Bella D'Este BIELLA BR235B4 User manual

CAUTION:
WARNING:
Carefully read instructions and
BR235B4 - ANTIQUE WHITE
Phillips screw-driver is not included
will require two people
DO NOT USE
and/or components are broken
BIELLA 4 IN 1 CRIB
NOTE:
Assembly of this product
MODEL #:
Should this product become damaged
procedures for safe operation
DO NOT RETURN PRODUCT TO THE
STORE.
If a part is missing or damaged, contact our
customer service department. We will replace
the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
ATTACH HERE
RECEIPT OF PURCHASE:
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
*
*
*
*
*
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number,
color and a detailed description of the part.
Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or
sharp edges, DO NOT use crib if any parts are missing or broken. Ask your dealer or write to our
customer service representative (address & phone number shown above) for replacement parts
and instructional literature if needed. DO NOT substitute parts.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional
padding under an infant.
When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer
be used.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to
sleep, unless otherwise advised by your physician.
E-MAIL: [email protected]
WARNING
Failure to follow these warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
When child is able to pull to standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could serve as steps for climbing out.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
Strings can cause strangulation! DO NOT place crib with a string around a child's neck, such as
hood strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing
on loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.

*
*
*
*
*
*Follow warnings on all products in a crib.
WARNING ENTRAPMENT / STRANGULATION HAZARD:
*Infants have died in toddler beds from entrapment and strangulation.
*NEVER use bed with children under 15 months.
*NEVER place bed near windows where cords from blinds or drapes may strangle a child.
*
*
*
*
*
*
*
Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
DO NOT use a water mattress with this crib.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
DO NOT place DAY BED or TODDLER BED near windows where cords from blinds or drapes
may strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings or
pacifier cords.
DO NOT suspend strings over a TODDLER BED or DAY BED for any reason.
NOTES
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-
5/8 INCHES (69CM BY 131CM) WITH A MINIMUM THICKNESS OF 4 INCHES (10CM) BUT NOT
EXCEEDING 6 INCHES (15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
The TODDLER BED or DAY BED is not intended for children under 15 months of age or over 50
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to
avoid the formation of a gap between the mattress and the bed that could cause an entrapment
(when product is used as a TODDLER BED or DAY BED).
Ensure all parts and components are present before beginning assembly.
Assemble on soft, smooth surface to prevent damage to product finish.

*
*
*
*
CAUTION: Adult assembly required.
Assembly will require two people.
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
CARE AND CLEANING
Phillips head screw driver is not included.
DO NOT use power tools.
LIMITED WARRANTY
Jardine Enterprise warrants its product to be free from defects in material and workmanship
and agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is solely
limited to the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way. This warranty
gives you specific legal rights and you may also have other rights which vary from State to
State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
If the crib is to be stored, store in cool dry place and carefully package all original hardware to
protect from loss.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.

Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number,
color and a detailed description of the part.
Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or
sharp edges, DO NOT use crib if any parts are missing or broken. Ask your dealer or write to our
customer service representative (address & phone number shown above) for replacement parts
and instructional literature if needed. DO NOT substitute parts.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional
padding under an infant.
When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer
be used.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to
sleep, unless otherwise advised by your physician.
E-MAIL: [e-mail]
WARNING
Failure to follow these warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
When child is able to pull to standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could serve as steps for climbing out.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
Strings can cause strangulation! DO NOT place crib with a string around a child's neck, such as
hood strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing
on loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.

WARNING ENTRAPMENT / STRANGULATION HAZARD:
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
DO NOT use a water mattress with this crib.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
DO NOT place DAY BED or TODDLER BED near windows where cords from blinds or drapes
may strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings or
pacifier cords.
DO NOT suspend strings over a TODDLER BED or DAY BED for any reason.
NOTES
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-
5/8 INCHES (69CM BY 131CM) WITH A MINIMUM THICKNESS OF 4 INCHES (10CM) BUT NOT
EXCEEDING 6 INCHES (15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
The TODDLER BED or DAY BED is not intended for children under 15 months of age or over 50
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to
avoid the formation of a gap between the mattress and the bed that could cause an entrapment
(when product is used as a TODDLER BED or DAY BED).
Ensure all parts and components are present before beginning assembly.
Assemble on soft, smooth surface to prevent damage to product finish.

CAUTION: Adult assembly required.
Assembly will require two people.
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
CARE AND CLEANING
Phillips head screw driver is not included.
DO NOT use power tools.
LIMITED WARRANTY
Jardine Enterprise warrants its product to be free from defects in material and workmanship
and agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is solely
limited to the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way. This warranty
gives you specific legal rights and you may also have other rights which vary from State to
State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
If the crib is to be stored, store in cool dry place and carefully package all original hardware to
protect from loss.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.

BIELLA 4-IN-1 CRIB
BR235B4 ANTIQUE WHITE
HARDWARE LIST
1
PARTS LIST
A
DE F
G
3
2
4
H
BC

Thank you for purchasing this quality product. Be sure to check all packing material carefully
for small parts, which may have come loose inside the carton during shipment. Identify and
count all parts and compare with the parts list.
NOTE: WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT. THEN LOOSEN
1/2-3/4 OF A TURN. AFTER CRIB IS COMPLETELY ASSEMBLED, RETURN TO EACH
SCREW AND TIGHTEN. USE WAX OR SOAP ON ALL SCREWS TO FACILITATE ASSEMBLY.
BIELLA 4-IN-1 CRIB
BR235B4 ANTIQUE WHITE
STEP 1:
ATTACH RIGHT FRONT POST (C) TO RIGHT
END PANEL (E) USING BOLTS (3). USE
ALLEN WRENCH (4) TO TIGHTEN BOLTS.
REPEAT TO ATTACH LEFT FRONT POST
(B) TO LEFT END PANEL (D).
NOTE: ENSURE TOP EDGE OF FRONT
POSTS ARE FLUSH WITH TOP EDGE OF
END PANELS WHEN TIGHTENING BOLTS.
STEP 2:
ATTACH THE RIGHT AND LEFT END
PANELS TO HEADBOARD (H) USING BOLTS
(3). USE ALLEN WRENCH (4) TO TIGHTEN
BOLTS.

STEP 3:
BIELLA 4-IN-1 CRIB
BR235B4 ANTIQUE WHITE
Attach the mattress support to the 4 corner posts with the mattress support bolts (2). Use
Allen Key to tighten bolts. Refer to details 1 and 2 for direction on how to properly attach
the mattress support.
INCORRECT-
Tabs on corners
of mattress
support should
point up
INCORRECT-
Raised edge
should face
down -this
photo shows
mattress
support is
upside down
CORRECT
*Tabs to point UP.
*Flat surface of mattress support to face
up - mattress must sit on flat surface.
G
G
G
N

STEP 4
ATTACH THE FRONT PANEL (F) TO FRONT POSTS (B) AND (C) USING
BOLTS (1). USE ALLEN WRENCH (4) PROVIDED TO TIGHTEN BOLTS.
BIELLA 4-IN-1 CRIB
BR235B4 ANTIQUE WHITE
NOTE: THE MATRESS
4
C
BF
1
1
1
1

WARNINGS:
1. ANY MATTRESS USED IN THIS DAY BED MUST BE AT LEAST 27-1/4" × 51-5/8" (69CM × 131CM) WITH
A MINIMUM THICKNESS OF 4" AND NOT EXCEEDING 6" (15CM).
2. THE DAY BED IS INTENDED FOR USE BY A CHILD NOT LESS THAN 15 MONTHS
OF AGE AND WHO WEIGHS NO MORE THAN 50LBS (22.7KGS)
DAY BED ASSEMBLY INSTRUCTIONS, STARTING FROM CRIB
STEP 1: DETACH THE FRONT PANEL (F) FROM THE FRONT POSTS (B) AND ©
USING ALLEN WRENCH (4).
STEP 2: IF MATTRESS SUPPORT (G) IS NOT IN THE LOWEST POSITION, UNSCREW
MATTRESS SUPPORT BOLTS (2) FROM POSTS AND MOVE IT TO THE LOWEST POSITION.
NOTE: PLEASE ENSURE THAT THE HEIGHT ADJUSTMENT HOLES ARE FILLED
WITH SCREWS (2) AFTER THE MATTRESS SUPPORT HAS BEEN MOVED TO THE
LOWEST LEVEL. MAKE SURE THAT THESE SCREWS ARE TIGHTLY SECURED.
STEP 3: USING THE WRENCH (4) PROVIDED, ATTACH THE GUARD RAIL (A)
USING 4 BOLTS (1) BETWEEN THE LEFT AND RIGHT FRONT POSTS.
STARTING FROM SCRATCH:
STEP 1: FOLLOW STEPS 1 TO 3 OF THE CRIB ASSEMBLY INSTRUCTIONS.
STEP 2: FOLLOW STEPS 2 TO 4 FOR THE DAY BED ASSEMBLY INSTRUCTIONS LOCATED
ABOVE (STARTING FROM CRIB).
BR235B4 ANTIQUE WHITE
BIELLA 4-IN-1 CRIB

BIELLA 4-IN-1 CRIB
BR235B4 ANTIQUE WHITE
FULL SIZE CONVERSION RAILS ARE NOT INCLUDED. DIAGRAM 2
IS FOR REFERENCE ONLY.
STEP 1: ASSEMBLE THE FRONT POSTS (B & C) TO THE FRONT PANEL (F)
USING BOLTS (1), AS SHOWN IN DIAGRAM 1.
STEP 2: ASSEMBLE THE FULL SIZE CONVERSION RAILS (NOT INCLUDED) TO THE
HEADBOARD (H) AND THE FOOTBOARD ASSEMBLY, AS SHOWN
IN DIAGRAM 2.
I
I
J
H1
Headboard
Footboard
Headboard
SIDE RAIL
WOOD SCREWS
SLAT
NOTE:
DIAGRAM 1
DIAGRAM 2
A
DIAGRAM 2
HEADBOARD
FOOTBOARD

BIELLA 4-IN-1 CRIB
FULL SIZE BED WITH HEADBOARD ONLY ASSEMBLY
STEP 2
STEP 1
Assemble the full size conversion rails and
legs (not included) to the headboard (H) .
IMPORTANT: Store unused parts of "crib", "day bed" or "full size bed" for future convert purpose.
FULL SIZE CONVERSION RAILS AND LEGS ARE NOT INCLUDED. DIAGRAM 1 & 2 IS
FOR REFERENCE ONLY.BED RAILS AND LEGS MAY DIFFER FROM ILLUSTRATION.
H
H