blukii Hub User manual

Manual blukii Hub
17.01.2023
Made in Germany
Manual blukii Hub
Features
•Supply via 230V Euro power cable, therefore no maintenance costs for
battery change
•Network connection via LAN
•Sensor Monitoring: collect sensor data from blukii Sensor Beacons
•Event Monitoring: recording and forwarding of Smart Beacon events
•Asset Tracking: basis for tracking objects
•Admin Panel: Easy configuration via the Hub Admin Panel
•Updates: The Hub can always be kept up-to-date via its update function
•Service Button: Remote maintenance can be enabled via the service button
•Push interface: Data is forwarded to an adjustable target address via HTTP / HTTPS with optional authentication
mechanisms
Intended Use
The blukii hub is a Bluetooth receiver. It is used to monitor and track blukii beacons.
•This document is part of the product. It contains important information on commissioning and operation. Keep it safe.
•Any other use than described in these instructions is not permitted. The manufacturer assumes no liability for personal
injury or material damage resulting from improper use.
•The product may not be rebuilt or modified.
•Make sure that the power plugs are easily accessible.
•If the product is damaged, it may no longer be used.
•Only operate the device within the technical specifications.
•The product may only be operated in dry and dust-free locations.
•The device must not come into contact with liquids. Use a dry, lint-free cloth to clean the device. Never use liquid or
strong detergents.
•The product must not be exposed to strong mechanical loads.
•The Hub must be protected from strong heat.
•Do not operate the device in the vicinity of flammable gases and vapors.
•Do not remove any stickers or labels from the product. These contain important product and safety information.
Scope of delivery
- blukii Hub
- Power adapter
- Antenna
- Table stand
- Wall bracket + mounting accessories
Commissioning of the blukii Hub
Screw the antenna onto the antenna connector on the housing. Place the blukii hub with the mounting accessories for table or wall
in a suitable place. Connect the device to a router or switch with an Ethernet cable. A DHCP server in the network must provide the
blukii Hub with an IP address and a connection to the Internet must be possible. Ensure a power supply via the included power
supply unit. The device starts automatically when the power supply is plugged in. The blukii hub is ready for operation when the
operating LED lights up green continuously.

Manual blukii Hub
17.01.2023
Made in Germany
Configuration via the Hub Admin Panel
Download the blukii Hub Admin Panel from http://www.blukii.com/. It can be found under Resources - Software and Apps. Start the
setup to install the software. When starting the Admin Panel for the first time, you will be asked for a user and a client ID. This
information can be found in the packaging of the blukii hub. The admin panel is now ready to configure your blukii hub.
A detailed configuration description can be found here: https://blukii.github.io/Developers/blukiiHub/
Troubleshooting
Problem
Root cause
Solution
Hub does not send any data
Push server URL is not entered or is
incorrect
The push server URL must be entered
correctly via the Hub Admin Panel
No blukii within reach
blukii must be brought within range
(<10m)
blukii does not send
Check with Configurator App whether
blukii is sending
Maintenance
Never clean the device with liquid cleaning agents. Use a dry, lint-free cloth. We recommend disconnecting the device from the
power supply during cleaning. When the cleaning process is complete, you can reconnect the device. The blukii Hub will start
automatically.
Technical specifications
Mechanische Spezifikationen
Protection class
IP20
Dimensions
210x142x38,2mm (without antenna)
Weight
360 g
Radio
Standard
Bluetooth 4.2 (Bluetooth Low Energy)
Controller
ESP 32 / Odroid C2
Range
Up to 100 m
Frequency range
2.402 to 2.480GHz
Antenna
Omnidirectional antenna
Beacon protocols
iBeacon, Eddystone(TLM, UID, URL), blukii Sensor Beacon
Protocol
Power supply
External power supply
Output: 15W (DC 5V/3A)
Mains voltage
230V (AC)/50Hz
Max. power consumption
Max 15W

Manual blukii Hub
17.01.2023
Made in Germany
Environmental requirements
Operating temperature
5°C to 35°C
Certifications
CE (2014/53/EU, 2011/65/EU)
Disposal
According to European guidelines and the German Electrical and Electronic Equipment Act (ElektroG), Hubs must not be
disposed of with household waste.
After use, dispose of Hubs at a responsible collection point for old electrical and electronic devices
CE Declaration
hard&softWERK GmbH declares herewith that the device is compliant with the basic requirements and the relevant rules in
directives 2014/53/EU und 2011/65/EU.
Service
More information about your product:
Contact: https://www.blukii.com/en/contact
Further documents: https://www.blukii.com/en/resources
Phone: [phone]
Mail: [e-mail]
hard&softWERK GmbH
Bahnhofstraße 10
D-78112 St. Georgen im Schwarzwald