
Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE BPK 261 6KP
Klimklauter 2 torens
Basic Play Kids
11-5-2021
Modules
Modules
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#Nr.
Basic Play Kidstaander 0,59m
AK
001
BPK
MOD
41
Basic Play Kidstaander 0,95m
AK
002
BPK
MOD
4
2
Basic Play KidsVloer
A004BPKMOD23
Basic Play KidsDak
G005BPKMOD14
Basic Play KidsGlijbaan polyester 0,95m
DG007BPKMOD15
Basic Play KidsRailing HMPE blanco
G008
BPK
MOD26
Basic Play KidsWand schoolbord
A
G014
BPK
MOD1
7
Basic Play KidsWand OXO
CG015BPKMOD18
Basic Play Kids
Wand schuifspel
G016BPKMOD19
Basic Play KidsLoket
G031BPKMOD110
Basic Play KidsTelbollen
G032
BPK
MOD
111
Basic Play Kidstijgbrug vormen
B
G038
BPK
MOD112
Basic Play KidsTrap 0,95m
A
G044
BPK
MOD
1
13
Basic Play KidsOploopwand schuin
A
G045
BPK
MOD
114
Basic Play KidsPaalkap 80x80
G053
BPK
MOD
4
15
Geleverde modules:
Zie tabel
Montageinstru tie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven spe ifiek de maten van de verbindingen aan
- De modules met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules zijn bemaat op de bovenkant (klimwanden, paalkappen, et .)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Bouw twee keer een toren op uit 1/2(+15), 3 en 6
3 - Assembleer de overige modules (op 5 na) met behulp van de moduletekeningen
4 - Plaats de plaat van 5, verbind deze aan twee keer 1
5 - Plaats de glijbaan van 5, verbind deze aan de plaat
6 - Plaats 7, 8, 9, 10, 11, 13 en 14, verbind deze aan twee keer 1/2
7 - Plaats 12, verbind deze tusssen twee torens aan vier keer 1/2
8 - Plaats 4, verbind deze aan vier keer 2
9 - Plaats het typeplaatje op de aangegeven positie
10 - Controleer of het toestel voldoet aan de afmetingen zoals op blad 'afmetingen'
11 - Di ht de gaten en verdi ht het zand
Controles:
1 - Corre te opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instru tion:
- The main dimensions indi ate the dimensions of the posts and floors
- The detailed dimensions show the spe ifi dimensions of the onne tions
- The modules whi h ontain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top ( limbing walls, aps for the posts, et .)
Assembly sequen e:
1 - Dig the holes a ording to the ground plan
2 - Assemble two towers out of 1/2(+15), 3 and 6
3 - Assemble the remaining modules (ex ept for 5) using the module drawings
4 - Pla e the panel of 5, atta h it to two times 1
5 - Pla e the slide of 5, atta h it to the panel
6 - Pla e 7, 8, 9, 10, 11, 13 and 14, atta h them to two times 1/2
7 - Pla e 12, atta h it between two towers to four times 1/2
8 - Pla e 4, atta h it to four times 2
9 - Atta h the identifi ation plate to the designated spot
10 - Che k that the equipment onforms to the dimensions shown on sheet 'dimensions'
11
- Close the holes and ompa t the sand
Che ks:
1 - Corre t assembly and all the fasteners
2 - Che k the dimensions of the safety area with regard to the play equipment
12 7
10
15
13
8
211
5
3 1 9
4
14
6
Typeplaatje
Identification plate
B