Bernina 720 User manual

BERNINA 720
User Manual

Welcome
3
Dear BERNINA customer,
Congratulations! You have decided on BERNINA and therefore on a product which will delight you for years.
For more than 100 years our family company has attached greatest importance to satisfied customers. As for
me, it is a matter of personal concern to offer you Swiss development and precision at the height of
perfection, future-orientated sewing technology and a comprehensive customer service.
The BERNINA 7-series consists of various ultramodern machines, whose development not only focused the
highest demands on technique and the ease of use but also considered the design of the product. After all
we sell our products to creative people like you, who do not only appreciate high quality but also form and
design.
Enjoy the creative sewing, embroidering and quilting on your new BERNINA 720 and keep informed about
the various accessories at www.bernina.com. On our homepage you will also find a lot of inspiring sewing
instructions, to be downloaded for free.
Our highly trained BERNINA dealers will provide you with more information on service and maintenance
offers.
I wish you lots of pleasure and many creative hours with your new BERNINA.
H.P. Ueltschi
Owner
BERNINA International AG
CH-8266 Steckborn

Table of Contents
4
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS ................. 9
Important information ........................................ 12
1 My BERNINA ........................................................ 14
1.1 Introduction ........................................................... 14
1.2 BERNINA Quality control ........................................ 14
1.3 Welcome to the world of BERNINA ........................ 14
1.4 Overview Machine ................................................. 16
Overview front controls .............................................. 16
Overview front ............................................................ 17
Overview sideways ...................................................... 18
Overview - Back Panel ................................................. 19
1.5 Supplied accessories ............................................... 20
Overview accessories machine .................................... 20
Overview presser feet ................................................. 22
Accessory box ............................................................. 23
1.6 Overview User Interface ......................................... 24
Overview functions/visual information ......................... 24
Overview System settings ............................................ 24
Overview selection menu sewing ................................ 25
Software operation ..................................................... 25
1.7 Needle, Thread, Fabric ............................................ 27
Overview Needles ....................................................... 27
Example for needle description ................................... 29
Thread selection ......................................................... 29
Needle/thread combination ......................................... 30
2 Sewing preparation ............................................ 31
2.1 Before using the machine for the first time ............. 31
2.2 Accessory box ........................................................ 31
Accessory box free standing ........................................ 31
Storing accessories ...................................................... 31
2.3 Connection and Switching on ................................ 32
Connecting the foot control ....................................... 32
Connecting the machine ............................................. 32
Attaching the knee lifter of the Free Hand System ...... 33
Fixing the touchscreen pen ......................................... 33
Switching the machine on .......................................... 34
2.4 Foot control ........................................................... 34
Regulating the speed via the foot control .................... 34
Raising/Lowering the needle ....................................... 34
2.5 Spool pin ............................................................... 35
Swiveling spool pin ...................................................... 35
Horizontal spool pin ..................................................... 35
2.6 Feed dog ................................................................ 36
Adjusting the feed dog ................................................ 36
2.7 Slide-on table .......................................................... 36
Using the slide-on table ................................................ 36
2.8 Presser foot ............................................................. 37
Adjusting the presser foot position via the knee lifter
of the Free Hand System .............................................. 37
Adjusting the presser foot position via the button
«Presser foot up/down» ............................................... 37
Changing the presser foot ............................................ 37
Having the presser foot displayed in the User Interface . 38
Adjusting the presser foot pressure .............................. 38
2.9 Instruction for adjusting the feed dog ..................... 39
2.10 Needle and stitch plate ........................................... 39
Changing the needle .................................................... 39
Selecting the needle in the User Interface ..................... 39
Selecting the needle type and the needle size ............... 40
Adjusting the needle position up/down ........................ 40
Adjusting the needle position left/right ......................... 40
Needle stop up/down (permanent) ............................... 41
Changing the stitch plate ............................................. 41
Selecting the stitch plate in the User Interface .............. 42
2.11 Threading ............................................................... 42
Threading the upper thread ......................................... 42
Threading the double needle ........................................ 45
Threading the triple needle .......................................... 46
Winding the bobbin thread .......................................... 46
Threading the bobbin thread ........................................ 47
Indicating fill level of bobbin thread ............................. 49
3 Setup Program ..................................................... 50
3.1 Sewing settings ....................................................... 50
Adjusting the upper thread tension .............................. 50
Adjusting the maximum sewing speed ......................... 50
Programming the securing stitches ............................... 50
Adjusting the hovering height of the presser foot ......... 50
Programming the button «Pattern end» ....................... 51
Programming the button «Thread cutter» .................... 52
Adjusting the presser foot position with needle stop
down ........................................................................... 52
Programming the button «Quick reverse» .................... 53
3.2 Embroidery settings ................................................ 53
Adjusting the upper thread tension .............................. 53

Table of Contents
5
Adjusting the maximum embroidering speed .............. 53
Centering or opening embroidery motifs in the original
position ...................................................................... 54
Calibrating the hoop ................................................... 54
Entering the fabric thickness ....................................... 55
Activating/Deactivating the function thread away ....... 55
Programming the securing stitches ............................. 56
Adjusting the thread cut ............................................. 56
Changing the measuring unit ..................................... 57
3.3 Selecting personal settings ..................................... 57
3.4 Monitoring functions ............................................. 58
Activating the upper thread indicator .......................... 58
Activating the bobbin thread indicator ........................ 58
3.5 Activating the audio signals .................................... 58
3.6 Machine settings .................................................... 59
Selecting a language ................................................... 59
Adjusting the brightness of the display ....................... 59
Adjusting the sewing light .......................................... 60
Calibrating the display ................................................ 60
Back to default setting ................................................ 60
Deleting user data ...................................................... 61
Deleting motifs on the BERNINA USB Stick .................. 61
Calibrating the Buttonhole Foot #3A .......................... 62
Packing the embroidery module .................................. 62
Reviewing the total number of stitches ....................... 62
Registering details of the dealer .................................. 63
Saving Service data ..................................................... 63
4 System settings ................................................... 65
4.1 Calling up the Tutorial ............................................ 65
4.2 Calling up the Creative Consultant ......................... 65
4.3 Calling up the Help ................................................ 65
4.4 Using eco mode ..................................................... 65
4.5 Cancelling any alterations with «clr» ...................... 65
5 Creative sewing ................................................... 66
5.1 Overview selection menu sewing ............................ 66
Selecting a stitch pattern ............................................ 66
5.2 Regulating the speed ............................................. 66
5.3 Adjusting the upper thread tension ........................ 67
5.4 Editing stitch patterns ............................................ 68
Changing the stitch width .......................................... 68
Changing the stitch length ......................................... 68
Correcting the balance ............................................... 68
Programming pattern repeat ....................................... 69
Mirror image of stitch patterns ................................... 69
Editing stitch pattern length ........................................ 70
Quick reverse ............................................................... 70
Permanent Quick reverse .............................................. 70
Backstepping ............................................................... 70
5.5 Combining stitch patterns ....................................... 71
Overview Combi mode ................................................. 71
Creating Stitch pattern combinations ........................... 71
Saving a stitch pattern combination ............................. 72
Loading a stitch pattern combination ........................... 72
Overwriting a stitch pattern combination ...................... 72
Deleting a stitch pattern combination ........................... 72
Editing a single stitch pattern ....................................... 73
Deleting a single stitch pattern ..................................... 73
Adding a single stitch pattern ....................................... 74
Mirroring a stitch pattern combination ......................... 74
Stitch pattern combination Subdivider 1 ....................... 74
Stitch pattern combination Subdivider 2 ....................... 75
Securing a stitch pattern combination .......................... 75
Programming pattern repeat ........................................ 75
5.6 Administering stitch patterns .................................. 76
Saving settings of stitch patterns .................................. 76
Saving stitch patterns in personal memory .................... 76
Overwriting stitch patterns from the personal memory . 76
Loading stitch patterns from the personal memory ....... 76
Deleting stitch patterns from the personal memory ...... 77
Saving stitch patterns on the BERNINA USB stick .......... 77
Uploading a stitch pattern from the BERNINA USB stick
..................................................................................... 77
Deleting stitch patterns from the BERNINA USB stick .... 78
5.7 Securing ................................................................. 78
Securing with the button «Pattern end» ....................... 78
Securing via the icon «Securing» .................................. 78
5.8 Height Compensation of uneven layers ................... 78
5.9 Sewing Corners ...................................................... 79
6 Practical stitches ................................................... 80
6.1 Overview Practical Stitches ...................................... 80
6.2 Sewing straight stitch .............................................. 82
6.3 Securing with the automatic Securing Program ....... 83
6.4 Sewing in the zipper ............................................... 83
6.5 Sewing both sides of the zipper from bottom to top
................................................................................ 84
6.6 Sewing Triple Straight stitch .................................... 85
6.7 Sewing Triple zig zag .............................................. 86
6.8 Manual darning ...................................................... 86
6.9 Automatic darning .................................................. 88
6.10 Reinforced darning, automatic ................................ 89

Table of Contents
6
6.11 Finishing edges ...................................................... 89
6.12 Sewing Double overlock ......................................... 90
6.13 Narrow edgestitching ............................................. 90
6.14 Wide edgestitching ................................................ 91
6.15 Edgestitching using the seam guide ....................... 91
6.16 Sewing hem edges ................................................. 92
6.17 Sewing blind hems ................................................. 92
6.18 Sewing visible hems ............................................... 93
6.19 Sewing flat joining seams ....................................... 94
6.20 Sewing basting stitches .......................................... 94
7 Decorative stitches .............................................. 95
7.1 Overview Decorative Stitches .................................. 95
7.2 Bobbin-Play ............................................................ 96
7.3 Sewing cross stitches .............................................. 97
7.4 Pintucks ................................................................. 97
Pintucks ...................................................................... 97
Overview Pintuck Feet ................................................. 98
Working with cord ...................................................... 99
Sewing Pintucks .......................................................... 100
8 Alphabets ............................................................. 101
8.1 Overview Alphabet ................................................. 101
8.2 Creating lettering ................................................... 101
9 Buttonholes ......................................................... 103
9.1 Overview Buttonholes ............................................ 103
9.2 Making use of the height compensation tool ......... 104
9.3 Using the compensation plate ................................ 104
9.4 Marking buttonholes .............................................. 105
9.5 Cord ...................................................................... 106
Using cord with the Buttonhole Foot with Slide#3A ... 106
Using cord with the Buttonhole Foot#3 ..................... 107
9.6 Sewing a test sample ............................................. 108
9.7 Determining the buttonhole slit width .................... 108
9.8 Determining the buttonhole length with the
Buttonhole Foot with Slide#3A .............................. 109
9.9 Determining the buttonhole length with Buttonhole
Foot#3 .................................................................. 109
9.10 Sewing a buttonhole automatically ........................ 110
9.11 Programming the Heirloom buttonhole .................. 111
9.12 Sewing the manual 7-step buttonhole .................... 111
9.13 Sewing the manual 5-step buttonhole .................... 112
9.14 Cutting the buttonhole open with the seam ripper . 113
9.15 Cutting open buttonholes with the buttonhole
cutter (optional accessory) ....................................... 113
9.16 Sewing on buttons .................................................. 113
9.17 Sewing eyelets ........................................................ 114
10 Quilting ................................................................. 115
10.1 Overview Quilt Stitches ........................................... 115
10.2 Quilting, Securing Program ..................................... 116
10.3 Sewing handlook quilt stitches ................................ 116
10.4 Guiding the quilt work freely .................................. 117
11 BERNINA Stitch Regulator (BSR) ......................... 119
11.1 BSR mode 1 ............................................................ 119
11.2 BSR mode 2 ............................................................ 119
11.3 BSR function with Straight stitch No. 1 .................... 119
11.4 BSR function with Zigzag No.2 ............................... 119
11.5 Sewing preparations for quilting ............................. 119
Attach the BSR presser foot ..........................................119
Changing the presser foot sole .....................................120
11.6 Using the BSR mode ............................................... 120
11.7 Securing ................................................................. 121
Securing in BSR1 Mode with the button «Start/Stop» ...121
Securing in BSR2 Mode ................................................122
12 My BERNINA Embroidery .................................... 123
12.1 Overview Embroidery module ................................. 123
12.2 Supplied accessories Embroidery module ................. 123
Overview accessory Embroidery module .......................123
12.3 Overview User Interface .......................................... 125
Overview functions/visual information .......................... 125
Overview System settings ............................................. 125
Overview Selection menu embroidery ........................... 126
12.4 Important Embroidery information .......................... 126
Upper thread ...............................................................126
Bobbin thread ..............................................................127
Choosing the embroidery motif .................................... 127
Selecting the embroidery file format ............................. 127
Embroidery test ............................................................127
The size of the embroidery motif ..................................127
Embroidering motifs by third-party providers ................127
Underlay stitches ..........................................................128
Satin or Leaf stitch .......................................................128
Step stitch ....................................................................128

Table of Contents
7
Connecting stitches .................................................... 129
13 Embroidering preparation .................................. 130
13.1 Attaching the Module ............................................ 130
13.2 Preparing the machine ........................................... 131
Lowering the feed dog ............................................... 131
Selecting an embroidery motif .................................... 131
13.3 Embroidery foot ..................................................... 131
Attaching the embroidery foot .................................... 131
Selecting the presser foot in the User Interface ........... 132
13.4 Needle and stitch plate ........................................... 132
Inserting the embroidery needle .................................. 132
Selecting the embroidery needle in the User Interface . 133
Selecting the needle type and the needle size ............. 133
Attaching the stitch plate ............................................ 134
Selecting the stitch plate in the User Interface ............. 135
Thread-up command .................................................. 135
13.5 Embroidery hoop ................................................... 135
Overview Embroidery hoop selection .......................... 135
Selecting the embroidery hoop ................................... 136
Tear-away stabilizers ................................................... 136
Cut-away stabilizers .................................................... 136
Using adhesive spray ................................................... 136
Using spray starch ....................................................... 136
Using iron-on interfacing ............................................ 137
Using paper-backed adhesive stabilizer ....................... 137
Using water-soluble stabilizer ...................................... 137
Preparing the embroidery hoop .................................. 137
Attaching the hoop .................................................... 138
Overview Embroidery functions ................................... 139
Center the needle to the embroidery hoop ................. 139
Moving the hoop to the back ..................................... 139
Moving the module for the sewing mode ................... 140
Grid on/off ................................................................. 140
Locating the center of the embroidery motif ............... 140
Virtual positioning of the embroidery hoop ................. 140
14 Setup Program ..................................................... 142
14.1 Adjusting the embroidery settings in the Setup
Program ................................................................. 142
15 Creative embroidering ........................................ 143
15.1 Overview embroidering .......................................... 143
15.2 Selecting and changing the embroidery motif ........ 143
15.3 Checking the embroidery time and the embroidery
motif size ............................................................... 143
15.4 Regulating the speed ............................................. 144
15.5 Editing the embroidery motif .................................. 144
Overview Editing embroidery motif ...............................144
Scaling up the embroidery motif view ..........................144
Downsizing the embroidery motif view ........................144
Moving the embroidery motif view ............................... 145
Moving the embroidery motif in enlarged view .............145
Moving the embroidery motif ....................................... 145
Rotating motif .............................................................. 146
Altering the embroidery motif size proportionally ......... 146
Altering the embroidery motif size disproportionally .....147
Mirroring embroidery motifs ........................................148
Changing the stitch type ..............................................148
Altering the stitch density ............................................. 148
Checking the size and the position of the embroidery
motif ............................................................................ 149
15.6 Combining embroidery motifs ................................. 150
Combining embroidery motifs ......................................150
Deleting a single embroidery motif ...............................150
Duplicating the embroidery motif .................................151
Duplicating a combination ...........................................151
15.7 Creating lettering .................................................... 152
Overview embroidery alphabets ...................................152
Creating words/sentences ............................................152
Editing words/sentences ...............................................153
15.8 Changing the colors of the embroidery motif .......... 154
Overview changing the color ........................................154
Changing the colors .....................................................154
Changing the thread brand ..........................................154
15.9 Embroidering the embroidery motif ........................ 155
Overview Embroidery menu .........................................155
Adding basting stitches ................................................155
Moving the hoop .........................................................155
Embroidery sequence control when thread breaks ........ 156
Cutting connecting stitches ..........................................156
Reducing color changes ...............................................156
Multi-colored embroidery motif on/off .........................156
Color indication ...........................................................157
15.10 Administering embroidery motifs ............................ 157
Administering embroidery motifs .................................157
Saving embroidery motifs in the personal memory ........157
Saving the embroidery motif on the BERNINA USB stick
.....................................................................................158
Overwriting the embroidery motif in the personal
memory .......................................................................158
Overwriting the embroidery motif on the BERNINA USB
stick .............................................................................158
Importing stitch patterns ..............................................158
Loading an embroidery motif from the personal
memory .......................................................................159
Loading an embroidery motif from the BERNINA USB
stick .............................................................................159

Table of Contents
8
Deleting an embroidery motif from the personal
memory ...................................................................... 160
Deleting an embroidery motif from the BERNINA USB
stick ............................................................................ 160
16 Embroidery .......................................................... 161
16.1 Embroidering via the button «Start/Stop» .............. 161
16.2 Increasing the embroidery speed ............................ 161
16.3 Adjusting the upper thread tension ........................ 161
16.4 Embroidering via the foot control ........................... 162
17 Care and maintenance ........................................ 163
17.1 Firmware ................................................................ 163
Checking the firmware version ................................... 163
Updating firmware ..................................................... 163
Recovering saved data ................................................ 164
17.2 Machine ................................................................. 164
Cleaning the display ................................................... 164
Cleaning the feed dog ................................................ 164
Cleaning the hook ...................................................... 165
Lubricating the hook ................................................... 166
Cleaning the thread catcher ........................................ 168
18 Errors and faults .................................................. 169
18.1 Error messages ....................................................... 169
18.2 Troubleshooting ..................................................... 173
19 Storage and disposal .......................................... 177
19.1 Storing the machine ............................................... 177
19.2 Dispose of the machine .......................................... 177
20 Technical data ...................................................... 178
21 Overview stitch patterns .................................... 179
21.1 Overview Stitch patterns ........................................ 179
Practical stitches ......................................................... 179
Buttonholes ................................................................ 179
Decorative stitches ...................................................... 179
Quilt stitches ............................................................... 180
21.2 Overview Embroidery motifs ................................... 181
Editing embroidery motifs ........................................... 181
Quilt motifs ................................................................ 181
Embellishment ............................................................ 182
Flowers ....................................................................... 183
Children ..................................................................... 184
Borders and lace ......................................................... 186
Seasons ...................................................................... 187
DesignWorks design ................................................... 188
Index ..................................................................... 189

Important safety instructions
9
IMPORTANT SAFETY INSTRUCTIONS
Please be aware of the following basic safety instructions when using your
machine. Before using this machine, read instruction manual carefully.
DANGER
To protect against electric shock, the following instructions must be observed.
• Never leave the machine unattended when it is connected to the power
supply.
• Immediately after use and before cleaning, switch off the machine and
disconnect the power cable from the outlet.
In order to protect against injury, the following instructions must be adhered to.
• Do not look directly into the LED lamp with optical instruments
(e.g.magnifying glass).
• If the LED lamp is damaged or defective, have the LED lamp checked or
repaired at your local authorized BERNINA dealer.
• Switch off the machine before working in the needle area.
• Before starting the machine, close all covers.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons, the following
instructions must be observed.
General facts
• This machine may only be used for the purpose described in this instruction
manual.
Working environment
• Do not use the machine outdoors.
• Only use the machine in dry rooms.
• Do not use the machine in a humid area.
• Do not use the machine in rooms where aerosol products (sprays) are being
used.
• Do not use the machine in rooms where oxygen is dispensed.
Technical condition
• Never use the machine when it is damp.
• Do not use the machine if it is not working properly.

Important safety instructions
10
• Do not use the machine if a cable or the plug is damaged.
• Do not use the machine if it has been dropped, damaged or has fallen into
water.
• If the machine is damaged or does not work properly, have the machine
checked or repaired by your local authorized BERNINA dealer.
• Keep all ventilation openings of the machine and the foot control free of
lint, dust and loose cloth.
• Do not use the machine if the ventilation openings are blocked.
Accessories and Supplies
• Only use the accessories recommended by the manufacturer.
• Always use the original BERNINA Stitch Plate.
An incorrect stitch plate can result in needle breakage.
• Use only straight needles of good quality.
Bent or damaged needles can cause needle breakage.
• This machine is double-insulated (except for USA, Canada and Japan).
Use only identical replacement parts. See instructions for servicing of double-
insulated products.
• To lubricate the machine, only use oil recommended by BERNINA.
Safety instructions
• While operating the machine, all protective inserts must be in place and all
covers must be closed.
Appropriate use
• The machine may be used, cleaned and maintained by children older than
eight or by people with reduced physical, sensory or mental capabilities or if
there is a lack of experience and knowledge as long as they have been given
instructions.
• Furthermore, these persons must be supervised while working with the
machine, and/or they must know the safe operation of the machine and be
aware of the resulting hazards.
• Children must not play with the machine.
• Special care should be taken when the machine is operated by or in the
presence of children.
• Only use the machine with the supplied power cable.
• The power cable for USA and Canada (power plug NEMA 1-15) may only be
used for a maximum supply voltage of 150volt-to-ground.
• Only use this machine with the supplied foot control of type LV-1.
• Do not insert any objects into the openings of the machine.

Important safety instructions
11
• Do not place any objects on the foot control.
• While sewing, guide the fabric gently.
Pulling and pushing the fabric can cause needle breakage.
• Keep fingers away from all moving parts.
• Special care is required in the needle area.
• For activities in the needle area - such as threading the needle, changing the
needle, threading the looper or changing the presser foot - switch off the
machine.
• To switch off, set the power switch to «0».
• When protective covers are removed, when the machine is oiled or when
other cleaning and maintenance operations mentioned in this instruction
manual are carried out, switch off the machine and disconnect the power
plug from the outlet.
• Pull the plug out of the outlet by pulling on the plug. Do not pull on the
cable.

Important information
12
Important information
Availability of the instruction manual
The instruction manual is supplied with the machine.
• Keep the instruction manual safe at a suitable place near the machine to have it at hand in case that you
need to look up something.
• If you pass the machine to a third party, always include the instruction manual.
• The latest version of the instruction manual can be downloaded at www.bernina.com
Proper use
Your BERNINA machine is conceived and designed for private household use. It is intended for sewing fabrics
and other materials as described in this instruction manual. Any other use is not considered proper. BERNINA
assumes no liability for consequences resulting from improper use.
Equipment and scope of delivery
Example images are used in these operating instructions for the purposes of illustration. The machines shown
in the images and the accessories shown therefore do not always match the actual items included with your
machine. The supplied accessory can vary depending on the country of delivery. You can acquire any
accessories mentioned or shown that are not included in the scope of delivery as optional accessories from a
specialist BERNINA dealer. Further accessories can be found at www.bernina.com.
For technical reasons and in order to improve the product, changes may be made to the equipment of the
machine and the scope of delivery at any time and without prior notice.
Maintenance of double-insulated products
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding
means is provided on a double-insulated product nor should a means for grounding be added to the
product. Servicing a double-insulated product requires extreme care and knowledge of the system and
should only be done by qualified service personnel. Only original spare parts should be used for service and
repairs. A double-insulated product is marked with the words: «Double-Insulation »or «double-insulated».
The symbol may also be marked on the product.
Environmental Protection
BERNINA is committed to the protection of the environment. We strive to minimize the environmental impact
of our products by continuously improving product design and our technology of manufacturing.
The machine is labeled with the symbol of the crossed-out wastebin. This means that the machine should
not be disposed of in household waste when it is no longer needed. Improper disposal can result in
dangerous substances getting into the groundwater and thus into our food chain, damaging our health.
The machine must be returned free of charge to a nearby collection point for waste electrical and electronic
equipment or to a collection point for the reuse of the machine. Information on the collection points can be
obtained from your local administration. When purchasing a new machine, the dealer is obliged to take back
the old machine free of charge and dispose of it properly.
If the machine contains personal data, you are responsible for deleting the data yourself before returning the
machine.

Important information
13
Explanation of symbols
DANGER Designates a high-risk hazard which can lead to serious injuries or potentially even death if not avoided.
WARNING Designates a medium-risk hazard which can lead to serious injuries if not avoided.
CAUTION Designates a low-risk hazard which can lead to minor or moderate injuries if not avoided.
NOTICE Designates a hazard which can lead to material damage if not avoided.
Tips from BERNINA sewing experts are found next to this symbol.

My BERNINA
14
1 My BERNINA
1.1 Introduction
With your BERNINA 720 you can sew, embroider and quilt. Delicate silk or satin fabrics as well as
heavyweight linen, fleece and denim can be sewn successfully with this machine. Numerous practical as well
as decorative stitches, buttonholes and embroidery motifs are at your disposal.
Additional to this instruction manual, three help programs are provided which will give you useful advice and
support at any time how to operate your BERNINA 720.
The Tutorial gives information and explanations, covering various aspects of sewing, embroidering and the
different stitches.
The Sewing Consultant informs you about decision support for sewing projects. After entering the fabric
and the desired sewing project, suggestions concerning the suitable needle and the appropriate presser foot
are displayed.
The Help Program provides information about individual stitch patterns, functions and operations in the
user interface.
Further information
In addition to this instruction manual for your BERNINA 720 the following information products are enclosed.
The current version of your manual as well as many other information about the machine and the accessories
can be found on our website https://www.bernina.com
1.2 BERNINA Quality control
All BERNINA machines are assembled with utmost care and are subjected to an extensive functionality test.
The integrated stitch counter therefore indicates that the machine has already sewn stitches, which were
performed exclusively for test purposes and quality control. The subsequent thorough cleaning does not
exclude the possibility that thread remnants may still be found in the machine.
1.3 Welcome to the world of BERNINA
Made to create, this is the slogan of BERNINA. Not only with our machines do we support you in the
implementation of your ideas. In addition to the offers listed below, we offer you lots of suggestions and
instructions for your future projects as well as the opportunity to exchange ideas with other sewing, quilting
and embroidery enthusiasts. I wish you lots of pleasure.
BERNINA YouTube Channel
On YouTube we offer a wide range of how-to videos and support concerning the most important functions
of our machines. You can also find detailed explanations many presser feet, meaning that your projects will
be a complete success.
https://www.youtube.com/BerninaInternational
Available in English and German.
inspiration – the sewing magazine in the online shop
Are you looking for ideas, sewing patterns and instructions for great sewing projects? In this case, the
BERNINA magazine «inspiration» is exactly what you need. Three times a year, inspiration offers fantastic
sewing and embroidery ideas. From seasonal fashion trends to trendy accessories and practical tips to
original decorations for your home or cute sewing ideas for children.
The magazine is available in English, German, Dutch, and French.

My BERNINA
15
In our online shop you can purchase "inspiration" as an e-magazine or as a print version, either as individual
issues or as a subscription. Furthermore, there are many individual downloadable cutting patterns to
discover! Please have a look at https://www.bernina.com/inspiration
BERNINA Blog
Subtle instructions, free sewing patterns and embroidery motifs as well as many new ideas: All this you can
find in the weekly blog of BERNINA. Our experts give useful tips and explain step by step how you can
achieve the desired result. In the community you can upload your own projects and exchange experiences
and ideas with other sewing and embroidering enthusiasts.
https://www.bernina.com/blog
Provided in English, German and Dutch.
BERNINA Social Media
Follow on social networks to learn more about events, thrilling projects as well as tips and tricks all about
sewing, quilting and embroidering. We keep updated and we are happy to show you one or two highlights
from the world of BERNINA.
https://www.bernina.com/social-media

My BERNINA
16
1.4 Overview Machine
Overview front controls
1
2
3
4
56
8
9
7
1 «Quick Reverse» 6 «Needle Up/Down»
2 «Thread Cutter» 7 «Upper Multi-function knob»
3 «Presser Foot Up/Down» 8 «Lower Multi-function knob»
4 «Start/Stop» 9 «Needle Left/Right»
5 «Pattern End»

My BERNINA
17
Overview front
2
1
3
4
6
5
7
8
9
11
10
12
1 Connection for embroidery module 7 Slide speed control
2 Bobbin cover 8 Thread take-up lever cover
3 Connection for accessory (optional accessory) 9 Thread take-up lever
4 Presser foot 10 Fixing screw
5 Needle threader 11 Connection for the slide-on table
6 Sewing light 12 Connection for Free Hand System

My BERNINA
18
Overview sideways
1
2
5
6
7
8
9
10
11
12
4
3
1 Connection for foot control 7 Power switch
2 PC-connection 8 Connection for power cable
3 Spool pin 9 Magnet holder for touchscreen pen
4 Winding unit with thread cutter 10 Air vents
5 Swiveling spool pin 11 USB port
6 Handwheel 12 Feed dog up/down

My BERNINA
19
Overview - Back Panel
1
2
3
5
7
6
4
8
9
12
13
14
10
11
1 Connection for Slide-on Table 8 Carry Handle
2 Connection for Darning Hoop 9 Bobbin Winder Pretension
3 BSR Connection 10 Thread Take-Up Lever
4 Connection for Accessory (optional accessory) 11 Thread Guide
5 Air Vents 12 Thread Cutter
6 Thread Guide 13 Feed Dog
7 Bobbin Winding Unit 14 Stitch Plate

My BERNINA
20
1.5 Supplied accessories
Overview accessories machine
Illustration Name Purpose
Dust cover To protect the machine from
dust and contamination.
BERNINA Accessory Box To store the supplied accessories
as well as the optional
accessories.
Free Hand System (FHS) To raise and lower the presser
foot.
Slide-on Table To increase the sewing surface.
CutWork/Straight stitch plate To sew straight stitches and for
CutWork.
Spool disc To support the regular
unwinding of the thread from
the spool.
Bobbin for B9 hook
Set of 5
To wind the bobbin thread.
Foam pad
2 pieces
The foam pad prevents the
thread from slipping, tangling or
breaking on the spool pin.