BluMill V07326 User manual

MANUAL
GEBRUIKSAANWIJZING
MODE D’EMPLOI
ANLEITUNG
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 12020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 1 03-12-2020 16:0003-12-2020 16:00

2
EN - page 4
We are delighted that you have chosen the BluMill Power Air Cooler. The device
utilises the evaporation of water to produce a natural cooling effect – using no
chemicals at all. The touch control panel and the remote control which is also sup-
plied also allow easy and convenient control of the device.
We hope you have a lot of fun with your BluMill Power Air Cooler.
Information About the Operating Instructions
Before using the device for the first time, please read through these operating
instructions carefully and keep them for future reference and other users. They
form an integral part of the device. The manufacturer and importer do not accept
any liability if the information in these operating instructions is not complied with.
NL - pagina 17
wij danken je dat je hebt gekozen voor de aankoop van de BluMill Power Air Cooler.
Het apparaat benut de verdamping van water om een natuurlijk koeleffect
te creëren – zonder ook maar enige chemie. Het touch bedieningsveld en
de meegeleverde afstandsbediening maken bovendien een eenvoudige en
gemakkelijke aansturing mogelijk.
Wij wensen je veel plezier met je BluMill Power Air Cooler.
Informatie over de gebruikershandleiding
Lees vóór het eerste gebruik van het apparaat deze gebruikershandleiding
zorgvuldig door, en bewaar deze voor latere vragen en andere gebruikers. Deze
is een bestanddeel van het apparaat. Fabrikant en importeur aanvaarden geen
aansprakelij kheid wanneer de informatie in deze gebruikershandleiding niet in
acht wordt genomen.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 22020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 2 03-12-2020 16:0003-12-2020 16:00

3
FR - page 30
Nous vous félicitons d’avoir fait l’acquisition de notre BluMill Power Air Cooler.
L’appareil utilise l’évaporation de l’eau pour générer un effet rafraîchissant
naturel – sans aucun produit chimique. Le panneau de commande tactile et la
télécommande fournie permettent par ailleurs une gestion simple et confortable
de l’appareil.
Nous espérons que votre BluMill Power Air Cooler.vous donnera entière
satisfaction !
Informations sur le mode d’emploi
Veuillez lire attentivement le présent mode d’emploi avant la première utilisation
de l’appareil et le conserver précieusement pour toute question ultérieure ainsi
que pour les autres utilisateurs. Il fait partie intégrante de l’appareil. Le fabricant
et l’importateur déclinent toute responsabilité en cas de nonobservation des
instructions consignées dans le mode d’emploi.
DE - pagina 43
wirfreuen uns, dass du dich für das BluMill Power Air Cooler.
entschieden hast. Das Gerät nutzt die Verdunstung von Wasser, um einen
natürlichen Kühleffekt zu erzeugen – ganz ohne Chemie. Das TouchBedienfeld
und die mitgelieferte Fernbedienung ermöglichen zudem eine einfache und
bequeme Steuerung.
Wir wünschen dir viel Freude an deinem BluMill Power Air Cooler.
Informationen zur Gebrauchsanleitung
Lies vor dem ersten Gebrauch des Gerätes diese Gebrauchsanleitung sorgfältig
durch und bewahre sie für spätere Fragen und weitere Nutzer auf. Sie ist ein
Bestandteil des Gerätes. Hersteller und Importeur übernehmen keine Haftung,
wenn die Angaben in dieser Gebrauchsanleitung nicht beachtet werden.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 32020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 3 03-12-2020 16:0003-12-2020 16:00

4
SYMBOLS
SIGNAL WORDS
DANGER warns of serious injuries and danger to life
WARNING warns of possible serious injuries and danger to life
NOTICE warns of material damage
INTENDED USE
• This device is intended to be used for cooling, humidifying, refreshing and
ionising air indoors.
• The device is suitable for a surface area of no more than 25 m2. It is not a
substitute for an airconditioning system.
• The device is for personal use only and is not intended for commercial
applications.
• Use the device only for the specified purpose and only as described in the
operating instructions. Any other use is deemed to be improper.
• The warranty does not cover faults caused by incorrect handling, damage,
calcifi cation or attempted repairs. The same applies to normal wear and tear.
EN Please read this manual carefully and fully understand
before operating your appliance.
Danger symbols:
These symbols indicate possible dangers. Read the associated
safety notices carefully and follow them.
Supplementary information
Read operating instructions before use!
Symbol for direct current
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 42020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 4 03-12-2020 16:0003-12-2020 16:00

5
EN
SAFETY NOTICES
• This device may be used by children aged 8 and over and by people with
reduced physical, sensory or mental abilities or a lack of experience and / or
knowledge if they are supervised or have received instruction on how to use
the device safely and have understood the dangers resulting from failure to
comply with the relevant safety precautions.
• Children must not play with the device.
• Cleaning and user maintenance must not be carried out by children, unless
they are supervised.
• The device is not intended to be operated with an external timer or a separate
remote control system.
• The device must always be disconnected from the mains power when it is not
being supervised, when fi lling or emptying the water tank, and before cleaning
and changing the honeycomb fi lters.
• Do not make any modifications to the device. If the device, the mains adapter
or the mains cable are damaged, these parts must be replaced by the
manufacturer, customer service department or a similarly qualified person (e.
g. specialist workshop) in order to avoid any hazards.
DANGER – Danger of Electric Shock
• Use and store the device only in closed rooms.
• Do not use the device in rooms with high humidity.
• Never immerse the device and the connecting cable in water or other liquids
and ensure that these components cannot fall into water or become wet.
• If the device does fall into water or tip over once it has been fi lled with water,
switch off the power supply immediately. Do not attempt to pull it out of the
water while it is connected to the mains power! Have the device checked by
a specialist workshop before putting it back into operation.
• Do not touch the device and the connecting cable with wet hands when
these components are connected to the mains power.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 52020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 5 03-12-2020 16:0003-12-2020 16:00

6
EN WARNING – Danger of Fire
• Do not use the device in the vicinity of highly flammable materials (curtains,
textiles, etc.). Do not place any combustible materials (e. g. cardboard, paper,
plastic) on the device.
• Do not insert anything into the openings of the device and make sure that
they do not become clogged. The device must not be used with blocked
openings.
WARNING – Danger of Injury
• Keep children and animals away from plastic bags and fi lms. There is a
danger of suffocation.
• Do not leave small children and animals unsupervised with the device.
• Make sure that the connecting cable does not present a trip hazard. There is
a danger of falling over it.
• Make sure that the connecting cable is always kept out of the reach of small
children and animals. There is a danger of strangulation.
• Batteries can be deadly if swallowed. Batteries and the remote control
should be kept out of the reach of children and animals. If a battery is
swallowed, immediate medical attention must be sought. There is a danger
of burns from battery acid.
• If a battery leaks, avoid physical contact with the battery acid, and wear
protective gloves if necessary. If you touch battery acid, rinse the affected
areas with abundant clear water straight away and seek medical assistance
immediately. There is a danger of burns from battery acid.
NOTICE – Risk of Damage to Material and Property
• Lay the connecting cable in such a way that it is not squashed or bent
and does not come into contact with hot surfaces (also applies to the hot
surfaces of the device!).
• Switch off the device and pull the mains plug out of the plug socket if an
error occurs during operation, or before a thunderstorm.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 62020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 6 03-12-2020 16:0003-12-2020 16:00

7
EN
• Always switch the device off first before the mains plug is pulled out of the
plug socket. When you pull it out of the plug socket, always pull on the mains
plug and never the mains cable!
• Never pull or carry the device by the connecting cable.
• Do not tip the device or do something similar when there is water in the
water tank or the water tray.
• Protect the device from other heat sources, naked flames, subzero
temperatures, persistent moisture, wet conditions and impacts.
• Do not lay or place any heavy objects on the device.
• Use only original accessories from the manufacturer in order to guarantee
that there is no interference that may prevent the device from working and to
avoid possible damage.
NOTICE – Risk of Damage to Material and Property from
Batteries
• Use only the battery type specified in the technical data.
• Take batteries out of the remote control when they are dead or if you will
not be using the remote control for a prolonged period. This will prevent any
damage from leaks.
• Do not use the remote control if a battery has leaked. Remove dead batteries
from the battery compartment immediately.
• Always replace all batteries together. Do not use batteries of different types
or brands, or batteries with different capacities.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 72020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 7 03-12-2020 16:0003-12-2020 16:00

8
EN ITEMS SUPPLIED
• Cooling device 1 x
• Remote control 1 x
• Operating instructions 1 x
Check the items supplied for completeness and the components for transport damage. If
you find any damage, do not use the device but contact our customer service department.
Remove any possible films, stickers or transport protection from the device. Never
remove the rating plate and any possible warnings!
To use the remote control, you also require two 1.5 V batteries, AAA.
These are not supplied with the device.
AT A GLANCE
1. Cover of the filler opening
2. Control panel
3. Ventilation grille (adjustable)
4. Honeycomb filter
5. Honeycomb filter cover
6. Water level indicator
7. Drain plug
8. Castor lock (ON / OFF)
9. Castor
10. Water tank
11. Closure clasp for water tank
12. Air inlet
13. Housing
14. Air outlet
15. Lever for adjusting the ventilation grille
16. Recessed grip
17. Water tray
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 82020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 8 03-12-2020 16:0003-12-2020 16:00

9
EN
FUNCTIONAL OVERVIEW OF THE OPERATING ELEMENTS
The control lamps above the respective control fields indicate which functions have been
activated.
Control Panel
ION (18)
Activate / deactivate air cleaning. If this function is active, negatively charged ions which
bind dirt particles from the air are released.
TIMER (19)
Activate / set / deactivate timer
The device has a 24-hour timer. Youcan adjust this by repeatedly touching the TIMER
field (1to 24 – Off). When the timer is active, the setting appears alternately with the
speed level on the display(21).
INTERVAL (20)
Activate / deactivate interval mode. When this function is active, the device switches to an
interval mode. This is where the device operates on each speed level for 20 seconds and
then switches it automatically. The mode starts with the speed level which is set at the
time of activation and then circulates downwards through all levels.
Example: P1 > P3 > P2 > P1 > P3 > ...
SPEED (22)
Set the speed level. The fan of the device has 3 speed levels. You can set them by
repeatedly touching the SPEED fi eld. The setting appears on the display (P1 – P2 – P3).
18. ION field
19. TIMER field
20. INTERVAL field
21. Display
22. SPEED field
23. SWING field
24. COOL fi eld
25. POWER field
18 19 20 21 22 23 24 25
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 92020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 9 03-12-2020 16:0003-12-2020 16:00

10
EN SWING (23)
Activate / deactivate rotation
When this function is active, the vertical slats of the ventilation grille (3) automatically
swing from one side to the other.
COOL (24)
Activate / deactivate cooling and humidification
Please Note! This function can only be used with a filled water tank (10).
When this function is active, the water is pumped from the water tank into the water tray
(17) and from there it runs out over the honeycomb filters (4) back into the water tank. In
the process, the honeycomb filters are moistened and thus cool the air flow. In addition,
the air is humidifi ed.
Once the water in the water tank has been used up, you will hear beeps
and the COOL control lamp flashes. Thepump switches off automatically.
POWER (25)
Switch the device on / off
Remote Control
The buttons on the remote control
(Picture D) correspond to the functions of the
operating elements on the control panel(2). Only
the function of the COOL button is different.
Whereas the COOL fi eld (24) on the control panel
is intended both for activating and deactivating
the cooling and humidifi cation, this function can
only be activated using the COOL button on the
remote control. To deactivate the function and
accordingly switch to pure ventilation without
cooling, the WIND button on the remote control
must be pressed.
FILLING THE WATER TANK
Please Note!
• Only ever fill the water tank with cold tap water. Do not use any other liquids.
• Do not overfill the water tank (max. 10 l)! Electrical components could be damaged.
Increased risk of an electric shock.
D
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 102020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 10 03-12-2020 16:0003-12-2020 16:00

11
EN
1. Make sure that the device is not connected to the mains power.
2. Flip open the cover (1).
3. Carefully pour cold tap water into the water tray (17). When you do this, make sure
that the water tray does not overfl ow.
4. Flip the cover shut.
The water runs out of the water tray into the water tank (10) below the honeycomb filters
(4).
Alternative Filling
To fill the water tank, the device may
alternatively also be taken apart.
1. Release the two closure clasps
(11) of the water tank on the sides
of the device by levering them up
from below.
2. Reach into the recessed grips,
lift up the top part of the device
and detach it from the water
tank. Please note!Always place
the detached part down on a
moistureresistant surface.
3. Fill the water tank (Picture C).
4. Place the detached part of the device on the water tank. Make sure that the water
level indicator(6) is facing forwards.
5. Fix the water tank with the closure clasps on the housing (13).
For an even better cooling result, ice packs (not supplied with the device)
or ice cubes can optionally also be placed in the water tank.
INSERTING / CHANGING BATTERIES IN THE REMOTE
CONTROL
Before inserting the batteries, check whether the contacts in the remote control and on
the batteries are clean, and clean them if necessary.
1. Slide open the battery compartment cover in the direction of the arrow and take it off.
2. Take out used batteries if necessary and replace them with two new batteries (1.5 V;
AAA). Pay attention to the correct polarity (+ / –).
3. Place the battery compartment cover on the battery compartment and slide it counter
to the direction of the arrow to shut it.
Replace the batteries if the power of the remote control starts to wane.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 112020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 11 03-12-2020 16:0003-12-2020 16:00

12
EN POSITIONING AND CONNECTiNG THE DEVICE
Please Note!
• The device must have clearance of at least 1 m above it and to all sides and be placed
on a dry, even, solid and moistureresistant surface.
• Only connect the device to a plug socket that is properly installed and matches the
technical data of the device. The plug socket must also be readily accessible after
connection so that the connection to the mains can quickly be isolated.
1. Position the device at the location you want. When you do this, push the device
carefully so that the water in the water tank (10) does not spill out.
2. Secure the device to stop it rolling away by moving the castor lock (8) on the two front
castors (9) to the ON position.
3. Fully unwind the connecting cable and connect it to an easily accessible plug socket.
You will hear a beep. All elements on the control panel (2) will light up and go out with
the exception of the operating lamp POWER (25). The device is in standby mode.
USE
Please Note!
• Do not use the device without water. The pump could be damaged.
• Do not move the device during operation. Before the location of the device is changed,
switch off the device and disconnect it from the mains power.
• Do not operate the device unsupervised so that you can intervene immediately if there
are any faults.
1. Fill the water tank (10) (see the “Filling the Water Tank” chapter).
2. Position the device at the location you want and connect it (see the “Positioning and
Connecting the Device” chapter).
3. Touch the POWER fi eld (25) to switch on the device. The device starts to operate on
speed level 1. The ionisation ION (18) and the cooling and humidifying function COOL
(24) are activated.
4. Adjust the settings of the device to suit your individual needs (see the “Functional
Overview of the Operating Elements” chapter).
5. If the device is no longer going to be used, switch off the device via the POWER fi eld
and pull the mains plug out of the plug socket.
The air flow can be increased or decreased. To do this, move one of the
side levers(15) on the ventilation grille (3) manually up or down. This will
adjust the horizontal slats of the ventilation grille.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 122020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 12 03-12-2020 16:0003-12-2020 16:00

13
EN
CLEANING AND STORAGE
Please Note!
• No liquid must get into the device (with the exception of the water tray and the water
tank). Never immerse the device in water!
• Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the device.
These may damage the surfaces.
• Make sure that the device is not connected to the mains power.
• Wipe down the device with a soft, damp cloth. Remove more stubborn dirt with a little
mild detergent.
• Keep the device operational and clean the honeycomb filters (4) if necessary.
• If the device is not going to be used for a prolonged period and before storing it away,
it is essential to remove any remaining water from the water tank (10).
• Store the device in a clean, dry place so that it is protected and is out of the reach of
children and animals when it is not in use.
CLEANING AND STORAGE
Cleaning the Honeycomb Filters
• When rinsing the honeycomb fi lter, the water pressure must not be too great and the
jet of water must not be too strong. This could damage the honeycomb filter.
• Do not use any acidic or alkaline cleaning agents.
1. Undo the screws on the honeycomb fi lter covers (5) and take them off.
2. Grab a honeycomb fi lter cover on both sides at the top edge, press against the
housing(13) with your thumbs and thus release the honeycomb fi lter cover from the
housing. You need to apply a little force to do this.
3. Lift the honeycomb filter cover up out of the housing at an angle.
4. Tilt the honeycomb filter (4) towards you at the top and lift it up out of the device at an
angle (Picture E).
5. Repeat steps 2 to 4 for the remaining three honeycomb fi lters.
6. Rinse the honeycomb filters under running water.
7. Allow the honeycomb filters to dry completely.
8. Insert the honeycomb filters into the device.
9. Place the honeycomb filter covers in the
housing and press them against the housing
by their top edges. When you do this, make
sure that the locking lugs at the bottom
of the honeycomb filter cover fit in the
corresponding recesses in the housing.
10. Fix the honeycomb filter covers in place with
the screws.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 132020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 13 03-12-2020 16:0003-12-2020 16:00

14
EN Emptying the Water Tank
Please Note!
There are two possible ways to empty the water tank (10):
Drain Plug
Pull out the drain plug (7) on the bottom of the water tank and allow the water to drain
away.
Dismantling
Detach the water tank from the housing(13) (see the “Filling the Water Tank” chapter –
“Alternative Filling”) and pour away the rest of the water.
TROUBLESHOOTING
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps below, contact the customer
service department.
The device does not work.
The mains plug is not inserted in the plug socket correctly.
>Correct the fit of the mains plug.
The plug socket is defective.
>Try another plug socket.
The device has not been switched on via the POWER fi eld (25).
>Touch the POWER field.
The water tank (10) is empty. In this case, the pump is not working.
>Fill the water tank.
The fuse in the fuse box is triggered.
Too many devices connected to the same circuit.
>Reduce the number of devices in the circuit.
Do not attempt to repair an electrical device yourself!
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 142020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 14 03-12-2020 16:0003-12-2020 16:00

15
EN
The air is not cold.
There is not enough water in the water tank (10).
>Fill the water tank.
The water in the water tank (10) is too warm.
>Empty the water tank and top it up with fresh, cool water.
The honeycomb filters (4) are dirty.
>Clean the honeycomb filters.
The honeycomb filters (4) are worn.
>Replace the honeycomb filters.
The remote control does not work.
The batteries are empty.
>Replace the batteries.
There are obstacles between the remote control and the sensor in the device.
>Remove possible obstacles or aim the remote control at the sensor in the device
from a different position.
The distance between the remote control and the device is too great.
>Reduce the distance.
DISPOSAL
Dispose of the packaging material in an environmentally friendly manner
so that it can be recycled.
Batteries should be removed before disposing of the remote control and
disposed of separately from it at suitable collection points.
This device is governed by the European Directive 2012/19/EU on
waste electrical and electronic equipment (WEEE). Do not dispose of
this device as normal domestic waste, but rather in an environmentally
friendly manner via an offi cially approved waste disposal company.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 152020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 15 03-12-2020 16:0003-12-2020 16:00

16
TECHNICAL DATA
Article number: V07326
Device
Model number: KLP-B025
Power supply: 220 – 240 V ~ 50 Hz
Power: max. 100 W
Capacity of water tank: max. 10 l
Water consumption: 2 – 3 l / h
Max. air throughput: 2500 m³ / h
Area of application: 15 – 25 m2
Noise level: approx. 50 dB
Remote control
Power supply: 3 V (2 x 1.5 V battery AAA)
EN
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 162020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 16 03-12-2020 16:0003-12-2020 16:00

17
SYMBOLEN
SIGNAALWOORDEN
GEVAAR waarschuwt voor ernstig letsel en
WAARSCHUWING waarschuwt voor mogelij k ernstig letsel en
levensgevaar
LET OP waarschuwt voor materiële schade
DOELMATIG GEBRUIK
• Dit apparaat is bedoeld voor het koelen, bevochtigen, verfrissen en ioniseren
van lucht in binnenruimtes.
• Het apparaat is geschikt voor een oppervlak van maximaal 25 m2. Het
vervangt geen airco.
• Het apparaat is bedoeld voor privé gebruik, niet voor commerciële doeleinden.
• Gebruik het apparaat alleen voor het beschreven doeleinde en alleen zoals
beschreven in de gebruikershandleiding. Elk ander gebruik geldt als misbruik.
• Alle gebreken die ontstaan door ondeskundige behandeling, beschadiging,
verkalking of reparatiepogingen zij n uitgesloten van garantie. Dit geldt ook
voor de normale slij tage.
Lees voor gebruik deze instructies zorgvuldig door.
Gevaarsymbolen: deze symbolen wijzen op mogelijke gevaren.
Lees de bij horende veiligheidsaanwijzingen aandachtig door en
volg deze op.
Aanvullende informatie
Lees de gebruikershandleiding vóór gebruik!
Symbool voor gelij kspanning
NL
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 172020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 17 03-12-2020 16:0003-12-2020 16:00

18
VEILIGHEIDSAANWIJZINGEN
• Dit apparaat kan worden gebruikt door kinderen vanaf 8 jaar en ook door
personen met beperkte lichamelijke, sensorische of geestelij ke vermogens of
personen die niet beschikken over ervaring en / of kennis, wanneer zij onder
toezicht staan en instructies hebben gekregen hoe het apparaat op een veilige
manier kan worden gebruikt en wanneer zij de daarmee gepaard gaande
gevaren hebben begrepen.
• Kinderen mogen niet met het apparaat spelen.
• Reiniging en gebruikersonderhoud mogen niet worden uitgevoerd door
kinderen, tenzij zij onder toezicht staan.
• Het apparaat mag niet met een externe tijdschakelklok of een apart
afstandsbedieningssysteem worden ingezet.
• Het apparaat moet altijd van het net worden geïsoleerd als er niet op wordt
toegezien, bij het vullen of leegmaken van de watertank en vóór het reinigen en
de vervanging van de raatfilters.
• Voer geen veranderingen uit aan het apparaat. Wanneer het apparaat, de
netadapter of het netsnoer zijn beschadigd, dan moeten deze om gevaren te
vermijden worden vervangen door de fabrikant, de klantenservice of door een
gelijkaardig gekwalifi ceerde persoon (bijv. in een professionele werkplaats).
GEVAAR – Gevaar van een elektrische schok
• Gebruik het apparaat alleen in gesloten ruimtes en berg het alleen daar op.
• Gebruik het apparaat niet in ruimtes met een hoge luchtvochtigheid.
• Dompel het apparaat en het aansluitsnoer nooit in water of andere
vloeistoffen, en zorg ervoor dat deze niet in het water kunnen vallen of nat
kunnen worden.
• Mocht het apparaat in het water vallen of omkantelen nadat het met water
werd gevuld, onderbreek
• dan onmiddellijk de stroomtoevoer. Probeer niet om het uit het water
• te trekken terwijl het is aangesloten op het stroomnet! Laat het apparaat vóór
hernieuwde inbedrijfstelling controleren door een professionele werkplaats.
• Raak het apparaat en het aansluitsnoer nooit aan met vochtige handen als
deze componenten zijn aangesloten op het stroomnet.
NL
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 182020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 18 03-12-2020 16:0003-12-2020 16:00

19
WAARSCHUWING – Brandgevaar
• Gebruik het apparaat niet in de buurt van licht ontvlambare materialen
• (gordijnen, textiel enz.). Leg geen brandbare materialen (bij v. karton, papier,
kunststof) op het apparaat.
• Steek niets in de openingen van het apparaat en zorg ervoor dat deze niet
verstopt raken. Met verstopte openingen mag het apparaat niet worden
gebruikt.
WAARSCHUWING – Verwondingsgevaar
• Houd kinderen en dieren buiten
• het bereik van plastic zakken en folie. Er bestaat verstikkingsgevaar.
• Laat kleine kinderen en dieren niet zonder toezicht in de buurt van het
apparaat.
• Zorg ervoor dat niemand over het aansluitsnoer kan struikelen. Anders
zouden personen of het apparaat zelf kunnen vallen.
• Zorg ervoor dat het aansluitsnoer steeds buiten het bereik is van kleine
kinderen en dieren. Er bestaat gevaar van wurging.
• Batterij en kunnen levensgevaarlijk zij n als ze worden ingeslikt. Batterij en
en afstandsbediening bewaren buiten het bereik van kleine kinderen en
dieren. Roep meteen medische hulp in wanneer een batterij werd ingeslikt.
Er bestaat verwondingsgevaar door batterij zuur.
• Mocht een batterij lekken, lichaamscontact met het batterij zuur vermijden,
evt. veiligheidshandschoenen dragen. Spoel bij contact met batterij zuur de
getroffen plaatsen direct met veel schoon water en raadpleeg onmiddellij k
een arts. Er bestaat verwondingsgevaar door batterij zuur.
LET OP – Risico van materiële schade
• Leg het aansluitsnoer zo, dat het niet geplet of geknikt wordt en niet in
aanraking komt met hete oppervlakken (geldt ook voor de hete vlakken van
het apparaat!).
• Schakel het apparaat uit en trek in het geval van een fout tijdens het bedrijf
NL
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 192020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 19 03-12-2020 16:0003-12-2020 16:00

20
of vóór een onweersbui de netstekker uit het stopcontact.
• Schakel het apparaat altijd eerst uit, alvorens de netstekker uit het
stopcontact te trekken. Trek de netstekker altijd aan de stekker en nooit aan
het netsnoer uit het stopcontact!
• Trek of draag het apparaat nooit aan het aansluitsnoer.
• Kantel het apparaat niet wanneer er water in de watertank resp. de
waterschaal zit.
• Bescherm het apparaat tegen andere warmtebronnen, open vuur,
temperaturen onder nul, lang aanhoudend vocht, natheid en schokken.
• Leg of zet geen zware voorwerpen op het apparaat.
• Gebruik om de werking van het apparaat niet te benadelen en om eventuele
schade te verhinderen alleen origineel toebehoren van de fabrikant.
LET OP – Risico van materiële schade door batterij en
• Gebruik de afstandsbediening niet wanneer een batterij is uitgelopen. Neem
uitgelopen batterij en meteen uit het batterij vak.
• Vervang altijd alle batterij en. Gebruik geen verschillende types of merken
batterij en of batterij en met een verschillende capaciteit.
NL
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 202020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 20 03-12-2020 16:0003-12-2020 16:00