Bo-Camp 5818878 User manual

INSTRUCTION MANUAL
Please read these instructions carefully before using and keep for future reference.
Product: Outdoor Table Lamp
Packing: 1 x Table Lamp, 1 x USB Cable, 1x Manual
SPECIFICATIONS
Material: UV-resistant White PE plastic+Bamboo Handle
Charge: USB Cable and Solar energy
LED: 15 White LEDs
Solar Panel: 6V 1W polycrystalline silicon solar panel
Battery: 3.7V 1800MAH Li-ion battery
Temperature: -14°C –35°C
Charge time: 8 hours in bright summer, more than 8 hours when cloudy or rain
Last time: With full charge, 30% luminosity around 7.5hours; 60% luminosity around 4hours; 100% around 2.5hours.
Light: 3 positions Warm White (30% / 60% / 100%)

IP 44
WARNING
WARNING –Danger of Injury
■ Keep children and animals away from plastic bags and films. There is a danger of suffocation.
■ Do not leave small children and animals unsupervised with the product. They could knock over the lamp and injure themselves.
■ Make sure that the cable is always kept out of the reach of small children and animals. There is a danger of strangulation.
■ Make sure that the connected cable does not present a trip hazard.
WARNING –Danger of Electric Shock
■ Never touch the product and the connecting cable with wet hands when these components are connected to the mains power.
■ Never immerse the connecting cable in water or other liquids and do not expose it to rain or moisture. Only ever connect the
connecting cable to a plug socket in a dry environment.
WARNING –Danger of Fire
■ Do not use the product in rooms containing easily ignitable or explosive substances.
Never operate the product in the vicinity of a gas source.
■ Do not cover the product or the mains adapter during operation. Keep the mains
adapter away from combustible materials.
NOTICE –Risk of Damage to Material and Property
■ Only connect the mains adapter to a plug socket that is properly installed and matches the technical data of the product. The plug
socket must also be readily accessible after connection so that the connection to the mains can quickly be isolated.
■ Do not supply power to the product via a computer because the high currents that may exist could damage the computer.
■ Only ever use the product with the mains adapter that is supplied or a mains adapter that matches the technical data of the mains
adapter.
■ Never immerse the product in water or other liquids! It is only resistant to splashing.
■ To protect the electrical components from moisture, dirt and dust, always close the DC 5V socket with the cover when the lamp is
being used outdoors.
■ During extreme weather conditions (e.g. storm, hail) or if the product will not be used for a long time,switchofftheproduct andstore
it in a dry place.
■ Protect the product from: impacts, fire, frost, temperatures above 60 °C persistent moisture and wet conditions.
■ Place the product on a dry surface, a sufficient distance away from heat sources (for example ovens and heating systems).
■ Do not place or lay any heavy objects on the product or the connecting cable.
■ Lay the connecting cable in such a way that it does not become crushed or kinked and does not come into contact withhot surfaces.
■ In the event of damage / faults, disconnect the product from the mains power. Do not start using the product ifthere are visible signs
of damage or liquid has penetrated into the product.
■ Remove the mains adapter from the plug socket before a thunderstorm.
■ The product must always be disconnected from the mains power when it is left unattendedand before assembling,disassemblingor
cleaning the product.
■ Do not make any modifications to the product. If the product is damaged, it must be replaced by the manufacturer,customerservice
department or a similarly qualified person (e.g. specialist workshop).
■ Use only original spare parts from the manufacturer in order to guarantee that there is no interference that may prevent the product
from working and to avoid damage
FUNCTIONS
Switching On / Off: Hold down the ON/OFF button for 3 seconds to switch the lamp on and off.
Dimming: To alter the luminosity, briefly press the ON/OFF button several times. There are 3 dimming levels 30%-60%-100%.
USE
The battery of the lamp has to be charged up so that the LEDs can light up. If the battery is empty, this takes approx. 4 to 5 hours.
The battery can be charged both via the solar panel and with power from the plug socket, depending on whether the lamp is set up
outdoors or indoors.

INDOORS
To ensure that the battery lasts for as long as possible, the
lamp should not be switched on during charging. Disconnect it
from the mains power after charging.
1. Remove the cover from the DC 5V socket.
2. Plug the barrel connector on the cable which is also supplied
into the DC 5V socket.
3. Plug the USB connector on the cable into your mains
adapter (USE OUTPUT DC5V ADAPTOR ONLY!)
4. Connect the mains adapter to an easily accessible socket.
The charge control lamp next to the DC 5V socket lights up red
while the battery is charging. Once the battery is full, it lights up
green.
5. When the battery is charged, first pull the mains adapter out
of the plug socket and then pull the barrel connector out of the
DC 5V socket.
6. Place the cover on the DC 5V socket.
7. Switch on and operate the lamp in the manner described in the “FUNCTIONS” chapter.
OUTDOORS
1. Set up the lamp in a location where the solar panel can absorb direct sunlight all day long if possible. Do not cover the solar panel!
In the winter months or on rainy days: as the sun will not be powerful enough to properly recharge the lamp’s battery, its light will
normally only last for a few minutes.
2. Hold down the ON/OFF button for a few seconds to switch on the lamp.
• To switch off the lamp manually, hold down the On/Off button for a few seconds.
• To deactivate the daylight sensor, flfl ip the Sensor OFF / Sensor ON switch to position Sensor OFF.
TROUBLESHOOTING
If the product does not work properly, first check whether you are able to rectify the problem yourself. If the problem cannot be
solved with the following steps, contact the customer service department. Do not attempt to repair an electrical product yourself!
Problems
Problems cause
Fix
The lamp does not
switch on
The ON/OFF button is not pressed for
long enough.
Hold down the ON/OFF button for a
few seconds.
The battery is empty.
Charge the battery in the manner
described in the “Use” chapter.
The battery is not charging
in solar mode.
The solar panel is not receiving sufficient
light.
Place the lamp in the sun and make
sure that the solar panel is not
covered. e.g: the leaves.
The battery is not charging
in mains power mode. The
charge control lamp does
not light up.
The connecting cable is not connected
correctly.
Correct the connection.
The plug socket is defective.
Try another plug socket.
No mains voltage is present.
Check the fuse of the electrical
distributor (fuse box).

ENVIRONMENT:
Dispose of the packaging material in an environmentally friendly manner so that it can be recycled.
Dispose of the product with the battery inserted at a recycling centre for used electrical and electronic
devices, and not in the household waste (!).