Rehabmart WSP 420 User manual

ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 4
PART # QTY. DESCRIPTION
A024-4032 1 wall plate (silver)
024-4033
024-4034
024-4035
024-4036
024-4037
B520-9511 4 1/4-20 x 1/2" phillips screw
C520-9522 4 1/4-20 x 2 1/2" phillips screw
D560-9708 4 toggler
E540-9444 8 washer
F5S1-015-C04 4 #14 x 2.5" (6 mm x 65 mm)
washer head wood screw
WSP 420S WSP 425S WSP 430S WSP 435S WSP 440S WSP 445S
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
MODEL # PARTS LIST
Assembly Instructions - External Wall Plate
IMPORTANT! Read entire instruction sheet before you
start installation and assembly.
MAXIMUM LOAD
CAPACITY:
150 lb (68 kg)
*
Models: WSP 420, WSP 420S, WSP 420W,
WSP 425, WSP 425S, WSP 425W,
WSP 430, WSP 430S, WSP 430W,
WSP 435, WSP 435S, WSP 435W,
WSP 440, WSP 440S, WSP 440W,
WSP 445, WSP 445S, WSP 445W
WSP 420, WSP 420S, and WSP 420W for studs on 16" (406 mm)
centers.
WSP 425, WSP 425S, and WSP 425W for studs on 16" (406 mm)
centers, contains two electrical box knockouts.
WSP 430, WSP 430S, and WSP 430W for studs on 20" (508 mm)
or 16" (406 mm) centers.
WSP 435, WSP 435S, and WSP 435W for studs on 20" (508 mm)
or 16" (406 mm) centers, contains two electrical box knockouts.
WSP 440, WSP 440S, and WSP 440W for studs on 24" (610 mm),
20" (508 mm) or 16" (406 mm) centers.
WSP 445, WSP 445S, and WSP 445W for studs on 24" (610 mm),
20" (508 mm) or 16" (406 mm) centers, contains two electrical box
knockouts.
• Wall or mounting structure must be capable of sup-
porting a minimum static load of 600 lb (272 kg).
WARNING
A
BC
*Refers to maximum weight of TV or max.
combined weight of TV, VCR and VCR Bracket.
E
F
D
PART # QTY. DESCRIPTION
A024-1032 1 wall plate (black)
024-1033
024-1034
024-1035
024-1036
024-1037
B510-9108 4 1/4-20 x 1/2" phillips screw
C520-9521 4 1/4-20 x 2 1/2" phillips screw
D560-9708 4 toggler
E540-9440 8 washer
F5S1-015-C03 4 #14 x 2.5" (6 mm x 65 mm)
washer head wood screw
WSP 420 WSP 425 WSP 430 WSP 435 WSP 440 WSP 445
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
MODEL # PARTS LIST
PART # QTY. DESCRIPTION
A024-2032 1 wall plate (white)
024-2033
024-2034
024-2035
024-2036
024-2037
B520-9511 4 1/4-20 x 1/2" phillips screw
C520-9522 4 1/4-20 x 2 1/2" phillips screw
D560-9708 4 toggler
E540-9444 8 washer
F5S1-015-C04 4 #14 x 2.5" (6 mm x 65 mm)
washer head wood screw
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
MODEL # PARTS LIST
WSP 420W WSP 425W WSP 430W WSP 435W WSP 440W WSP 445W

ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
2 of 4
Use a stud
finder to locate stud
centers.
Usewallplate
(A) as a template to
mark slot centers on
stud centers.
A
Note: Models WSP 430, WSP 430S, WSP
430W, WSP 435, WSP 435S, and WSP
435W can be mounted on both 20" or 16"
centers. Models WSP 440, WSP 440S,
WSP 440W, WSP 445, WSP 445S, and WSP
445W can be mounted on 24", 20", or 16"
centers.

ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
3 of 4
D
Rotatetoggler
clockwise to
wedgeit
againstinside
walls of metal
stud.
Push into
hole.
Pivotendof
toggler.
Slide plastic
capforward
whilepulling
back firmly on
ring.
Breakoff
excess.
D
∅ 1/2"
(13mm)
FOR METAL STUD WALLS ONLY: Drill four
1/2"(13mm) dia. holes through drywall and
studs. Insert togglers (D) as shown below...
Steps 3 and 4 cover attachment to a metal stud wall. For attachment to a wood stud wall skip to step 5, page 4.
• Make sure that mounting screws are anchored into the
center of the studs. The use of an "edge to edge" stud
finderishighlyrecommended.
WARNING

ISSUED: 12-06-95 SHEET #: 024-9001-3 11-30-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
4 of 4
Attach wall plate (A) with 1/4-20 x 2.5" phillips
screws(C),andwashers(E).
Four 1/4-20 x 1/2" phillips screws (B), and four
washers(E)areprovidedtoattachwall mount bracket
(sold separately) to wall plate.
A
E
C
Step 5 covers attachment to a wood stud wall.
FOR WOOD STUD WALLS ONLY drillfour 5/32" (4 mm)
dia. holes 2 1/2" (65 mm) deep.Attach wall plate (A)
using four #14 x 2.5"(6 mm x 65 mm) wood screws (F).
Four 1/4-20 x 1/2" phillips screws (B), and four washers
(E)are provided to attach wall mount bracket (sold
separately)towall plate.
F
©2006PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
• Tighten wood screws so that wall plate is firmly
attached,but do notovertighten.Overtighteningcan
damagethe screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the studs. The use of an "edge to edge" stud
finderis highly recommended.
WARNING
A