BOERPLAY 255E292.95K.001 User manual

Sandpit
255E292.95K.001
Powered by TCPDF (www.tcpdf.org) 1 / 1

© Copyright BOERplay 29-9-2022 Revision: 255 292 95K 001
Installation instructions
Installatie-instructies
Installationsanleitung
Instrucciones de instalación
Instructions d'installation
NL
DE
ES
FR
- main dimensions
Hoofdafmetingen
Hauptabmessungen
Dimensiones principales
Dimensions principales
NL
DE
ES
FR
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
NL
DE
ES
FR
- obstacle free zone
- ground plan
NL
DE
ES
FR
Bodemplan
Bodenplan
Plan de superficie
Plan de surface

© Copyright BOERplay 29-9-2022 Revision: 255 292 95K 001
main dimensions
Hoofdafmetingen
Hauptabmessungen
Dimensiones principales
Dimensions principales
NL
DE
ES
FR
2,88 m
2,88 m
0,00 m
0,40 m
0,43 m

© Copyright BOERplay 29-9-2022 Revision: 255 292 95K 001
obstacle free zone
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
NL
DE
ES
FR
Impact area
NL
DE
ES
FR
Obstacle free zone
NL
DE
ES
FR
i
Opvangzone
Ausprallbereich
Zona de impacto
Zone d‘impact
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
5,88 m
5,88 m
R1,50m
R1,50m

© Copyright BOERplay 29-9-2022 Revision: 255 292 95K 001
ground plan
Bodemplan
Bodenplan
Plan de superficie
Plan de surface
NL
DE
ES
FR
Maaiveld
Bodennahe
Nivel del suelo
Niveau au sol
Ground level
NL
DE
ES
FR
i
0,10 m
1,50 m 2,88 m 1,50 m
1,50 m2,88 m1,50 m

© Copyright BOERplay 29-9-2022 Revision: 255 292 95K 001
Assembly manual
Montagehandleiding
Montageanleitungen
Manual de montaje
Manuel de montage
NL
DE
ES
FR
- required tools
Benodigde gereedschappen
Benötigtes Werkzeug
Herramientas requeridas
Outils nécessaires
NL
DE
ES
FR
Montagevolgorde
Montagereihenfolge
Orden de esemblado
Ordre de montage
NL
DE
ES
FR
- order of assembly
- assembly manual - module
NL
DE
ES
FR
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
MOD.255.004.xxx
x
16
MOD.255.901
x
1
MOD.255.103.K
x
1

© Copyright BOERplay Revision:
required tools
Benodigde gereedschappen
Benötigtes Werkzeug
Herramientas requeridas
Outils nécessaires
NL
DE
ES
FR
No. 17
No. 17
TX-25

© Copyright BOERplay 29-9-2022 Revision: 255 292 95K 001
order of assembly
Montagevolgorde
Montagereihenfolge
Orden de esemblado
Ordre de montage
NL
DE
ES
FR
1
/4
2
/4
MOD.255.004.xxx
MOD.255.103.K

© Copyright BOERplay 29-9-2022 Revision: 255 292 95K 001
3
/4
4
/4
MOD.255.901
BOER
PLAY
xxx.xxx.xxx
EN 1176
www.boerplay.com
Plaats op de bodem en maak passend door overtollig materiaal naar de onderzijde te vouwen
Auf der Boden legen und passend machen,durch Falten von überschüssiges Material auf die Unterseite
Colóquelo por la parte inferior y hágalo encajar doblando el exceso de material hacia la parte inferior
Placez sur le fond et adaptez-le en pliant le matériau excédentaire vers le dessous
Place on the bottom and make it fit by folding excess material to the underside
NL
DE
ES
FR

LOGBOOK
Type indication Basic Play
Article number 255E292.95K.001
Product Name Sandpit
Maximum fall height 0,5 m
Construction year 2023
Certificate 069525
Inspection body TUV Nederland QA BV
Ekkersrijt 4401
5692 DL Son
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain

7 Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area
8 Replacement parts can be ordered at the manufacturer with the OEM part numbers on the module drawing
Drawings can be found in the user guide
9 The impact area shall be provided with impact attenuating surface according to the specified falling height
•Up to 0,6m height of fall: no requirements regarding impact attenuation
•Turf, topsoil: suitable up to 1000mm height of fall
•Loose fill (sand, gravel, bark, woodchips): up to 3000mm height of fall Layer thickness is height
of fall / 10 +100mm, with a minimum of 300mm
•Synthetic surfaces (Rubber tiles, artificial turf, wetpour, tigermulch etc ): height of fall and layer
thickness according to the information of the supplier
10 This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7"
Improving the
foundations
(for equipment without concrete in the standard
foundation)
If the impact area is loose fill (sand, gravel, bark,
woodchip, etc ), or if the soil itself does not add to
stability of the equipment (i e sand, pumice, peat soil)
pour 50l of concrete per post
For instance:
Square: 0,6 x 0,6 x 0,16m
Round: ø0,35 x 0,5m
Round: ø0,50 x 0,2m

BSV.017.010.008
x
1
BSV.030.010.002
x
1
BSV.034.010.002
x
1
BSV.035.010.030
x
1
KST.DON.010.xxx
x
1
KST.DOP.010.xxx
x
1
SME.MNP.115.372
x
1
© Copyright BOERplay 5-10-2022 Revision: MOD 255 004 xxx
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
1
/1
Detail A (1x)
KST.DOP.010.xxx
BSV.017.010.008
BSV.034.010.002
BSV.030.010.002
KST.DON.010.xxx
BSV.035.010.030
SME.MNP.115.372
xxx: 060 Black
Zwart / Schwarz / Negro / Noir
xxx: 060 Black
Zwart / Schwarz / Negro / Noir

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD 255 901
Worteldoek
3x3,15
25-8-2022
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#Nr.
Lengte 3,0 m 03M011
DRM
KST21
1

© Copyright BOERplay 12-9-2022 Revision: MOD 255 103 K
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR

© Copyright BOERplay 12-9-2022 Revision: MOD 255 103 K
KST.MNP.166.RBO
x
4
KST.MNP.166.RBO
x
4
1
/ 3
4x
4x
50 mm
250 mm
50 mm
250 mm
2
/ 3
KST.MNP.166.RBO
KST.MNP.166.RBO

© Copyright BOERplay 12-9-2022 Revision: MOD 255 103 K
KST.MNP.166.RBO
x
12
12x
3
/ 3
KST.MNP.166.RBO
Powered by TCPDF (www.tcpdf.org)