Benchmark USA 26 Gallon Tortilla Chip Warmer User manual

OWNERS MANUAL
MODEL:
26GallonTortillaChipWarmer
Professional Chip Warmer
PART NUMBER:
51026
115 volts, 60 hz
WARNING: Handling the cord on this product may expose you to lead, a chemical known to the State Of California to
cause cancer and birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.
Electrical ground is required on this appliance.
1. Do not modify the power supply cord plug. If it does not fit the outlet, have a proper outlet installed by a
qualified electrician.
2. Do not use an extension cord with this appliance.
3. Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded.
SAFETY INSTRUCTIONS
1. Plug electrical cord into a certified electrical outlet with a corresponding voltage rating as listed on the
machine model labels.
2. Always unplug the electric cord when appliance is not in use and before cleaning, adjusting or maintaining
this steamer. Do not operate with a damaged cord or plug or after the machine malfunctions, has been
dropped or damaged. Use authorized service for examination, electrical or mechanical adjustment or repair.
3 This equipment will be HOT during use and for a short time after it is turned off. BE CAREFUL. To avoid
burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep
combustible materials away from appliance.
4. Extreme caution is necessary when any appliance is used by or near children and whenever the appliance is
left operating and unattended.
5. This appliance is not intended for use in wet locations. Never locate appliance where it may fall into a water
container.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an
electrical shock, fire or damage to the appliance.
Benchmark USA Inc. ● 25-J Brookfield Oaks Dr. ● Greenville, SC 29607 ● T: 864-312-5500 ● F: 864-312-5505
WARNING ELECTRICAL SHOCK HAZARD.
AILURE TO FOLLOW
THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

Assembly Instructions
1. Remove any packaging materials.
2. Locate 4 Legs (p/n 6706) and install them on the underside of the Chip Warmer.
3. It is recommended to clean the Chip Warmer inside and out before initial use.
Diagram
Operating Instructions
1. Plug the machine into a properly grounded 120 volt outlet.
2. Turn on the warming element with the front lighted switch.
3. Set the thermostat to High until the temperature indicator reaches the desired temperature.
4. Fill the Chip Warmer with up to 26 gallons of tortilla chips through the fill doors.
5. Adjust the thermostat accordingly to maintain the desired temperature.
6. Begin serving warm chips through the lower drop door.
7. Continue to load the machine with product through the fill doors.
8. Turn off machine when not in use.
Page 2
Cleaning

1. Turn off the machine and unplug it from the power source.
2. Remove any remaining food product from the cabinet.
3. Open front door panel and remove the product tray from the warmer and clean in a sink or
dishwasher with mild detergent.
4. Clean out any food product from the base of unit with a damp cloth and mild detergent.
5. Clean the stainless steel cabinet panels with damp cloth and mild detergent.
6. Return the product tray to the bottom of warmer.
7. Plug the machine back into the 120 volt power source.
Wiring Diagram
Parts List
Part #
Description
Part #
Description
5240
Left Fill Door
5253
120V-24VDC converter
5241
Right Fill Door
5254
Front Door Panel
5242
Top Panel
5255
Drop Door
5243
Product Tray
5256
Drop Door Hinge Set
5244
Left Panel
5257
Door Clamps
5245
Back Panel
5258
Front Door Hinge Set
5246
120V Fan Motor
5259
Digital Temperature Indicator
5247
Heating Element
5260
Temperature Limiter
5248
Electrical Cover
2001
On/Off Switch
5249
Right Panel
0085
Adjustable Thermostat
5250
Chassis
6706
Leg
5251
Control Panel chassis
4020C
Fill Door Hinge Set
5252
Bottom Panel
2009
Power Cord
To Order Parts Contact:
Benchmark USA Inc. ● 25-J Brookfield Oaks Dr. ● Greenville, SC 29607 ● T: 864-312-5500 ● F: 864-312-5505
[e-mail]

Three Year Warranty
THE WARRANTY:
Benchmark USA warrants the original purchaser of new food equipment manufactured by
Benchmark USAto be free from defects in material or workmanship from the date of the original
purchase for a period of three years.
WHO IS COVERED BY THIS WARRANTY:
The original purchaser who has provided proper proof of the original retail purchase and all other
requested information.
WHAT IS WARRANTIED:
The obligation of Benchmark USA under this warranty is limited to the replacement of any parts
or components that in the opinion of Benchmark USA are defective, F.O.B. the factory, or at any
other location that Benchmark USA may designate.
WHAT VOIDS THE WARRANTY:
1. Any piece of equipment that has been installed, operated or maintained inconsistently
with Benchmark USAoperating instructions.
2. Any part or component that has been modified, changed or altered from its original
configuration.
3. Any electrical component that has been damaged due to submergence in any
liquid.
4. Any part or component that has been subject to abuse, misuse, neglect or
accidents.
EXTENT OF WARRANTY:
Any defective component, part or assembly returned to Benchmark USA will be replaced by
Benchmark USA. Benchmark USA will not be responsible for any expenses incurred by the
customer under the terms of this warranty, nor shall it be responsible for any damages either
consequential, special, contingent, or otherwise; or expenses or injury arising directly or
indirectly from the use of a Benchmark USAproduct. Any component, part or assembly returned
to Benchmark USA must be returned at the customers expense along with proof of purchase.
Benchmark USA reserves the right to determine whether the terms of this warranty have been
properly complied with. In the event that the terms are not complied with, Benchmark USAshall
be under no obligation to honor this warranty.
Benchmark USA Inc. ● 25-J Brookfield Oaks Dr. ● Greenville, SC 29607 ● T: 864-312-5500 ● F: 864-312-5505