BHG DELAHEY TM370322 User manual

11
BHG DELAHEY STORAGE BOX
ASSEMBLY INSTRUCTIONS
Style # TM370322
Wood is a living material that continues to respond to climate condition even after being made
into a piece of furniture.
Left untreated, it will weather to a silvery grey outdoors. During normal weathering, wood may
crack slightly due to changes in the moisture. This does not effect the structural integrity of your
furniture. We recommend periodically applying tung or oak/ teak oil to maintain its natural finish.
In order to maintain the product's durability, please read carefully.
To reinforce its weatherproof ability, this product has been treated with oil on its surface during
production. Before using, wipe with clean, dry cloth. If possible, apply the oil and rub the finish
lightly with a soft cloth to obtain a shinier Look.
Periodic applying oil ( commonly known as oak/teak oil; Easy to purchase from the stores/
supermarket) will ensure the timber is protected and its appearance maintained.
After season, apply oil and keep the furniture shaded or disassembled and repack the furniture
for storage.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
QUESTION ?
Identify all parts and hardware. If any pieces are missing call our toll free number
at 1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Friday) or e-mail
[e-mail] for replacement parts. For faster service, have the style number
handy when calling.
Care Instruction

2
TOOLS REQUIRED
1. Phillips screwdriver
- for tightening all bolts.
2. Wrench
- for tightening all bolts.
For proper assembly use these tools (not included)
F5/8" Screw............ 9 Pcs + 1
B
LIST OF WOODEN PARTS
DESCRIPTION
LIST OF HARDWARE PARTS
A1
A1
A2
B
C
D
E
Right side frame
Left side frame
Top frame
Front frame
Back frame
Base frame
C
NO.
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
1 Pc
Q'TY
IMPORTANT !
* ASSEMBLE YOUR UNIT IN AN AREA FREE FROM ANY OBJECTS THAT MIGHT SCRATCH
THE SURFACE OF YOUR UNIT.
* EXAMINE ALL PACKING MATERIAL BEFORE DISCARDING, SHORTAGES MAY OCCUR FROM
PARTS LEFT IN THE PACKING MATERIAL.
* PLEASE READ THE INSTRUCTIONS CAREFULLY, AND VERIFY ALL PARTS ARE INCLUDED.
* ALL BOLTS AND SCREWS NEED TO BE TIGHTENED FROM TIME TO TIME TO AVOID DAMAGE.
A2
D
E
1" Bolt ........ 8 Pcs + 1
16 mm Screw............ 8 Pcs + 1
Lid Support ............ 2 Pcs
Lid Nut ............ 2 Pcs
G
H
I
J

B
1
2
H
J
I
F
G
G
A2
A1
D
C
E
Attach the front and back frame (C & D) to
matching hole of the right and left side frame (A1 & A2).
Insert 1" bolts (G) to secure frame (A1&A2), position as shown .
STEP 1
Attach the base frame (E) to the assembly from step 1.
Attach the top frame (B) to the assembly from step 2,
secure with 5/8" screws (F) using screwdriver,
position as shown.
Then, attach the lid support (I) into top frame (B),
secure with 16 mm screw (H), as shown (figure 1).
Next, attach lid nut (J) and lid support bottom (I)
to the right and left side frame (A1&A2, using
wrench (figure 2).
I
THE DELAHEY STORAGE BOX IS NOW READY TO USE.
STEP 2
STEP 3
STEP 4
3