Belvedere Olymp HairMaster User manual

GB
User Instructions HairMaster®| 751 250 29
Device description
Schematic representations on the interior
Overview of the HairMaster®A HairMaster®, mounted on the support arm system, including:
1one horizontally rotatable extension arm and
2one height-adjustable spring arm. Both support arms are equipped with
friction brakes which keep the device stable at the adjusted position.
B HairMaster®in telescopic tube version including:
3Radiant heater with fan (main heating).
4Side arms with integrated lateral radiant heaters; the height of the
two side arms can be adjusted individually.
5The Infrared sensor for the detection of temperature deviations of
more than 2 °C transmits an acoustic and a visual signal if the
customer's seating position is not optimal.
6Mains cable with mains plug for connection to the mains, hooked into
the mains cable bracket.
7Telescopic tube, extensible to a maximum height of 1,625 mm.
8Fastening screw for setting the telescopic tube to the desired height
position.
9Column tube with gas pressure spring (for compensating the weight
of the dryer).
aFoot base, tilt-resistant 4- or 5-arm star base with rollers.
bCustomer pushbutton for lowering the treatment temperature. With
temperatures of more than 40 °C, pressing the customer pushbutton
reduces the temperature by 5 °C.
cDisplay for the control of programs and menus.
dEasy Control Wheel for program control.
eSlot for SD card.
fON/OFF switch (master switch).
gSD card for the transmission of updates.
hRating plate (at the bottom of the device).
Schematic representations on the hinged side
Mode of operation program control The Turn and Push program control operates according to the following
principle:
•Scrolling - the menus,
•Highlighting - a property, a value or a function key,
•Activating - the selection.
The program control on the control panel i is operated by means of the
Easy Control Wheel k. The menus of the program control are shown on
the display j.
Turn, the rotary motions control the following two functions:
• To scroll and highlight items:
– Turn the wheel to the right - clockwise rotation m - to scroll down
the different menu levels for selecting the desired property, value
or a function key.
– Turn the wheel to the left - counter-clockwise rotation l- to
scroll back to the main menu.
Push the Easy Control Wheel kto control the following function:
• Activation of the selection.
_GA_HairMaster_GB.book Seite 29 Donnerstag, 6. September 2012 10:09 10

GB
User Instructions HairMaster®| 751 250 30
Thank you very much
Thank you very much for purchasing the new HairMaster®.
Please read this instruction manual very carefully, abide by the safety
notices and observe all operating and cleaning requirements.
This instruction manual is an integral part of the device. Do not hand over
this device to other users without this device documentation.
The instruction manual must be available at all times to all users. Always
keep the documentation next to the device.
Please do not hesitate to contact our customer service team:
• if you have questions about the device and its use,
• to reorder accessories,
• in service or warranty cases.
You can reach us at the following address:
Postal address of the main office OLYMP GmbH &Co. KG
Hohenheimer Straße 91-97
D-70184 Stuttgart
Germany
Sales P. O. Box 10 36 63, D-70031 Stuttgart
Phone [phone]
Fax [phone]
e-mail [email protected]
Postal address of our customer
service
OLYMP-Kundendienst
Siemensstraße 1
D-71711 Murr
Germany
Service Phone [phone]
Fax [phone]
e-mail [email protected]
Visit us on the Internet www.olymp.de
Device identification data:
Device identification Device designation: Hair dryer
Type designation: HairMaster®
Devices with serial number (or higher): 3 000 001
Certification Conformity: CE conformity marking
Conformity mark: GS
© OLYMP 2012
Edition: 08/12, Version 2
_GA_HairMaster_GB.book Seite 30 Donnerstag, 6. September 2012 10:09 10

GB
User Instructions HairMaster®| 751 250 31
Notes on this document
Target group: Qualified personnel This instruction manual is intended for qualified personnel familiar with the
treatment of hair as a result of their professional training (in countries
where certification is required based on legal regulations, qualified
personnel must have been awarded the related certificate).
Although the hair dryer corresponds to the state of the art and is safe to
operate, it must be considered a potential source of danger, in particular
when operated by insufficiently trained personnel or used improperly and
not as prescribed.
Personnel working with this device must be instructed in its operation,
cleaning and care based on this instruction manual.
Original document / translations The contents of this instruction manual are subject to change without prior
notice. In case of translations into foreign languages, the German version of
this instruction manual shall take precedence.
Copyright This instruction manual is protected by copyright law. Any reproduction,
and in particular the reprint, further photomechanial or digital processing
or duplication of this document or parts thereof is strictly prohibited
without the express consent written consent of OLYMP GmbH &Co. KG.
Trademarks HairMaster® is a registered trademark of OLYMP.
All trademarks mentioned in this instruction manual are the sole and
exclusive property of the corresponding manufacturer.
Warranty conditions The warranty of OLYMP for the safety and operational reliability
of the device is subject to the following conditions:
• The device is used exclusively as prescribed and operated, maintained
and repaired as stipulated in this instruction manual.
• No structural alterations are made on the device. No modifications or
conversions are performed without authorization. Otherwise, the
manufacturer's warranty for this device may be void.
• Only spare parts and accessories authorized by OLYMP are used.
The warranty period starts from the date of delivery to the customer.
_GA_HairMaster_GB.book Seite 31 Donnerstag, 6. September 2012 10:09 10

Contents
GB
User Instructions HairMaster®| 751 250 32
1 Your safety is important to us 33
1.1 Prescribed Use ..................................................................................................... 33
1.2 Incorrect Use ........................................................................................................ 33
1.3 Explanation of the Safety Instructions and Pictograms ..................................... 34
1.3.1 Safety Instructions and Pictograms Used in the Instruction Manual........... 34
1.3.2 Pictograms Complementing the Safety Instructions.................................... 34
1.3.3 Symbols on the Device.................................................................................. 34
1.4 Overview of the Safety Instructions .................................................................... 35
2 Putting the Device into Operation 38
2.1 Packaging Materials ............................................................................................. 38
2.2 Scope of Supply................................................................................................... 38
2.3 Mounting the Device............................................................................................ 39
2.4 Positioning the Device for Hair Treatment.......................................................... 40
2.5 Connecting the Device to the Mains ................................................................... 40
2.6 Switching the Device On and Off ........................................................................ 41
2.7 Actuating the customer pushbutton ................................................................... 41
2.8 Function of the infrared sensor ........................................................................... 41
2.9 Defining the User Interface Language................................................................. 42
3 Programs and Program Control 43
3.1 Description of the Programs................................................................................ 43
3.1.1 Hair Treatment Programs .............................................................................. 43
3.1.2 Service programs........................................................................................... 44
3.1.3 Messages........................................................................................................ 45
3.2 Operation of the Programs .................................................................................. 47
4 Care and Maintenance 49
4.1 Cleaning................................................................................................................ 49
4.1.1 Cleaning the Surfaces .................................................................................... 49
4.1.2 Cleaning the Rollers and Bearings ................................................................ 50
4.2 Replacing the Filter............................................................................................... 50
4.3 Replacing the radiant heater................................................................................ 51
5 Accessories 53
6 Technical Data 54
_GA_HairMaster_GB.book Seite 32 Donnerstag, 6. September 2012 10:09 10

GB
User Instructions HairMaster®| 751 250 33
1 Your safety is important to us
1.1 Prescribed Use
Use as prescribed HairMaster®is a hairdressing device for the heat treatment and drying of
the hair on the customer's head.
• The selection of the treatment time and temperature is the sole
responsibility of the qualified hairdressing personnel.
• The device can be used to support the treatment of hair with special
cosmetic hair products. The manufacturer's instructions of the products
used must be strictly observed. Furthermore, it must be considered
that the exposure period of products can be significantly reduced under
heat treatment.
• For proper hair treatment, the device must be positioned in such a way
that the customer's head is at a sufficient distance from all radiant
heaters.
• Do not leave the device unattended during operation. Particular
attention is required for the treatment of the hair of children or frail
persons.
• Switch off the ON/OFF switch immediately after the treatment and pull
out the mains plug (only for the device in standing version).
Ambient conditions The device is intended for commercial use inside a building.
• The ambient room temperature must be in a range between 15 °C and
35 °C.
• The relative humidity must not exceed 95%.
• Do not expose the device to direct sunlight and do not install it close to
other devices with high heat emission or in moist rooms.
Mains protection Socket outlets with grounding contact (Schuko sockets) for the connection
of the device to the mains must be fused with at least 10 A. We recommend
the protection of the power circuits in your hairdressing salon with a
residual-current operated device.
1.2 Incorrect Use
Incorrect use The device is designed exclusively for the treatment of the hair on one's
head. The face and other parts of the body must not be included in the
treatment.
• Do not apply ointments with ingredients stimulating blood circulation
or similar substances on the skin, because the heat dissipation of the
device can lead to uncontrolled effects on these products.
• Do not cover the device with towels or foil during operation. For wave
treatment, do not cover the hair with a cloth, hood, plastic film or
aluminum foil.
• Inflammable mousse products, sprays, gases or easily inflammable
substances must not drop on the radiant heaters and must not be used
close to the device.
• Do not use the device for the treatment of animals.
• Do not use the device for the drying or heating of objects or food.
_GA_HairMaster_GB.book Seite 33 Donnerstag, 6. September 2012 10:09 10

1 Your safety is important to us
GB
User Instructions HairMaster®| 751 250 34
1.3 Explanation of the Safety Instructions and Pictograms
1.3.1 Safety Instructions and Pictograms Used in the Instruction
Manual
WARNING: Damage to persons
Refers to a dangerous situation which, if not avoided, can lead
to death or severe injury.
CAUTION: Damage to persons
Refers to a potentially dangerous situation which, if not
avoided, leads to minor or slight injury.
NOTICE: Damage to property
Refers to a situation which, if not avoided, leads to damage to
property.
NOTE: Useful information
Provides additional information and useful tips for the use of
the device.
1.3.2 Pictograms Complementing the Safety Instructions
Electric shock!
Danger of fire!
Hot surface!
Load-bearing capacity!
1.3.3 Symbols on the Device
CE conformity marking
WEEE disposal of old electrical and electronic equipment
_GA_HairMaster_GB.book Seite 34 Donnerstag, 6. September 2012 10:09 10

1 Your safety is important to us
GB
User Instructions HairMaster®| 751 250 35
1.4 Overview of the Safety Instructions
Read these safety instructions very carefully before the first use of the
device.
• These instructions help you to protect yourself and other persons
against potential hazards and prevent damage to the device.
Electric shock!
Electric shock Contact with energized components presents a danger to life
from electric shock.
Water is a very good electrical conductor. As long as the device
is connected to the mains, electrical components remain
energized even after switching off the device using the ON/OFF
switch. The following safety instructions must be strictly
observed:
• Avoid operating the device with wet hands.
• Do not immerse the device in water or other liquids and
protect it against splashing.
• If an energized device falls into water, keep your hands out
of the water and pull out the mains plug immediately.
• Do not place the device near sanitary facilities (sinks, tubs).
• Do not use the device when in the bath.
• Do not insert metal or conductive objects (e.g. sticks or
pens) into the openings or joints of the device housing.
• After use of the device, pull out the mains plug immediately.
• Before cleaning the device, pull out the mains plug.
Danger of fire!
Danger of fire The radiant heaters of the heating system heat up the surfaces
in such a way that they can ignite easily inflammable materials.
• Make sure that no hair comes into contact with the radiant
heaters.
• Do not cover the device during operation. Do not place any
hygienic or auxiliary materials (towels and paper tissues,
foils, tulle capes, etc.) on the device.
• Avoid using any inflammable products or materials (sprays,
mousse products, etc.) near the device.
_GA_HairMaster_GB.book Seite 35 Donnerstag, 6. September 2012 10:09 10

1 Your safety is important to us
GB
User Instructions HairMaster®| 751 250 36
Shooting up of the spring arm!
Elastic force of the spring arm The spring arm of the wall-mounted version / special
attachments is under pressure. If the dryer is removed from the
spring arm, the spring arm may shoot up and lead to injury.
• The dryer must solely be mounted and dismounted by
qualified personnel in accordance with the valid mounting
instruction.
Shooting up of the telescopic tube!
The telescopic tube is under spring pressure. When the
fastening screw is loosened, the telescopic tube may shoot up
and lead to injury.
• The fastening screw of the telescopic tube may only be
loosened if the dryer is mounted and attached to the column
tube.
Defective device!
Defective device If the device or parts thereof have been damaged, a functional
test must be performed by authorized personnel before putting
it back into operation. This is particularly important in the
following cases:
• The device does not operate properly.
• The mains cable or mains plug are damaged.
• The device was damaged by breakage or shock.
• Liquid or foreign bodies have got inside the device.
Risk of burns!
Risk of burns The radiant heaters of the heating system heat up the surfaces
in such a way that contact with skin may lead to burns.
Do not touch the radiant heaters or heated protective grids
during or immediately after operation.
Unauthorized use!
The device should not be operated by unauthorized persons.
In particular, its use by the following persons (including child-
ren) must be prevented:
• Persons who do not have the experience or knowledge
required for operating hairdressing devices,
• persons with limited physical, sensory or mental capacity,
unless supervised by a person responsible for their safety, or
receiving operating instructions by such person.
• Never leave children unattended in rooms where the device
is operated so as to prevent them from playing with it.
_GA_HairMaster_GB.book Seite 36 Donnerstag, 6. September 2012 10:09 10

1 Your safety is important to us
GB
User Instructions HairMaster®| 751 250 37
Load-bearing capacity of the wall bracket!
Load-bearing capacity of the wall
bracket
The load-bearing capacity of the wall bracket is restricted to
the weight of the device.
Do not attach any additional loads to the wall bracket.
_GA_HairMaster_GB.book Seite 37 Donnerstag, 6. September 2012 10:09 10

User Instructions HairMaster®| 751 250 38
GB
2 Putting the Device into Operation
2.1 Packaging Materials
We recommend keeping the packaging for possible
returns during the warranty period.
After this time, all packaging materials can be
disposed of as prescribed (recycling).
2.2 Scope of Supply
Check first whether all device components are present
and in good condition.
The scope of supply of the HairMaster®includes the
device components, fastening elements, tools and
documents:
Device components:
• HairMaster®1, cpl. with 5 filter gauzes
• Column tube 4, consisting of:
– Fastening screw 3,
– Telescopic tube 2,
– Plastic bearing 5,
• Star base 6with 4 or 5 rollers.
Fastening elements and tools:
• Hexagon socket wrench (Allen key) 7,
• Hexagon socket screw (Allen screw) 8with disk
9,
• Cable bracket a,
• Roller lever b,
• Locking screw c.
Documents:
• Instruction manual.
If the delivery is incomplete or the device or packaging
have been damaged in transit, contact your
forwarding agent and the OLYMP customer service
immediately.
_GA_HairMaster_GB.book Seite 38 Donnerstag, 6. September 2012 10:09 10

2 Putting the Device into Operation
User Instructions HairMaster®| 751 250 39
GB
2.3 Mounting the Device
1. Insert the column tube 3 into the hole in the star
base 5 and then push it up against the plastic
bearing 4.
Shooting up of the telescopic tube!
The telescopic tube 1is under spring
pressure.
When the fastening screw 2is loosened,
the telescopic tube may shoot up and lead
to injury.
When loosening the fastening screw 2,
keep a sufficiently safe distance from the
telescopic tube.
2. Fasten the column tube to the bottom of the star
base.
– Place the disk 8 on the column tube hole of
the star base,
– Using the hexagon socket wrench (Allen key)
6 , insert and fasten the screw 7 in the
column tube.
3. Insert the pivot of the dryer 9into the telescopic
tube 1.
4. To fasten the dryer in the telescopic tube:
– Insert the screw d through the drill hole c
on the telescopic tube into the pivot and then
fasten the screw.
5. Insert the cable bracket a into the telescopic
tube. Insert the two ends of the cable bracket into
the drill holes b of the telescopic tube. The cable
bracket is fastened through internal tension; to
insert the cable bracket, push the two ends apart.
_GA_HairMaster_GB.book Seite 39 Donnerstag, 6. September 2012 10:09 10

2 Putting the Device into Operation
User Instructions HairMaster®| 751 250 40
GB
2.4 Positioning the Device for Hair
Treatment
When positioning the device for hair treatment, make
sure that:
• the distance Dbetween the head and the two side
arms is equal,
• the distance Hfrom the head to the heater
protective grid of the HairMaster®is at least 8 cm
on all sides.
1. To adjust the lateral position:
–Standing version: Move the device on the
rollers.
–Wall-mounted version: Adjust the swivel arm
and the spring arm in horizontal position.
2. To adjust the height position:
–Standing version: Loosen the fastening screw
2(turn in counter-clockwise direction) and
adjust the telescopic tube 1 to the correct
height position.
– Tighten the fastening screw 2 (turn in
clockwise direction).
–Wall-mounted version: Adjust the vertical
position of the spring arm.
2.5 Connecting the Device to the Mains
1. Perform the following checks before connecting
the device to the mains:
– Check the grounding pin plug (Schuko plug)
3 and the power cable for damage. Do not
use damaged electrical parts for mains
connection!
– Check the information on the rating plate of the
device. The device must not be connected if
the voltage (V) and the maximum current (A)
indicated on the rating plate do not correspond
to the values of the mains.
2. Plug the grounding pin plug (Schuko plug) 3of
the power cable into a properly grounded and
fused socket (only in standing version).
3. Make sure that the power cable is not exposed to
tensile or compressive forces and that the power
cable is laid in such a way that it does not present
a trip hazard.
_GA_HairMaster_GB.book Seite 40 Donnerstag, 6. September 2012 10:09 10

2 Putting the Device into Operation
User Instructions HairMaster®| 751 250 41
GB
2.6 Switching the Device On and Off
1. To switch on the device: Switch the ON/OFF
switch 3 to I.
2. The program control runs the start routine; the
programs are loaded:
– This procedure takes a few seconds. The
product logo and the progress bar showing the
loading state appear on the display.
– The main menu is shown on the display as
soon as loading has been completed
successfully.
3. To switch off the device: Switch the ON/OFF
switch 3 to O.
4. Remove the grounding pin plug (Schuko plug)
from the socket (only in standing version).
2.7 Actuating the customer pushbutton
The customer pushbutton 1serves for reducing the
temperature set for the following hair treatment pro-
grams: Waving, Drying and Care
Treatment. With temperatures of more than 40 °C,
pressing the customer pushbutton reduces the tempe-
rature by 5 °C. With the Waving hair treatment pro-
gram, the exposure time is automatically adjusted to
the reduced temperature.
• Press the customer pushbutton 1.
When pressing the customer pushbutton, it
lights up and the corresponding symbol is
shown on the display. This process cannot be
undone while the program is in progress.
2.8 Function of the infrared sensor
The infrared sensor 2controls and adjusts the
temperature set for hair treatment. If the customer’s
seating position is not correct, the temperature around
the hair may drop.
The infrared sensor recognizes a temperature
deviation of more than 2 °C and issues a warning
accompanied by an acoustic signal. The warning 4
can be acknowledged in order to remove it:
Highlight the OK 5function key and then
press PUSH to activate it.
_GA_HairMaster_GB.book Seite 41 Donnerstag, 6. September 2012 10:09 10

2 Putting the Device into Operation
GB
User Instructions HairMaster®| 751 250 42
2.9 Defining the User Interface Language
Language setting By default, the user interface of the device shows different languages.
In the DEFAULT SETTINGS / LANGUAGE menu, the user can specify the desired
language of the user interface texts.
On the user interface, the user can now:
• perform additional settings for individual device configuration,
• select, adjust and start the hair treatment programs.
_GA_HairMaster_GB.book Seite 42 Donnerstag, 6. September 2012 10:09 10

GB
User Instructions HairMaster®| 751 250 43
3 Programs and Program Control
3.1 Description of the Programs
The program control includes two different types of programs (see
overview):
• Hair treatment programs:
–Quickstart,
–Waving,
– Coloring,
–Drying,
– Care treatment.
•Serviceprograms:
– Default settings.
3.1.1 Hair Treatment Programs
The HairMaster®provides a range of standard hair treatment programs.
Based on the individual settings defined, the hair treatment programs
calculate the optimal treatment time and the ideal temperature.
Product-specific programs or individually designed programs can be read
out from an SD card and loaded into the program control.
Quick start:
Quick start is a simple multi-function program. It controls all radiant heaters
and also provides the option of changing the settings during operation:
• Processing (exposure) time,
• Fan power,
• Treatment temperature.
Waving:
Permanent wave diagnostic program The permanent wave program permanently alters the structure of the
customer's hair. A specific diagnostic program calculates the optimal
treatment time and the ideal temperature. The following types of
permanent waves can be selected: acid, neutral or mild-alkaline.
Coloring:
Color diagnostic program After specifying the hair structure and state, the HairMaster®color
diagnostic program calculates the optimal temperature and treatment time
for brilliant results in terms of coloring or tinting all the hair or bleaching or
coloring individual strands of hair.
Drying:
The drying program provides for the fast, gentle and even drying of the
hair. To dry long hair, the side arms are folded down, thus activating the
specific neck heating.
Furthermore, the drying program provides the option of modifying the
settings for the combination of the radiant heaters, for the fan power, the
temperature and the exposure time even after the start of the program.
If the fan was used for drying, the exposure time is followed by a cool-down
period of one minute without heating, at the lowest fan level.
Care treatment:
Care treatment program Thanks to its homogeneous and constant heat profile, the HairMaster®
reaches all parts of the hair and thus provides for best possible
_GA_HairMaster_GB.book Seite 43 Donnerstag, 6. September 2012 10:09 10

3 Programs and Program Control
GB
User Instructions HairMaster®| 751 250 44
effectiveness and healthy hair.
3.1.2 Service programs
The service programs serve for device configuration and for the testing of
different device functions. The Default Settings menu item provides a list of
options for the adjustment of the device to an individual user profile.
Country:
Creates a pre-selection of the languages available for a country. The menu
display language can be selected from the pre-selection.
Language:
Selecting the language for the menu designations of the program control.
Quick start:
This option specifies the pre-settings of the Quick Start hair treatment
program .
Contrast:
Option for the setting of the display color contrast.
Sound:
Option for the selection of music styles: Wellness, Club, Classic, Latin,
Silhouette and Tone.
– Program sound (program start and program ending):
Adjusting of sound volume
– start sound (boot sound):
Adjusting of sound volume
Service:
This menu provides test functions for checking the device units. Functional
tests must be performed by the OLYMP customer service.
_GA_HairMaster_GB.book Seite 44 Donnerstag, 6. September 2012 10:09 10

3 Programs and Program Control
GB
User Instructions HairMaster®| 751 250 45
3.1.3 Messages
The following two types of messages are shown during operation:
•Notes,
• Error message or warnings.
Notes:
Notes The program control of the HairMaster®displays messages while the hair
treatment programs are in progress:
•Astext information shown.
•Asashort signal sound at the starting up of the device, the start of the
program and the end of the program.
•Asavisual signal shown as color shade on the light ring of the Easy
Control Wheel. The color shades have the following significance:
– Permanent blue light: The device is in standby mode.
– Permanent red light: Program including heat treatment.
– Permanent green light: The program is finished or can be
continued for further treatment.
– Blinking red light: Announces the end of the program.
Error message:
Error message If the heating system fails during operation, an error message is
transmitted as an acoustic or visual signal:
•Astext information describing the cause of the problem: e.g.
temperature too high.
•Asacontinuous sound signal which cannot be switched off.
•Asavisual signal, blinking violet light, shown on the light ring of the
Easy Control Wheel.
Continuous sound signal!
If an error message is signaled by a continuous sound signal,
the device must be switched off and put out of operation.
• The device can no longer be used for hair treatment.
• Please contact the OLYMP customer service.
Warnings:
Warnings Warnings show an event for which the error which caused it should be
removed immediately or at least as soon as possible. For example, the
customer's seating position must be corrected, because the temperature
sensor is outside the permissible range or because a service is due, e.g.
replacing of the filter.
_GA_HairMaster_GB.book Seite 45 Donnerstag, 6. September 2012 10:09 10

3 Programs and Program Control
User Instructions HairMaster®| 751 250 46
GB
Warnings are shown as combined picture/text
information 1 and must be acknowledged in order to
be able to continue the hair treatment program.
To acknowledge and deactivate the warning:
Highlight the OK 2 function key and then
press PUSH to activate it.
The hair treatment program can be continued
as soon as the display window closes.
_GA_HairMaster_GB.book Seite 46 Donnerstag, 6. September 2012 10:09 10