
1.PLACE THE FRAME 2.INSTALL THE FRAME 3.MARK DOWN THE WALL
Drill with precision by first using the 5mm
drill, and then the 8mm drill. Drill as deep as
the screws
are in length.
Hammer the plugs
into the drill holes.
Secure 1 screw. Extra space?
Place washer (G) or spacer (H) in between.
Now secure the other 3 screws in the same
way.
Drill the wall mount
onto the wall. Use
the spirit level for accuracy.
Place the cover caps
vast op de
muurbeugel.
Lift the TV with 2 people and attach it to the
wall mount.
Place the securing bar (J) in the groove and
attach it with the tie wrap (J).
Done! Pat yourself on the back, turn on
the TV, and bask in the glory of your
accomplishment.
Draw an X on the wall where the middle of
the TV should align.
Place the mold
on the wall so you can
see the X you’ve just drawn using the
marker and draw the drill holes using
the spirit level (I).
Need help?
Call 010 798 89 99 or visit
Coolblue.nl/en/customer-service
Prior to drilling
Use the pipe locator to check
if there aren’t any pipes or
cables behind the wall.
Place your TV on a blanket and place the
TV frame
on your TV as pictured.
Look in bags A through F
for the screw
that fits your TV. You only need 1 set of
screws.
Suitable surface area:
Solid brick
Solid concrete
CBL1162
4.DRILL 5.INSTALL THE WALL MOUNT 6.SECURE THE WALL MOUNT
Coolblue isn’t liable for any damage, accidents,
or arguments with boy/girlfriends as a result of
incorrect installation. Not sure if you can do this
on your own? Ask a skilled installation expert
for advice.
CHECKLIST.
You’re 50% there.