Beneston VCF-1002DA-P User manual

1
User Manual
SD/HD-SDI 1 to 2 Distribution Amplifier
VCF-1002DA-P
NOTE: The casing design is subject to change
without notice.
Our SD/HD/3G-SDI Distribution Amplifier is a 1 in, 2 out distribution and extender with Re-clocking and cable
equalizer and cable driver function.
It is a reliable video splitting device which split one channel SD/HD-SDI/3G-SDI video source to two
displays simultaneously and extend HD-SDI signal up to 180meter via Belden 1964a coax cable .
Features ..
SDI Standard: SD-SDI, HD-SDI,3G-SDI
Data Rates: 270Mbps/1.485/2.97 Gbps
Signal Type: SMPTE 292M, SMPTE 259M
SMPTE 424
Two separately buffered outputs
Cable equalization (Belden 1694A) retiming and signal
Re-clocking function capability –unlimited repeater connection
Dual color LED indication of input lock and rate
Pass all ancillary data
DC 5V,1A

2
Please read the Manual before attempting to use this product.
Specifications and appearance are subject to change without notice.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences f o the
environment and human health, which could otherwise be caused by inappropriate waste handling of this produc t
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of th is
product, please contact your local city office, your household waste disposal service or the shop where you purchase d
the product.
Caution ..
1. Handle this product with care
Avoid any shock or bumping of the product. Improper handling could damage the product. Do
not handle the unit with wet hands. Provide proper ventilation and air circulation and do not
use near water.
2. Requires a proper operating environment
This product is not waterproof and is designed for indoor use. The allowable temperature
range for operation of this product is between 0 C~40 C / 32°F~104°F.
3. Check the power source voltage
The power source voltage should be within the specified range. (Product must meet the
specifications)

3
4. Objects and liquid entry
Never push objects of any kind into this product as this may touch dangerous voltage points of
short out parts that could result in a fire or electric shock. Never spill any kind of liquid on the
product.
5. Cleaning
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
6. Servicing
Do not attempt to service this product by yourself as opening or removing covers may expose
you to dangerous voltage or other hazard s. Refer all service to qualified servicing personnel.
Package Contents ..
1. One (1) SD/HD-SDI/3G-SDI 1 to 2 Distribution Amplifier
2. One (1) User Manual
3. One (1) AC Adapter
1. 2. 3.
For any returns, please include all components listed above with original packaging in Resalable
Condition. Absolutely No Returns will be accepted if any component is missing/damaged.

4
Name
Color
Status
Description
ACT(SDI)
Green
ON
SDI signal is active status.
OFF
SDI signal is inactive status.
PWR
Green
ON
Power source has been connected.
OFF
Power source hasn’t been connected.
Application Diagram ..
* The distance depends on the quality of the SDI signal from the HD camera source and also the Coax
Cable & Conne
Parts & Functions ..

5
Hardware Installation ..
1. To open the box, then checking the quality, model no. and quantity of the equipments
and accessories according to the picking list, if there were any questions, just feel free
to contact us or the local distributors.
2. To check the power supply configuration, if it were DC input, just connects with the
correct voltage according to the power supply input requirements. To connect AC/DC
Adapter to the alternating current power supply socket.
3. Connect SDI source with SDI outputs like SDI camera to our device’s input port
4. Connect the display or other equipment with SDI inputs (e.g. monitors or video
processors) to our device’s output port.
5. Power on

6
Technical Specifications ..
Model
SD/HD-SDI distribution amplifier
SDI Standards
SD-SDI, HD-SDI,3G-SDI
Data Rates
270 / 1483 / 1485/2.97
Video Support
[HD] 720p50/59.94/60, 1080i50/59.94/60, 1080p24/30 [SD]
480I/P, 576I/P
SDI Signal Type
SMPTE-292M, SMPTE-259M,,SMPTE-424M
Output Impedance
75 oh m s
Cable Equalization
Cable driver
3G-SDI up to 60 Meters
HD-SDI up to 180 Meters
SD-SDI up to 350 Meters
RP-918 Pathological
Patterns
Imm un e
PCB Stack-up
4-layer bo ar d
[impedance control -- differential 100 oh ms;
single 50 oh ms]
Input
1x BNC [ SD I]
Output
2x BNC [ SD I]
BNC Connector
75 ohms inter-locked socket
Eye Pattern
Characteristics
Amplitude: Within 800mV ±3% (< 10% )
Rise overshoot: Less than 2% (< 10% )
Fall overshoot: Less than 2% (< 10% )
Long time jitter: 0.195 UI (<1.0 UI)
Timing jitter: 0.195 UI (<1.0 UI)
Alignment jitter: 0.127 UI (<0.2 U I)
Power Adapter
DC 12V ,1A
Power Consumption
2~4 Watts
Relative Humidity
20~95% RH (no condensation)
Dimension
119*73*36mm
*Specifications are subject to change without notice
Eye Diagram ..

7
HD-SDI Mode

IMPORTANT NOTE: Cable & Connector for SDI HD Camera
In order to achieve the Best Qualityand Long Range coax cable run upto
200m /600ft, you will need:
1. Good Quality Cable: We suggest using RG6 Belden 1694A Low Loss Serial Digital coax
cable because RG6 cables have better grounding than RG59 cables. RG6 is for Digital
Signal and RG59 is for Analog Signal.
2. Good Quality BNC Connectors: Contact Plating Gold plated pins provide
exceptional conductivity.
3. Good Quality Installation: Do not over cut the braid because it will affect the
grounding. The image will have lines and noise.
Bare Copper
Jacket Braid Shielding
Conductor
Dielectric Contact Plating
Gold Plated Pin
Limited Warranty ..
IMITED ONE (1) YEAR WARRANTY AND EXCLUSIONS
Manufacturer warrants to the original consumer purchaser and not for the benefit of anyone else that this
product at the time of its sale by Manufacturer is free of defects in materials and workmanship under
normal and proper use for one (1) year from the purchase date. Manufacturer's only obligation is to correct
uch defects by repair or replacement, at its option, if within such one (1) year period the product is
eturned prepaid, with proof of purchase date, and a description of the problem.This warrant excludes and
here is disclaimed liability for labor for removal of this product or reinstallation.This warranty is voided if
his product is installed improperly or in an improper environment, overloaded, misused, opened,
bused, or altered in any manner, or is not used under normal operating conditions or not in accordance
with any labels or instructions. There are no other implied warranties of any kind, including
merchantability and fitness or a particular purpose, but if any implied warranty is required by the
pplicable jurisdiction, the duration of any such implied warrant, including merchantability and fitness of or
particular purpose, is limited to one (1) year.
Manufacturer is not liable for incidental, indirect, special, or consequential damages, including without
imitation, damage to, or loss of use of, any equipment, loss sales or profits or delay or failure to
perform this warranty obligation. The remedies, provided therein are the exclusive remedies under this
warranty, whether based on contract, tort or otherwise.