BOERPLAY Playchain 204 User manual

Playchain 204
PNRE000.204
Powered by TCPDF (www.tcpdf.org) 1 / 1

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 204 A
Playchain 204
Pionier
22-2-2022
Afmetingen Dimensions
0,00 m
0,24 m
0,41 m
0,91 m
1,37 m
4653
3704

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 204 A
Playchain 204
Pionier
22-2-2022
Obstakelvrije zone Obstacle free zone
Obstakelvrij WAS
Obstacle free WAS
Opvangzone
Impact area
Obstakelvrij EN-1176
Obstacle free EN-1176
7,65 m
6,70 m
6,13 m
3,65 m
R1,50 m
R1,50m
R1,50m
R1,50m
R1,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 204 A
Playchain 204
Pionier
22-2-2022
Bodemplan Groundplan
0,00 m 1,54 m 2,35 m 2,48 m 2,94 m 3,32 m 4,04 m 4,24 m 4,35 m 5,08 m 6,70 m
0,00 m
1,51 m
2,56 m
2,69 m
3,44 m
4,23 m
4,86 m
4,91 m
5,61 m
6,05 m
7,65 m
0,60 m
rondmarkering
Ground le el marker
0,53 m
0,63 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 204 A
Playchain 204
Pionier
22-2-2022
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr.
Progr.Type#
Nr.
EnkelWokkel
000325PNRMOD11
SpeelbuiKoppel tuk
000530PNRMOD52
SpeelbuiBa i tuk
000531PNRMOD13
SpeelbuiBa i tuk + lippen 000532
PNR
MOD
14
SpeelbuiHoek tuk
000533
PNR
MOD1
5
Speelbuibalan hoek
000536PNRMOD16
bui 70Einddop
A000537PNRMOD27
SpeelbuiSpringplank
C000540PNRMOD18
SpeelbuiKlimwandje
A
000542
PNR
MOD
1
9
SpeelbuiSpeelbollen x3
003543
PNR
MOD110
SpeelbuiDuikel 90 cm 000
544PNR
MOD
111
SpeelbuiSchoolbord
B
000
545PNR
MOD
1
12
SpeelbuiGlij tangen
000552
PNR
MOD113
610 58
1 3 13
9
7
7
11
12
2
4

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE PNR 000 204 A
Playchain 204
Pionier
22-2-2022
Montage Mounting
Geleverde module :
Zie tabel
Montagein tructie:
- De hoofdmaten geven de maten van de taander en vloeren aan
- De detailtekeningen geven pecifiek de maten van de verbindingen aan
- De module met buizen zijn op de tekeningen bemaat op bovenkant kopplaat
- Overige module zijn bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgen het bodemplan
2 - Plaat 3
3 - Plaat 8
4 - Verbind 8 met 2 aan 3
5 - Plaat 5
6 - Verbind 5 met 2 aan 8
7 - Plaat 10
8 - Verbind 10 met 2 aan 5
9 - Plaat 6
10 - Verbind 6 met 2 aan 10
11 - Plaat 4
12 - Verbind 4 met 2 aan 6
13 - Verbind 12 aan 4
14 - Verbind 9 en 13 aan 3
15 - Verbind 11 op de goede hoogte aan 4
16 - Verbind 1 op de goede hoogte aan 3
17 - Plaat 7 in einde bui 3
18 - Plaat 7 in einde bui 4
19 - Controleer of het toe tel voldoet aan de afmetingen zoal op blad 'afmetingen'
20 - Dicht de gaten en verdicht het zand
Controle :
1 - Correcte opbouw en alle beve tiging middelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toe tel
3 - Zorg dat de uiteinden van de wip op de demper komen
4 - De uiter te hoogte van het uiteinde van de balk (<100 cm)
Supplied module :
See table
A embly in truction:
- The main dimen ion indicate the dimen ion of the po t and floor
- The detailed dimen ion how the pecific dimen ion of the connection
- The module which contain tube are dimen ioned at the top of the flange
- Other module are dimen ioned at the top (climbing wall , cap for the po t , etc.)
A embly equence:
1 - Dig the hole according to the ground plan
2 - Place 3
3 - Place 8
4 - Attach 8 with 2 to 3
5 - Place 5
6 - Attach 5 with 2 to 8
7 - Place 10
8 - Attach 10 with 2 to 5
9 - Place 6
10 - Attach 6 with 2 to 10
11 - Place 4
12 - Attach 4 with 2 to 6
13 - Attach 12 to 4
14 - Attach 9 and 13 to 3
15 - Connect 11 at right height to 4
16 - Connect 1 at right height to 3
17 - Place 7 in end of pipe of 3
18 - Place 7 in end of pipe of 4
19 - Check that the equipment conform to the dimen ion hown on heet 'dimen ion '
20 - Clo e the hole and compact the and
Check :
1 - Correct a embly and all the fa tener
2 - Check the dimen ion of the afety area with regard to the play equipment
3 - Make ure the end of the ee aw land on the hock ab orber
4 - The maximum height of the end of the bar (<100 cm)

LOGBOOK
Type indication Pionier
Article number PNRE000.204
Product Name Playchain 204
Maximum fall height 1,0 m
Construction year 2023
Certificate 11100319321
Inspection body Liftinstituut B.V.
Buikslotermeerplein 381, A'dam
1025 XE Amsterdam
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain

7 Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area
8 Replacement parts can be ordered at the manufacturer with the OEM part numbers on the module drawing
Drawings can be found in the user guide
9 The impact area shall be provided with impact attenuating surface according to the specified falling height
•Up to 0,6m height of fall: no requirements regarding impact attenuation
•Turf, topsoil: suitable up to 1000mm height of fall
•Loose fill (sand, gravel, bark, woodchips): up to 3000mm height of fall Layer thickness is height
of fall / 10 +100mm, with a minimum of 300mm
•Synthetic surfaces (Rubber tiles, artificial turf, wetpour, tigermulch etc ): height of fall and layer
thickness according to the information of the supplier
10 This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7"
Improving the
foundations
(for equipment without concrete in the standard
foundation)
If the impact area is loose fill (sand, gravel, bark,
woodchip, etc ), or if the soil itself does not add to
stability of the equipment (i e sand, pumice, peat soil)
pour 50l of concrete per post
For instance:
Square: 0,6 x 0,6 x 0,16m
Round: ø0,35 x 0,5m
Round: ø0,50 x 0,2m