Better Bathrooms BeBa-27761 User manual

Product name:Wave Wall Mounted
Basin Mixer -Matte Black
Product Code：BeBa-27761
Single person assembly
V1 23.08.21

log in to your account and contact our customer services team via your
self-serve portal – betterbathrooms.com/CustomerAccount/Login
contact us via betterbathrooms.com/content/contact-us
Please read these instructions thoroughly and retain for future reference
Pressures should meet minimum stated on the website
Pressures must be balanced for optimum performance
Always check for pipes and cables before drilling
System must be flushed through prior to installation
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less.
From modern to traditional style ceramics, plus the gorgeous fixtures, fittings
and furniture to match. So, you can fall in love with your space every single
day.
As one of the UK's largest independent bathroom stores, we've received
countless awards; including the National Business Awards UK, the Digital
Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. How-
ever, should any problems occur, please:

Contents
Tools required
Parts / Diagrams
Dimension Drawing
Spanner ,Hammer ，Screw Driver，PTFE etc
Figure A

Installation should be as follows:
Please note: Before starting the installation of a new mixer, turn off water
supply
Please note: HOT supply to the left and COLD supply to right
1.Determine the fixing position and prepare recess for the faucet body. Make
the recess in the wall according to the dimension of the faucet body, the recess
should be approximately 190mm x 45mm The faucet body should be fitted
below the finished surface to allow the cover plate to fit correctly and flush
against the wall. Figure B
2. Position the faucet body in place and mark through the pre-drilled screw
holes on the body, then drill the marked points before inserting wall plugs into
the wall holes Figure C
3. Connect the pipe supplies a shown in Figure B, then check for leaks before
fitting plate, once checked turn off water supply
4. Apply silicone to the back of the cover plate as shown in Figure D and leave
to dry for 24 hours
5. Fit handle and spout using the screws provided, Figure E
6. Installation is complete, turn on water supply. Figure F

Cleaning
To maintain the surface finish of your product, wipe clean regularly, using a
clean damp cloth and dry cloth to polish. Do not use abrasive cleaning agents
or materials on the product surface as you may invalidate your guarantee.
Should any harsh chemicals come into contact with the surface of the product
during bathroom cleaning, rinse off immediately, wipe clean and dry.