adjustment

2. Adjustable door shelves

3. Egg tray

4. Water Dispenser

5. Bottle shelves

6. Adjustable front feet

7. Crisper

8. Chiller with glass cover

9. Movable shelves

10. Wine rack

11. Fan

2Warnings

• Do not connect your appliance to

the electricity supply until all packing

and transit protectors have been

removed.

• If transported horizontally leave

to stand upright for at least 4

hours before switching on to allow

compressor oil to settle

• If you are discarding an old

refrigerator with a lock or latch fitted

to the door, disable the lock/latch,

ensure that it is left in a safe condition

to prevent the entrapment of young

children.

• This appliance must only be used for

its intended purpose i.e the storing

and freezing of edible foodstuff.

• Do not dispose of the appliance

on a fire. At BEKO, the care and

protection of our environment is an

ongoing commitment. This appliance

which is among the latest range

introduced is particularly environment

friendly. Your appliance contains non

CFC / HFC natural substances in the

cooling system (Called R600a) and in

the insulation (Called cyclopentane)

which are potentially flammable

if exposed to fire. Therefore, take

care not to damage, the cooling

circuit / pipes of the appliance in

transportation and in use. In case of

damage do not expose the appliance

to fire or potential ignition source and

immediately ventilate the room where

the appliance is situated.

• We suggest you contact your local

authority for disposal information and

facilities available.

• See Installation Instructions on page

8 for information on suitable location.

• To obtain the best possible

performance and trouble free

operation from your appliance it is

very important to carefully read these

instructions.

• On delivery, check to make sure that

the product is not damaged and that

all the parts and accessories are in

perfect condition.

• Ensure that the plug remains readily

accessible. Do not use multiple

adapter or extension cable.

• Failure to observe these instructions

may invalidate your right to free

service during the guarantee period.

• Keep ventilation openings, in the

appliance enclosure or in the built-in

structure, clear of obstruction.

• Do not use mechanical devices

or other means to accelerate the

defrosting process, other than those

recommended by the manufacturer.

• Do not damage the refrigerant circuit.

• Do not use electrical appliances

inside the food storage

compartments of the appliance,

unless they are of the type

recommended by the manufacturer.

• We suggest you keep these

instructions in a safe place for easy

reference.

• This appliance can be used by

children aged from 8 years and above

and persons with reduced physical,

sensory or mental capabilities or

lack of experience and knowledge

if they have been given supervision

or instruction concerning use of

FITTED WITH

BS 1362 13A FUSE ALWAYS

FIT BS 1362 REPLACEMENT

CARTRIDGE FUSE

GREEN &

YELLOW

GREEN

BLUE

BLACK

BROWN

RED

22mm.

6mm.

6mm. 32mm.

12mm.

FUSE

CORD GRIP

the appliance in a safe way and

understand the hazards involved.

Children shall not play with the

appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

• Children should be supervised to

ensure that they do not play with the

appliance.

Electrical requirements

Before you insert the plug into the wall

socket make sure that the voltage and

the frequency shown on the rating

plate inside the appliance corresponds

to your electricity supply.

Rating label is on the left hand side of

fridge inner liner.

We recommend that this appliance be

connected to the mains supply via a

suitable switched and fused socket.

The appliance must be positioned so

that the plug is accessible.

Should the mains lead of the appliance

become damaged or should it need

Replacing at any time, it must be

replaced by a special purpose made

mains lead which can only be obtained

from a BEKO authorised service

agent.

Warning! This appliance

must be earthed

If the fitted moulded plug is not

suitable for your socket, then the plug

should be cut off and an appropriate

plug fitted. Destroy the old plug which

is cut off as a plug with bared cord

could cause a shock hazard if inserted

into a socket elsewhere in the house.

The moulded plug on this appliance

incorporates a 13 A fuse. Should

the fuse need to be replaced an

ASTABEAB approved BS 1362 fuse

of the same rating must be used. Do

not forget to refit the fuse cover. In the

event of losing the fuse cover the plug

must not be used until a replacement

fuse cover has been fitted.

Colour of the replacement fuse cover

must be the same colour as that

visible on the pin face of the plug. Fuse

covers are available from any good

electrical store.

Important! Fitting A Different Plug

As the colours of the wires in the

mains lead of this appliance may

not correspond with the coloured

markings identifying the terminals in

your plug proceed as follows: (See

diagram).

1. Connect the green-yellow or green

(Earth) wire to the terminal in the plug

marked ‘E’ or with the symbol or

coloured green and yellow or green.

2. Connect the blue (Neutral) wire to

the terminal in the plug marked ‘N’ or

coloured black.

3. Connect the brown (Live) wire to the

terminal in the plug marked ‘L’ or

coloured red.

With alternative plugs a 13 A fuse must

be fitted either in the plug or adaptor

or in the main fuse box. If in doubt

contact a qualified electrician.

Energy saving tips

1. Ensure your appliance is installed in a

well ventilated area.

2. Ensure the time between buying

chilled/frozen food and placing

them in your appliance is kept at

minimum, particularly in summer. We

recommend you use a cool bag or a

special carrier bag to carry perishable

food.

3. Do not leave the door (s) of your

appliance open longer than

necessary and ensure they are closed

properly after each opening.

4. Defrost frozen food in the fridge

compartment, so that frozen food

acts as an ice pack to assist cooling

in the fridge.

5. Energy consumption of this

appliance is measured while

freezer compartment is loaded

without use of top shelf lid and

the drawers except the bottom

drawer. It is advised that any freezer

compartment is loaded without use

of drawers except the bottom drawer

in order to achieve maximum loading

capacity.

Compliance with WEEE

Directive and Disposing of

the Waste Product:

This product complies with EU WEEE

Directive (2012/19/EU). This

product bears a

classification symbol for

waste electrical and

electronic equipment

(WEEE).This product has

been manufactured with

high quality parts and materials which

can be reused and are suitable for

recycling. Do not dispose of the waste

product with normal domestic and

other wastes at the end of its service

life. Take it to the collection center for

the recycling of electrical and

electronic equipment. Please consult

your local authorities to learn about

these collection centers.

Compliance with rohs

directive:

The product you have purchased

complies with EU RoHS Directive

(2011/65/EU). It does not contain

hleverful and prohibited materials

specified in the Directive.

Package information

Packaging materials of the product

are manufactured from recyclable

materials in accordance with our

National Environment Regulations. Do

not dispose of the packaging materials

together with the domestic or other

wastes. Take them to the packaging

material collection points designated

by the local authorities.

3Installation

Transportation Instructions

1. The appliance should be transported

only in a vertical upright position. The

packing as supplied must be intact

during transportation.

2. If during the course of transport the

appliance has to be transported

horizontally, the product must only

be laid on its right hand side (when

facing the door front) and it must not

be operated for at least 4 hours to

allow the system to settle after the

appliance is brought back to upright

position.

3. Failure to comply with the instructions

could result in damage occurring

to the appliance. The manufacturer

will not be held responsible if these

instructions are disregarded.

4. The appliance must be protected

against rain, moisture and other

atmospheric influences.

5. When positioning your appliance take

care not to damage your flooring,

pipes, wall coverings etc. Do not

move the appliance by pulling by the

door or handle.

6. Empty any water in the drain tray and

Water Dispenser tank before moving.

See section ‘Defrosting’ and ‘Care &

cleaning’ for further information.

7. Make sure that the defrost water pipe

at the back of the product is fixed

to the plastic evaporating pan on

the top of the compressor, to avoid

defrost water spillage on the floor.

Important Care must be taken

when carrying the appliance to avoid

touching the bottom of the condenser

metal support/pipework at the back of

the appliance as you might injure your

fingers and hands or damage your

product.

Important :

Make sure that mains cable is not

caught under the appliance during and

after carrying/moving the appliance, to

avoid the mains cable becoming cut or

damaged.

Do not attempt to sit or stand on top

of your appliance. You could injure

yourself and damage the appliance.

BEKO declines to accept any

liability should the instructions not be

followed.

Installation Instructions

1. Fit the two plastic wall spacers

supplied with the appliance onto

the condenser at the back of the

appliance by rotating 1/4 turn.

2. Locate the appliance on a smooth

surface.

3. To ensure it is standing upright

adjust the two front feet by turning

clockwise or anti-clockwise, until it is

in firm contact with the floor. Correct

adjustment of feet avoids excessive

vibration and noise.

4. A special receptacle is supplied to

store the mains plug during transit.

The receptacle is fixed at the back

of the cabinet on the side of the

compressor. Gently remove the plug

from the receptacle. Never pull the

mains cord, you may damage the

appliance. In case of transportation,

ensure you locate the plug in the

receptacle provided to avoid transit

damage.

5. The space in the room where the

appliance is installed must not be

smaller than 10 cubic metres.

Changing the illumination

lamp

To change the LED used for

illumination of your refrigerator, call

your Authorised Service.

45°

180°

Reversing The Doors

We recommend that you reverse the

door before switching on for the first

time.

Tools required: Small and medium size

flat and cross-headed screwdrivers, a

pair of pliers.

Spare Parts supplied in the plastic

bag: The following parts, which are

exclusively for left hand side fitted

hinge operation are supplied in a

plastic bag with the appliance:

- Door top trim hinge covers – there

are 2 different parts, one for each side

of top trim.

We suggest you keep all the parts

supplied in the plastic bag and also

parts, which have been removed when

reversing the door, in a safe place for

possible future, re-use.

Important:

We suggest you ask somebody to

help you when moving the appliance

around and to hold the door when

removing / re-fitting hinges and the

door to avoid any injury and damage

to the product.

Please refer to diagrams supplied. To

follow numbers in brackets below,

refer to the main diagram.

1. Switch off the appliance at the

socket outlet and pull out the mains

plug.

2. Remove all loose items and fittings

and food inside the appliance.

3. Gently prise off plastic hinge covers

on both sides of front top panel using

a small flat-headed screwdriver. (1-2)

4. Unscrew the bolts of the top hinge

and remove top hinge. (3)

5. Remove door carefully off the bottom

hinge and stand door upright in a

safe place.(4)

6. Gently prise off plastic hinge cover on

door top trim. Fit the other door top

trim plastic off hinge cover supplied in

the plastic bag.(5)

7. Gently tilt the appliance back

against a strong wall on its rear side

sufficiently to allow the lower hinge

to be removed. Take care to protect

the appliance, your wall and floor

coverings. You can utilise the original

packaging to do this.Once you tilt the

appliance back, check to make sure

the appliance is completely stable

and safe before you carry on. (6)

8. Unscrew and remove the front feet

and 1 bolt. (7)

9. Unscrew and remove the bottom

hinge. (8)

10. Unscrew and remove the bottom

hinge door stopper and bushing and

reposition them on the other side

while rotating the bushing 180°. (9)

11. Fit the bottom hinge and tighten the

screws as shown in figure. (10)

12. Fit the other front feet as shown in

figure. (11)

13. Rotate the top hinge 180°. Unscrew

the hinge pin and re-tighten it to the

opposite side. (12)

14. Fit the top hinge on the left hand side

bushing of the door. (13)

15. Locate and re-fit door to bottom

hinge pin. (14)

16. Re-fit the upper hinge on the

opposite side by using a flat headed

screwdriver. (15)

17. Fit front top panel plastic hinge covers

on the opposite sides. (16)

18. Remove the handle cover gently

taking care not to damage the

appliance.(17)

19. Unscrew and remove the handle (18).

Do not unscrew the yellow coloured

screws!

20. Rotate 180 degrees and fit handle

to the other side after removing hole

plugs gently.(19,20)

21. Fit the handle cover.(21)

22. Adjust the two front feet if necessary.

23. Check that door opens and closes

easily, it is aligned correctly and there

are no gaps allowing air into the

cabinet. If there are gaps between the

door seal and the cabinet, adjust the

door seal by gently pulling away from

the door using fingers.

24. Check that all the hinge screws are

tightened. Avoid over tightening the

screws.

25. Put all items, fittings back in the

appliance.

26. Wait for at least 4 hours to allow the

system to settle before switching on.

27. Once the correct storage

temperatures have been reached in

the appliance, put back all the food.

4Before operating

Starting

Final Check

Before you start using the refrigerator

check that:

1. The front feet have been adjusted so

the appliance is level.

2. The interior is dry and air can circulate

freely around the outside of the

product.

3. Clean the interior as recommended

under “CLEANING AND CARE.”

4. Insert the plug into the wall socket

and switch on the electricity supply.

When the door is open the interior

light will come on.

5. You will hear a noise as the

compressor starts up. The liquid and

gases sealed within the refrigeration

system may also give rise to noise,

whether the compressor is running or

not which is quite normal.

6. We recommend that you set the

thermostat thermostat to 3 (three)

and monitor the temperature to

ensure the appliance maintains

desired storage temperatures (See

section Temperature Control and

Adjustment).

7. Do not load the appliance

immediately it is switched on. Wait

until the correct storage temperature

has been reached.

8. We recommend that you check

the temperature with an accurate

thermometer

Water Dispenser

*optional

The water dispenser is a very useful

feature allowing cold water on tap

without opening the door of your

refrigerator .As you will not have to

open your refrigerator door frequently,

you will have saved energy.

Using the water dispenser

Push the lever of the water dispenser

with your glass. The dispenser will

cease operating once you release the

lever.

When operating the water dispenser,

maximum flow can be obtained

by pressing the lever fully. Please

remember that the amount of flow

from the dispenser is subject to the

degree you press the lever.

As the level of the water in your glass/

container rises, slightly lessen the

pressure on the lever to prevent the

overspill. If you slightly press the lever,

the water will drip; this is quite normal

and not a failure.

Filling the water dispenser's tank

Open the cover of the water tank as

shown in the figure. Fill in the pure and

clean drinking water. Close the cover.

To avoid flowing of water by mistake,

we recommend you to lock the water

dispenser .

Warning!

• Do not fill the water tank with any

other liquid except for water such as

fruit juices, carbonated beverages

or alcoholic drinks which are not

suitable to use in the water dispenser.

Water dispenser will be irreparably

damaged if these kinds of liquids are

used. Warranty does not cover such

usages. Some chemical substances

and additives contained in these

kinds of drinks/liquids may damage

the water tank.

• Use clean and pure drinking water

only.

• Capacity of the water tank is 2.2

Litres (3.8 pints); do not overfill.

• Push the lever of the water dispenser

with a rigid glass. If you are using

disposable plastic glasses, push the

lever with your fingers from behind

the glass.

Cleaning the water tank

Release the tank cover from the water

tank by opening latches at both sides.

Remove the water tank and clean with

warm and clean water. Place the water

tank to its seating, install the tank

cover and close the latches.

Make sure that the parts removed

(if any) during cleaning are properly

attached to their original places.

Otherwise, water leakage may occur.

Important:

Components of the water tank and

water dispenser should not be washed

in a dishwasher.

Water tray

Water that dripped while using the

water dispenser accumulates in the

spillage tray. Take out the strainer by

pulling it towards yourself and clear up

the water in the tray regularly.

5Using your refrigerator

Thermostat control

The thermostat control is located on

the top trim of the cooler.

Important:

When you adjust the set temperature,

there may be a short delay before the

compressor starts to operate. This is

normal and not a compressor fault.

Using interior compartments

Body shelves: Distance between the

shelves can be adjusted when neces-

sary.

Crisper: Vegetables and fruits can be

stored in this compartment for long

periods without decaying.

Bottle shelf: Bottles, jars and tins can

be placed in these shelves.

Chiller Compartment:

is ideal for storage of wrapped fresh

fish, meat and easily perishable food

like cooked chilled food.

Stopping your product

If your thermostat is equipped with “0”

position:

- Your product will stop operating

when you turn the thermostat button

to “0” (zero) position. Your product

will not start unless to you turn the

thermostat button to position “1” or

one of the other positions again.

If your thermostat is equipped with

“min” position:

- Unplug your product to stop it.

Cooling

Food storage

The fridge compartment is for the

short-term storage of fresh food and

drinks.

Store milk products in the intended

compartment in the cooler

Bottles can be stored in the bottle

holder or in the bottle shelf of the door.

Raw meat is best kept in a

polyethylene bag in the compartment

at the very bottom of the cooler.

Allow hot foods and beverages to cool

to room temperature prior to placing

them in the cooler.

•Attention

Store alcoholic spirits standing upright

and tightly closed.

•Attention

Do not store explosive substances or

containers with flammable propellant

gases (spray cans etc.) in the device.

There is a danger of explosion.

Placing the food

Egg tray Eggs

Fridge

compartment

shelves

Food in pans, covered

plates and closed

containers

Fridge

compartment door

shelves

Small and packaged

food or drinks (such

as milk, fruit juice and

beer)

Crisper Vegetables and fruits

Chiller

Compartment

Wrapped fresh sh,

meat and easily

perishable food

Defrosting of the appliance

The appliance defrosts automatically.

6Maintenance and cleaning

• We recommend that you switch off

the appliance at the socket outlet

and pull out the mains plug before

cleaning.

• Never use any sharp abrasive

instrument, soap, household

cleaner, detergent and wax polish for

cleaning.

• Use luke warm water to clean the

cabinet of the appliance and wipe it

dry.

• Use a damp cloth wrung out in

a solution of one teaspoon of

bicarbonate of soda to one pint of

water to clean the interior and wipe

it dry.

• Make sure that no water enters the

temperature control box.

• If the larder refrigerator is not going

to be used for a long period of time

switch it off, remove all food, clean it

and leave the door ajar.

• Any dust that gathers on the

condenser, which is located at the

back of the appliance, should be

removed once a year with a vacuum

cleaner.

• Check door seals regularly to ensure

they are clean and free from food

particles.

• Removal of door rack :

• To remove a door rack, remove all the

contents and then simply push the

door tray upwards from the base.

• Make sure that the special plastic

container (drain tray) at the back of

the appliance which collects defrost

water is clean at all times. If you want

to remove the tray to clean it follow

the instructions below :

• Switch off at the socket outlet and

pull out the mains plug.

• Push the lug down with the tip of a

screw driver & pull out firmly.

• Clean the drain tray and wipe it dry.

• Reassemble reversing the sequence

and operations.

Super Fresh Zone:

• Pull it out as far as possible and then

lift up and remove it completely.

Special Container

Compressor

7Do’s and Don’ts

Do- Clean your larder refrigerator

regularly.

Do- Keep raw meat and poultry below

cooked food and dairy products and

ideally in the super fresh zone.

Do- Keep food for as short a time as

possible and adhere to ‘Best Before’

and “Use By” dates.

Do- Take off any unusable leaves on

vegetables and wipe off any soil.

Do- Leave lettuce, cabbage, parsley

and cauliflower on the stem.

Do- Wrap cheese firstly in greaseproof

paper and then in a polythene bag

excluding as much air as possible.

Do- Wrap meat, fish and offal in

polythene bags.

Do- Wrap bread well to keep it fresh..

Do- Chill white wines, beer, lager and

mineral water before serving.

Do- Put Melon in your fridge. It can be

chilled for short periods as long as it

is wrapped to avoid it flavouring other

food.

Don't - Leave door open for long

periods as this will make the larder

refrigerator more costly to run.

Don't- Keep poisonous or any

dangerous substances in the larder

refrigerator.Your larder refrigerator

has been designed for the storage of

edible foodstuffs only.

Don't- Consume food which has been

stored for an excessive time in the

larder refrigerator.

Don't- Store cooked and fresh food

together in the same container. They

should be packaged and stored

separately..

Don't- Let defrosting food or food

juices drip onto food in your larder

refrigerator.

Problem Solvıng

If the appliance does not operate

when switched on, check whether:

• The plug is inserted properly in the

socket and that the power supply is

on. (To check the power supply to

the socket, plug in another appliance)

• The fuse has blown/circuit breaker

has tripped/main distribution switch

has been turned off.

• The temperature control has been set

correctly.

• New plug is wired correctly if you

have changed the fitted moulded

plug.

If the appliance is still not operating

after the above checks, please

refer to the section on “How To

Obtain Service”.

Please ensure that above checks

have been made as a charge will

be made if no fault is found.

HOW TO OBTAIN SERVICE

Please keep your purchase receipt or other proof of purchase in a safe

place; you will need to have it should the product require attention under

guarantee.

You should also complete the details below; it will help us assist you when

requesting service. (The model number is printed on the Instruction Booklet and

the serial number is printed on the Rating Label affixed to the appliance)

Model No: Serial No: Retailer: Date of purchase:

For service under guarantee simply telephone the appropriate number

below

UK Mainland & Northern Ireland

Fridges & Freezers 0845 6004903

Electric Cookers 0845 6004902

Gas & Dual Fuel Cookers 0845 6004905

Washing Machines 0845 6004906

& Dishwashers

Republic of Ireland

All Refrigeration, All Cookers 01 862 3411

Washing Machines & Dishwashers

Before requesting service please check the trouble-shooting guide in

the Operating Instructions as a charge may be levied where no fault is

found even though your product may still be under guarantee.

Service once the manufacturers guarantee has expired.

If you have purchased an extended guarantee please refer to the instructions

contained within the extended guarantee agreement document. Otherwise

please call the appropriate number above where service can be obtained at a

charge.

Should you experience any difficulty in obtaining service please contact the Beko

Customer Help-Line. Tel: 0845 6004911 e-mail: [email protected]

Table of contents

Other Beko Fridge manuals

Beko

Beko LXD 6145 B User manual

Beko LXD 6155 S Owner's manual