
Product Name: Evacuation Sledge (EA786821)
Intended Purpose and Design: The product is an evacuation sledge
designed for the safe and secure transport of the non-ambulant person from a
building during an emergency. The sledge should be operated by two people
(unless risk assessed for one person), allowing the non-ambulant user, in a
laying down position, to be maneuvered away from danger.
The evacuation sledge consists of two layers of foam inside a flame-retardant
cover. The bottom layer of foam is firm, allowing the sledge to ride over
surfaces, such as carpets, concrete, wood or any bumps like stairs. The upper
layer of foam is softer for user comfort during transit. In order to hold the user
in place during transit, it also features extremely durable webbing, buckles and
a foot pocket. There are also pulling loops at each end and a tough slippery
coated bottom side. The loop at the head end is to hold the unit back when
descending stairways.
Operator Qualifications: The evacuation sledge should be used by two
operators (unless risk assessed for one person). It is intended to be used by
suitably trained and competent operators and only for the intended purpose,
as specified in this instruction guide. In addition to the information in this
guide, operators must adhere to local health and safety and manual handling
policies.
Instructions for Use (IFU):
Prior To Use: Upon receipt, all packaging should be removed and visual
checks should be carried out to ensure:
The contents are complete
The product has not been damaged in transit
All fittings operate correctly
Storage and Servicing: The evacuation sledge is designed to be stored in its
bag and on the wall for easy access in case of emergency. It should be
visually inspected regularly to check for material degradation, damage,
misuse or tampering. If following the visual inspection, it is not fit for purpose,
it should be disposed of safely.
During Use:
Pull the yellow zip head to unzip the storage bag to release the sledge
Unfold the evacuation sledge and lay fully extended on the floor,
cotton
and buckle side up, release the buckles and lay the straps and
buckles to the side
Lay user on the evacuation sledge
Ensure users feet are in the foot pocket
If required, wrap the user in a duvet or blanket
Tighten security belts over the user
The operators can then manoeuvre the user to safety using the loops
If moving downstairs, ensure the users head is at the top of the sledge
and feet first down the stairs and that operators remain in full control
Aftercare: This is a reusable product, therefore, the following
processes should be undertaken to allow its re-use.
Visual Inspection: After use it should be visually checked to see
whether it is in good condition and for signs of material
degradation or damage. If material degradation or damage is
noted, then it should not be re-used and should be disposed of
safely. If it is in good condition, then it should be cleaned as per
the instructions below. It should then be folded and returned to the
storage bag.
Cleaning: The cover and/or bag is machine washable at 60 C.
Always remove the foam inner before washing. It can also be
cleaned using a damp cloth or antibacterial wipes.
General Warnings Precautions and Limitations:
Only trained and competent operators should operate the product
Only use the evacuation sledge for its intended purpose
Do not exceed user maximum weight of 320 kg (SWL 150kg)
The user should not be left in the sledge unattended
The operators must always be in control when operating the product
The operators must not let go of the evacuation sledge during transit