BOERPLAY SOLE030.079 User manual

SOLE030.079
Tumble bar/monkey rack

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE SOL 030 079 A
Klimklauterrek
RVS Trio
12-7-2016
BOER
SPEELTOESTELLEN
Afmetingen Dimensions
0,00 m
0,59 m
0,89 m
1,19 m
1,34 m
1,47 m
1,49 m
1,57 m
0,00 m
1,14 m
1,28 m
1,57 m
0,00m 0,05m 0,84m 2,26m 3,05m 3,10m
0,00 m
0,05 m
0,73 m
1,42 m
1,47 m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE SOL 030 079 A
Klimklauterrek
RVS Trio
12-7-2016
BOER
SPEELTOESTELLEN
Obstakelvrije Ruimte Obstacle free zone
4,11 m
3,03 m
4,01m
0,50m

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE SOL 030 079 A
Klimklauterrek
RVS Trio
12-7-2016
BOER
SPEELTOESTELLEN
Bodemplan Groundplan
1,37 m 0,79 m 1,42 m 0,79 m 1,37 m
1,43m
0,68m
0,68m
1,43m
0,25m
0,43 m
Grondmarkering
Ground level marker

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
TOE SOL 030 079 A
Klimklauterrek
RVS Trio
12-7-2016
BOER
SPEELTOESTELLEN
Modules Modules
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#Nr
TRIOKLIM/DUIKEL RVS
A
980 0SOLMOD
11
1
Typeplaatje
Identification plate
B
Geleverde modules:
Zie tabel
Montageinstructie:
- De hoofdmaten geven de maten van de staanders en vloeren aan
- De detailtekeningen geven specifiek de maten van de verbindingen aan
- De modules met bui en ijn op de tekeningen bemaat op bovenkant kopplaat
- Overige modules ijn bemaat op de bovenkant (klimwanden, paalkappen, etc.)
Montagevolgorde:
1 - Graaf de gaten volgens het bodemplan
2 - Bouw en plaats 1
3 - Controleer of het toestel voldoet aan de afmetingen oals op blad 'afmetingen'
4 - Dicht de gaten en verdicht het and
Controles:
1 - Correcte opbouw en alle bevestigingsmiddelen
2 - Controleer de afmetingen van de valbodem t.o.v. het toestel
Supplied modules:
See table
Assembly instruction:
- The main dimensions indicate the dimensions of the posts and floors
- The detailed dimensions show the specific dimensions of the connections
- The modules which contain tubes are dimensioned at the top of the flanges
- Other modules are dimensioned at the top (climbing walls, caps for the posts, etc.)
Assembly sequence:
1 - Dig the holes according to the ground plan
2 - Assemble and place 1
3 - Check that the equipment conforms to the dimensions shown on sheet 'dimensions'
4 - Close the holes and compact the sand
Checks:
1 - Correct assembly and all the fasteners
2 - Check the dimensions of the safety area with regard to the play equipment

LOGBOOK
(Onderstaand logboek kan gebruikt worden om te voldoen aan de eisen, gesteld in artikel 14 van het Warenwetbesluit Attractie- en Speeltoestellen)
Type indication Nature Play
Product code SOLE030.079
Name of equipment Duikel / klimrek RVS
Maximum height of fall 1,3 m
Year of construction 2017
Certificate 08100313233
inspection authority Liftinstituut B.V.
Buikslotermeerplein 381, A'dam - 1025 XE Amsterdam
Name manufacturer BOERplay
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
name installer
Description of equipment Tumble bar/monkey rack
Location of equipment
Data about the owner of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
Data about the administrator of the play equipment
Name:
Address:
Postcode and town:
Contact person:
Telephone number:
SOLE030.079
Tumble bar/monkey rack

LOGBOOK
Inspection and maintenance intervals
Nr.
Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and missing parts.
Inspect bolts, screws and nuts for absence, jams, corrosion
and wear.
Add missing parts, secure joints, apply missing fixing
agent and replace corroded parts.
1
2
Chec suspension for wear. Replace worn parts and/or remove non-functioning
parts.
1
3
Inspect rotating parts such as hinges, rolling-element
bearings, etc. for wear and acceptability.
Replace worn parts and/or remove non-functioning
parts.
1
4
Chec wood for splinters, unacceptable damage and signs of
rot. Especially at ground level.
Repair damage. Replace affected wood. Smoothen
splintered wood and sharp edges.
1
5
Inspect foundation for stability, tearing and coverage. Restore foundation and covering material.
3
6
Examine rubber and synthetic parts for wear, damage and
brea . Replace original parts.
3
7
Inspect metal for corrosion and damage in the coating. Restore any damaged coating (after removing rust and
applying primer).
6
Chec ropes, cables, chains and nets for wear and damage.
Steel cables and nets which are tensioned must be chec ed
for tension.
Replace parts where necessary. Steel cables and nets
must be tensioned.
3
9
Inspect equipment for unsafe changes and additions. Remove unsafe additions and correct unsafe changes.
1
10
Inspect safety surfaces. Restore and repair where necessary.
1
Remarks
1. If used intensively, all points require extra attention.
2. Extreme weather conditions and locations may require a higher inspection frequency. Discuss this with
the supplier.
3. Vandalism-sensitive locations require stricter inspections, possibly daily.
4. Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly.
Examples are poisonous plants, glass shards, etc. Frequency depends on strain.
5. Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area.
6. Replacement parts can be ordered at the manufacturer with the part numbers on the module drawing.
Drawings can be found in de user guide.
7. The impact area shall be provided with impact attenuating surface according to the specified falling
height.
. This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7".

Benaming
Title
Opmerking
Comment
Datum
Date
Tekening
Drawing
MOD SOL 030 398 A
KLIM/DUIKEL RVS
TRIO
12-7-2016
BOER
SPEELTOESTELLEN
Samenstelling module Assembly module
Opmerking
BenamingRev.Bew.
Volgnr
Progr.Type#Nr
ISO 7380 - M10 x 25BOLKOP SCHROEF 025010023BSR8
1
M10SLUITRING 002010030BSR82
6 MM ROODOPVULDOP E 030006DOPKST83
RVS 1.7 MSTAANDER DUIKELD320056SOLSME14
RVS 1.9 MSTAANDER DUIKELA320124SOLSME15
LOS
KLIMREKA
320
151
SOLSME
1
6
45 GRADENDUIKELSTANG 320152SOLSME2
7
M10 - VZ 8.8
Borgmoer
010010010BSV
4
8
M10 x 120 - VZ 8.8Zeskantbout ISO 4014 120010021BSV
4
9
100 x 100
Voetplaat
C
VZP
903
VRB
OME
4
10
1
3
2
9 8 10
5
6
4
7