birzman BM20-FX-STAND User manual
BM20-FX-STAND
Parts included
Assembly
Attach the Legs to the designated slots,
being mindful of the direction of the Birzman logo.
& Insert the 5 mm hex bolt set from left
and right.
& Tighten the bolts to approx. 4 Nm
using the 5 mm hex wrenches.
Velcro strap x 1
End caps x 5 sets :
Ø5x100/12x100/15x100/15x110/20x110 mm
5 mm hex bolt set
Fork Mount
Storage Hook
Legs
BB Mount
Patent
Taiwan I695793
Select the appropriate end caps and attach
to the sides of the fork mount.
logo side
Hex wrenches x 3 :
5 mm x 2 & 2.5 mm x 1
Hex wrenches x 3 :
5 mm x 2 & 2.5 mm x 1
Select the appropriate end caps and attach
to the sides of the fork mount.
Repair Stand
If the Storage Hook has come loose, slightly
tighten the bolt of the QR lever with the
2.5 mm hex wrench.
If the Fork Mount has come loose, slightly
tighten the bolt of the QR lever with the
2.5 mm hex wrench.
≦23 mm / 0.9"
Make sure Feexstand is not in interference
with rotation of the rear wheel.
Insert axle through the Fork Mount
and tighten to secure the fork.
Place the bottom bracket shell onto the
BB Mount.
Loosen and release the QR lever, adjust
the Fork Mount to a suitable position and
tighten the lever to secure.
Attach the fork dropouts onto the Fork
Mount.
Insert Velcro strap through the slot on
the BB Mount and wrap it around the
frame for extra stability.
Max. distance from front axle to BB :
77.5 cm / 30.5".
2.5 mm
Please ensure the bike is properly secured onto Feexstand, and all QR levers are tightened before carrying out any repair and maintenance work.
Hold tightly on to the bike when removing it from Feexstand.
Note:
Importeur:
Sports Nut GmbH, Au-Ost 3/1, D-72072 Tübingen, Deutschland
BM20FXSTAND-PK2G
BIRZMAN CORP.
MADE IN TAIWAN
www.birzman.com
The rear wheel should be lifted to an appropriate
height above the legs of Feexstand.
Max. load : 25 kg / 55 lbs
Place the seat stay and chain stay onto the
Storage Hook simultaneously.
Ensure that there are no interference with
any sensors or cables.
Storage Stand
Overtightening may lead to immobility of the
lever and damages to the parts.
Overtightening may lead to immobility of the
lever and damages to the parts.
