Marantz 40n User manual

Network Integrated Amplifier
Owner’s Manual
1

Accessories 6
Inserting the batteries 7
Operating range of the remote control unit 7
Part names and functions 8
Front panel 8
Rear panel 11
Remote control unit 14
Connections
Connecting speakers 20
Connecting the speaker cables 20
Connecting the subwoofer 21
Connecting speakers 22
Connecting a playback device 23
Connecting a recording device 24
Connecting to a device with digital audio connectors 25
Connecting a USB flash drive to the USB port 27
Connecting to a home network (LAN) 28
Wired LAN 28
Wireless LAN 29
Connecting a pre-amplifier 30
Connecting devices with remote control connectors 31
Performing operations by RC on this unit without visual contact 31
Remotely connecting Marantz audio devices 31
Connecting the power cord 32
Contents Connections Playback Settings Tips Appendix
2
Front panel Rear panel
Remote control
unit
Index

Playback
Basic operation 34
Turning the power on 34
Switching the power to standby 34
Selecting the input source 35
Adjusting the volume 35
Turning off the sound temporarily (Muting) 35
Playing CDs 36
Listening to music on a Bluetooth device 37
Listening to music on a Bluetooth device 38
Pairing with other Bluetooth devices 39
Reconnecting to this unit from a Bluetooth device 39
Playing digital input 40
Getting the HEOS App 42
Setting up the HEOS App for the first time with a HEOS built-in
device 43
Adding the registration of HEOS built-in devices in the HEOS App 44
HEOS Account 45
Playing from streaming music services 46
Listening to the same music in multiple rooms 49
Listening to Internet Radio 53
Playing music stored on your mobile 53
Playing back files stored on a PC or NAS 54
Playing music from a USB flash drive 54
AirPlay function 56
Playing songs from your iPhone, iPod touch or iPad 57
Playing iTunes music with this unit 57
Play a song from your iPhone, iPod touch or iPad on multiple
synced devices (AirPlay 2) 58
Spotify Connect function 59
Playing Spotify music with this unit 59
Convenience functions 60
Adjusting the tone and balance 60
Playback in source direct mode 60
Switching the display’s brightness 61
Using the sleep timer 61
Recording 62
Using this unit as a power amplifier 62
Contents Connections Playback Settings Tips Appendix
3
Front panel Rear panel
Remote control
unit
Index

Settings
Menu map 63
Menu operation 65
Audio 66
Digital Filter 66
Lock Range 66
Volume Limit 67
Low Pass Filter 67
TV 68
TV Input 68
Auto-Play 68
HDMI Power Off Control 68
General 69
Lighting 69
Auto-Standby 69
Reset 70
Network 71
Network & USB-A 71
Wi-Fi 71
Bluetooth 71
Network Control 72
Sharing and connecting to the Wi-Fi setting of an iOS device 73
Connecting by using the WPS button on the router 74
Tips
Tips 76
Troubleshooting 78
Power does not turn on / Power is turned off 79
Operations cannot be performed through the remote control unit 81
Display on this unit shows nothing 81
No sound comes out 82
Sound is interrupted or noise occurs 83
Desired sound does not come out 85
AirPlay cannot be played back 86
USB flash drives cannot be played back 87
Bluetooth cannot be played back 88
The Internet radio cannot be played back 89
Music files on PC or NAS cannot be played back (Music server) 90
Various online services cannot be played 91
Cannot connect to a wireless LAN network 91
Audio from digital devices cannot be played back (HDMI ARC/
Coaxial/Optical) 93
The input source switches to “HDMI ARC”, “Optical” or “Coaxial” 93
The HDMI control function does not work 93
Update/upgrade error messages 94
Restoring the firmware to the factory defaults 95
Contents Connections Playback Settings Tips Appendix
4
Front panel Rear panel
Remote control
unit
Index

Appendix
Playing back a USB flash drives 96
D/A converter 97
Playing back a Bluetooth device 98
Playing back files stored on a PC and NAS 99
Playing back Internet Radio 100
Last function memory 100
About HDMI 101
Explanation of terms 102
Trademark information 106
Specifications 107
Index 112
Contents Connections Playback Settings Tips Appendix
5
Front panel Rear panel
Remote control
unit
Index

Thank you for purchasing this Marantz product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
Check that the following parts are supplied with the product.
External antennas for
Bluetooth/wireless
connectivity
R03/AAA batteries
Power cord
Quick Start Guide Safety Instructions Cautions on Using Batteries Notes on radio
Remote control unit
(RC005PM)
Contents Connections Playback Settings Tips Appendix
6
Front panel Rear panel
Remote control
unit
Index

Inserting the batteries
1Remove the rear lid in the direction of the arrow and
remove it.
2Insert two batteries correctly into the battery
compartment as indicated.
Batteries
3Put the rear lid back on.
NOTE
0To prevent damage or leakage of battery fluid:
0Do not use a new battery together with an old one.
0Do not use two different types of batteries.
0Remove the batteries from the remote control unit if it will not be in use for long
periods.
0If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Operating range of the remote control
unit
Point the remote control unit at the remote sensor when operating it.
Approx. 7 m
30° 30°
Contents Connections Playback Settings Tips Appendix
7
Front panel Rear panel
Remote control
unit
Index

Part names and functions
Front panel
ioQ
0
Q
1
Q
2
u
er t
qw wy
For details, see the next page.
Contents Connections Playback Settings Tips Appendix
8
Front panel Rear panel
Remote control
unit
Index

er t
qwww
y
APower on/standby button (X)
This turns the power on/off (standby). (v p. 34)
BLighting LED
This illuminates when the power is turned on. Brightness can be
changed and lighting turned off. (v p. 69)
CDisplay
This displays various pieces of information.
DRemote control sensor
This receives signals from the remote control unit. (v p. 7)
EProtection circuit indicator
This blinks when the protection circuit has operated. (v p. 105)
FHeadphones jack
Used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers and from the PRE OUT
connectors.
NOTE
0To prevent hearing loss, do not raise the volume level excessively when using
headphones.
Contents Connections Playback Settings Tips Appendix
9
Front panel Rear panel
Remote control
unit
Index

ioQ
0
Q
1
Q
2
u
GINPUT selector knob
This switches input sources. (v p. 35)
HSOURCE DIRECT switching knob
This turns source direct mode on/off. (v p. 60)
IBASS control knob
This setting adjusts the volume level for the bass. (v p. 60)
JTREBLE control knob
This setting adjusts the volume level for the treble. (v p. 60)
KBALANCE control knob
This adjusts the balance of the volume output from the left and right
speakers. (v p. 60)
LVOLUME knob
Adjusts the volume. (v p. 35)
09, 0 and a can be adjusted when 8 is off (Source direct mode is off).
(v p. 60)
Contents Connections Playback Settings Tips Appendix
10
Front panel Rear panel
Remote control
unit
Index

Rear panel
DIGITAL AUDIO IN
DIGITAL AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO OUT
AUDIO OUT
PRE OUT
PRE OUT
POWER AMP IN
POWER AMP IN
HDMI ARC
HDMI ARC
NETWORK
NETWORK
OPTICAL
OPTICAL
COAXIAL
COAXIAL
CD
CD
LINE
LINE
PHONO
PHONO
SIGNAL GND
SIGNAL GND
RECORDER
RECORDER
RECORDER
RECORDER
SUBWOOFER
SUBWOOFER
5V/1A
5V/1A
IN
IN
REMOTE CONTROL
REMOTE CONTROL
OUT
OUT
SPEAKERS
SPEAKERS
AC IN
AC IN
Bluetooth / Wi-Fi
Bluetooth / Wi-Fi
ANTENNA
ANTENNA
Bluetooth / Wi-Fi
Bluetooth / Wi-Fi
ANTENNA
ANTENNA
q qetrwy u
oiQ
0
Q
1
Q
2
Q
3
Q
4
For details, see the next page.
Contents Connections Playback Settings Tips Appendix
11
Front panel Rear panel
Remote control
unit
Index

DIGITALAUDIO IN
DIGITALAUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO OUT
AUDIO OUT
PRE OUT
PRE OUT
POWER AMP IN
POWER AMP IN
HDMI ARC
HDMI ARC
NETWORK
NETWORK
OPTICAL
OPTICAL
COAXIAL
COAXIAL
CD
CD
LINE
LINE
PHONO
PHONO
SIGNAL GND
SIGNAL GND
RECORDER
RECORDER
RECORDER
RECORDER
SUBWOOFER
SUBWOOFER
5V/1A
5V/1A
IN
IN
REMOTE CONTROL
REMOTE CONTROL
OUT
OUT
SPEAKERS
SPEAKERS
AC IN
AC IN
Bluetooth / Wi-Fi
Bluetooth / Wi-Fi
ANTENNA
ANTENNA
Bluetooth / Wi-Fi
Bluetooth / Wi-Fi
ANTENNA
ANTENNA
q qetrwy u
ABluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 29)
APlace the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
BTurn clockwise until the antennas is fully connected.
CRotate the antenna upwards for best reception.
DIGITALAUDIOIN
DIGITALAUDIOIN
AUDIOIN
AUDIOIN
AUDIOIN
AUDIOIN
AUDIOOUT
AUDIOOUT
PREOUT
PREOUT
POWERAMP IN
POWERAMP IN
NETWORK
NETWORK
OPTICAL
OPTICAL
COAXIAL
COAXIAL
CD
CD
LINE
LINE
PHONO
PHONO
SIGNALGND
SIGNALGND
RECORDER
RECORDER
RECORDER
RECORDER
SUBWOOFER
SUBWOOFER
5V/1A
5V/1A
IN
IN
REMOTECONTROL
REMOTECONTROL
OUT
OUT
SPEAKERS
SPEAKERS
ACIN
ACIN
Bluetooth/ Wi-Fi
Bluetooth/ Wi-Fi
ANTENNA
ANTENNA
Bluetooth/ Wi-Fi
Bluetooth/ Wi-Fi
ANTENNA
ANTENNA
HDMIARC
HDMIARC
qwe
BUSB port (T)
This is used to connect USB storages (such as USB flash drives).
(v p. 27)
CNETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 28)
DSIGNAL GND terminal
Used to connect a ground wire for the turntable. (v p. 23)
EHDMI connector (HDMI ARC)
Used to connect an ARC function-compatible TV. (v p. 25)
FDIGITAL AUDIO IN connectors
Used to connect devices equipped with digital audio output connectors.
(v p. 25)
GSpeaker terminals (SPEAKERS)
Used to connect speakers. (v p. 20)
Contents Connections Playback Settings Tips Appendix
12
Front panel Rear panel
Remote control
unit
Index

DIGITALAUDIO IN
DIGITALAUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO OUT
AUDIO OUT
PRE OUT
PRE OUT
POWER AMP IN
POWER AMP IN
HDMI ARC
HDMI ARC
NETWORK
NETWORK
OPTICAL
OPTICAL
COAXIAL
COAXIAL
CD
CD
LINE
LINE
PHONO
PHONO
SIGNAL GND
SIGNAL GND
RECORDER
RECORDER
RECORDER
RECORDER
SUBWOOFER
SUBWOOFER
5V/1A
5V/1A
IN
IN
REMOTE CONTROL
REMOTE CONTROL
OUT
OUT
SPEAKERS
SPEAKERS
AC IN
AC IN
Bluetooth / Wi-Fi
Bluetooth / Wi-Fi
ANTENNA
ANTENNA
Bluetooth / Wi-Fi
Bluetooth / Wi-Fi
ANTENNA
ANTENNA
oiQ
0
Q
1
Q
2
Q
3
Q
4
HAUDIO IN connectors
Used to connect devices equipped with analog audio output
connectors.
0“Connecting a playback device” (v p. 23)
0“Connecting a recording device” (v p. 24)
IAUDIO OUT connectors
Used to connect the input connector of a recorder. (v p. 24)
JPRE OUT connector
Used to connect a subwoofer with a built-in amplifier. (v p. 21)
KPower amplifier connectors (POWER AMP IN)
Used to connect a pre-amplifier when this unit is used as a power
amplifier. (v p. 30)
LREMOTE CONTROL connectors
Used to connect to a Marantz audio device that is compatible with the
remote control function. (v p. 31)
MAC inlet (AC IN)
Used to connect the power cord. (v p. 32)
NFirmware reset button
Used to reset the firmware to the default state. (v p. 95)
Contents Connections Playback Settings Tips Appendix
13
Front panel Rear panel
Remote control
unit
Index

Remote control unit
w
e
q
The remote control provided with this unit can control a Marantz CD
player.
0“CD player operations” (v p. 17)
oOperating this unit
To operate this unit, press REMOTE MODE AMP button to switch the
remote control operating mode to this unit.
ARemote control signal transmitter
This transmits signals from the remote control unit. (v p. 7)
BInput source select buttons
These select the input source. (v p. 35)
CSystem buttons
These perform playback related operations.
0Play/Pause button (p)
Press this button to pause during playback. If pressed while paused
or stopped, resumes playback from the last track played.
0Forward-skip button (j)
Press this button during playback to play the next track.
0Reverse-skip button (k)
Press this button during playback to restart the current track or play
the previous track.
0Stop button (i)
Press this button to stop during playback.
0Depending on the input source and online service, the operation cannot be
performed.
Contents Connections Playback Settings Tips Appendix
14
Front panel Rear panel
Remote control
unit
Index

i
y
u
Q0
o
Q1
r
t
DCONNECT button
Used for Wi-Fi setup. (v p. 74)
EInput source select button (INPUT)
This switches input sources. (v p. 35)
FENTER button
This determines the selection.
GCursor buttons
These select items.
HBACK button
Returns to the previous item.
IPower on/standby button (AMP X)
This turns the power on/off (standby). (v p. 34)
JRemote mode select button
(REMOTE MODE AMP)
Switches the remote control operating mode to this unit.
KVOLUME buttons (no)
These adjust the volume level. (v p. 35)
Contents Connections Playback Settings Tips Appendix
15
Front panel Rear panel
Remote control
unit
Index

Q5
Q4
Q6
Q3
Q2
LOPTION button
This displays the option menu on the display.
0An option menu is not displayed for some input sources.
MMute button (:)
This mutes the output audio. (v p. 35)
NSETUP button
The setting menu is displayed on the display. (v p. 65)
OSLEEP button
This sets the sleep timer. (v p. 61)
PDIMMER button
Adjust the display brightness of this unit. (v p. 61)
Contents Connections Playback Settings Tips Appendix
16
Front panel Rear panel
Remote control
unit
Index

u
i
r
t
y
o
Q0
Q1
w
q
e
oCD player operations
A Marantz CD player can be operated.
To operate CD player, press REMOTE MODE CD button to switch the
remote control to the CD player operation mode.
APower on/standby button (CD X)
BRemote mode select button
(REMOTE MODE CD)
CSystem buttons
DInput source select button (INPUT)
EInformation button (INFO)
FPROGRAM button
GENTER button
HCursor buttons
INumber buttons (0 – 9)
JRANDOM button (s)
KREPEAT button (r)
Contents Connections Playback Settings Tips Appendix
17
Front panel Rear panel
Remote control
unit
Index

Q3
Q4
Q5
Q2
LOPTION (MODE) button
MSETUP button
NCLEAR button
ODIMMER button
0The remote control may not operate some products.
Contents Connections Playback Settings Tips Appendix
18
Front panel Rear panel
Remote control
unit
Index

oContents
Connecting speakers 20
Connecting a playback device 23
Connecting a recording device 24
Connecting to a device with digital audio connectors 25
Connecting a USB flash drive to the USB port 27
Connecting to a home network (LAN) 28
Connecting a pre-amplifier 30
Connecting devices with remote control connectors 31
Connecting the power cord 32
NOTE
0Do not plug in the power cord until all connections have been completed.
0Do not bundle power cords with connection cables. Doing so can result in
humming or noise.
oCables used for connections
Provide necessary cables according to the devices you want to
connect.
Speaker cable
Subwoofer cable
HDMI cable
Optical cable
Coaxial digital cable
Audio cable
R
L
R
L
LAN cable
Remote connector cable
Contents Connections Playback Settings Tips Appendix
19
Front panel Rear panel
Remote control
unit
Index

Connecting speakers
NOTE
0Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn off the subwoofer.
0Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and - sides touch each other. “Protection circuit” (v p. 105)
0Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock.
0Use speakers with an impedance of 4 – 16 Ω/ohms.
Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and - (white)
polarities on the speakers being connected to this unit, and be sure to
connect the channels and polarities correctly.
1
Peel off about 10 mm of sheathing from the tip of the speaker
cable, then either twist the core wire tightly or terminate it.
2
Turn the speaker terminal counterclockwise to loosen it.
3Insert the speaker cable’s core wire to the hilt into the
speaker terminal.
Contents Connections Playback Settings Tips Appendix
20
Front panel Rear panel
Remote control
unit
Index