Bella D'Este CLAREMONT 4 IN 1 CRIB 0315S00GR User manual

MODEL #:
0315S00GR - RUBBED BLACK
DJ209B4 - COUNTRY SATIN
This instruction booklet contains
IMPORTANT safety information.
Please read and keep for future reference.
CLAREMONT 4 IN 1 CRIB
NOTE:
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace the
part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
ATTACH HERE
RECEIPT OF PURCHASE:
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
DATE OF PURCHASE:

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Follow warnings on all products in a crib.
WARNING ENTRAPMENT / STRANGULATION HAZARD:
*Infants have died in toddler beds from entrapment and strangulation.
*NEVER use bed with children under 15 months.
*NEVER place bed near windows where cords from blinds or drapes may strangle a child.
*
*
*
*
*
DO NOT suspend strings over a TODDLER BED or DAY BED for any reason.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES (69CM BY 131CM) WITH A MINIMUM THICKNESS OF 4 INCHES (10CM) BUT NOT
EXCEEDING 6 INCHES (15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
The TODDLER BED or DAY BED is not intended for children under 15 months of age or over 50
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid
the formation of a gap between the mattress and the bed that could cause an entrapment (when
product is used as a TODDLER BED or DAY BED).
DO NOT place DAY BED or TODDLER BED near windows where cords from blinds or drapes may
strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings or
pacifier cords.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on
loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.
When child is able to pull to standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could serve as steps for climbing out.
Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
DO NOT use a water mattress with this crib.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or
sharp edges, DO NOT use crib if any parts are missing or broken. Ask your dealer or write to our
customer service representative (address & phone number shown above) for replacement parts and
instructional literature if needed. DO NOT substitute parts.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional
padding under an infant.
When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be
used.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
Strings can cause strangulation! DO NOT place crib with a string around a child's neck, such as hood
strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
WARNING
Failure to follow these warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number, color
and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

*
*
*
*
*
*
CAUTION: Adult assembly required.
Assembly will require two people.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT
USE.
CARE AND CLEANING
LIMITED WARRANTY
Jardine Enterprise warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to the
repair or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to misuse
or abuse or which has been altered or repaired in any way. This warranty gives you specific legal
rights and you may also have other rights which vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage
wood furniture.
If the crib is to be stored, store in cool dry place and carefully package all original hardware to
protect from loss.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
NOTES
Ensure all parts and components are present before beginning assembly.
Assemble on soft, smooth surface to prevent damage to product finish.
Phillips head screw driver is not included.
DO NOT use power tools.

CLAREMONT 4 IN 1 CRIB
ALLEN KEY
1 PC
BOLT
2 PCS
RIGHT FRONT POST
1 PC
RIGHT END PANEL
1 PC
LEFT END PANEL
1 PC
HEAD BOARD
1 PC
MATTRESS SUPPORT
1 PC
FRONT PANEL
1 PC
LEFT FRONT POST
1 PC
GUARD RAIL
1 PC
BOLT
4 PCS
4 MM

When inserting bolts turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After crib is
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to
facilitate assembly.
CLAREMONT 4 IN 1 CRIB
STEP 1
Attach left end panel (A1) and right end panel (A2) to headboard (C) using bolts (2) and
bolt (3). Use Allen key (6) to tighten bolts.
NOTE: Posts (B1 & B2) are provided for future use of Day Bed. Please keep in a safe
location to avoid damages.
NOTE: Please ensure the top of the posts are flush with the top of curving rail on end
panels when tightening bolts.
C
A1
A2 2
3
2
2
3
2
6

STEP 2
INCORRECT
CLAREMONT 4 IN 1 CRIB
3
INCORRECT
CORRECT
Raised edge
should face
down -
this photo
shows
mattress
support is
upside down
Tabs on
corners
of mattress
support
should point
up
Flat surface of mattress
support to face up - mattress
must sit on flat surface
Tabs point up
Fasten mattress support (E) to the posts of right end panel (A2) and left end panel (A1) using
bolts (4) and Allen key (6). Ensure the mattress support is leveled and centered before
tightening all 4 bolts. Do not overtighten. Check bolts periodically and tighten if necessary.
NOTES: The mattress support tabbs should always be above the mattress support when
assembled (refer to detail 1).
Ensure all height adjustment holes are filled with appropriate bolts after mattress support has
been moved to desired level (refer to detail 2).
E
E
4
6

CLAREMONT 4 IN 1 CRIB
NOTE: Please make sure that the top of the post is flush with the top of curving rail on end panels
when tightening bolts.
4
3
STEP 3
Attach the front Panel (D) to end panels (A1 & (A2) using bolts (2) & (5 ). Use Allen key
(6) to tighten bolts.
5
26
C
DA1
A2
5

WARNINGS:
*The DAY BED is not intended for children under 15 months of age or over 50 pounds.
STEP 1: Detach the front panel (D) using Allen key (6).
STEP 3: Attach left front post (B1) and right front post (B2) to end panels (A1 & A2) with bolts (2&5)
and Allen key (6).
STEP 1: Follow step 1 and 2 of the crib assembly instruction.
CLAREMONT 4 IN 1 CRIB
STEP 4: Assemble guard rail (F) to front posts with bolts (1) and Allen key (6).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM SCRATCH
STEP 2: Follow step 2 to 4 for the day bed assembly instruction located above.
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB
STEP 2: Move the mattress support (E) to the lowest position by adjusting bolts with Allen key (6).
*Any mattress used in this day bed must be at least 27-1/4 inches by 51-5/8 inches (69cm by
131cm) with a minimum thickness of 4 inches (10cm) but not exceeding 6 inches (15cm).
5
5
C
B1
B2
A1
A2
26
C
A1
A2
B2
B1
F
E
1
6
16

Diagram 1
Assemble the full size conversion rails (not included) to the headboard (C )and the
front panel (D) as shown in diagram 1.
CLAREMONT 4 IN 1 CRIB
STEP 1
FULL SIZE CONVERSION RAILS ARE NOT INCLUDED. DIAGRAM 1 IS FOR
REFERENCE ONLY. BED RAILS MAY DIFFER FROM ILLUSTRATION.
I
I
J
H1
Headboard
Footboard
Headboard
SIDE RAIL
WOOD
SLAT
NOTE:
DIAGRAM 1
DIAGRAM 2
A

FULL SIZE CONVERSION RAILS AND LEGS ARE NOT INCLUDED. DIAGRAM 1 &
2 IS FOR REFERENCE ONLY. BED RAILS AND LEGS MAY DIFFER FROM
ILLUSTRATION.
CLAREMONT 4 IN 1 CRIB
STEP 2
STEP 1
Assemble the full size
conversion rails and
legs (not included) to
the headboard (C) .
IMPORTANT: Store unused parts of "crib", "day bed" or "full size bed" for future
C
C