Bosch WAN282E4FG User manual

washing machine
WAN282E4FG
[en] Instructions for use and
assembly
Translated from German to English - www.onlinedoctranslator.com

de
Further information and explanations can be
found online:
Table of contents
1 Security ................................... 4
1.1 General information .................... 4
8 buttons .......................................... 23
9 programs ................................ 24
10 Accessories ................................... 28
1.2 Intended
use ........................................... 4
1.3 Restriction of the user
group ........................................... 4 11 Laundry ................................... 28
11.1 Preparing laundry ............28
1.4 Safe installation ....................5
1.5 Safe use .................... 7 12 detergents and care products
tel ............................................. 29
1.6 Safe cleaning and
maintenance ........................................... 9
13 Basic operation......29
13.1 Switching on the device .................... 29
13.2 Setting the program ............. 29
2 Avoid material damage .......... 11
3 Environmental protection and saving ....... 12
3.1 Dispose of packaging............12 13.3 Adjusting program
settings................................. 29
3.2 Saving energy and
resources ........................................... 12 13.4 Loading laundry................... 29
3.3 Energy saving mode .................... 12 13.5 Using the dosing aid for liquid
detergent ........... 30
4 Setting up and connecting ..... 13
4.1 Unpacking the device.................... 13
4.2 Scope of delivery................................. 13
13.6 Using a dosing aid for liquid
detergent ......... 30
13.7 Filling in detergent and care
products ............................ 30
4.3 Requirements for the installation
site ........................................... 13 13.8 Start program................. 31
4.4 Removing transport
locks................................................. 14 13.9 Changing the activated program end
time................................. 31
4.5 Connecting the device ................... 15
4.6 Aligning the device................................ 17
13.10 Soak laundry ............31
13.11 Adding laundry................. 31
13.12 Cancel program ......... 31
5 Getting to know each other .......................... 18
5.1 Device.................................................. 18
5.2 Detergent drawer ............ 18
5.3 Control panel ................................ 19
13.13 Continuing the program when the rinse is
stopped ........................... 32
13.14 Removing laundry ............ 32
13.15 Switching off the device ............32
6 Before first use ............20
6.1 Start empty wash cycle ........... 20 14 Parental Control .......................... 32
14.1 Activate parental controls... 32
7 Display .......................................... 21 14.2 Deactivating parental
controls................................................. 32
2

de
15 Basic settings ................ 33
15.1 Overview of the basic
settings ........................... 33
15.2 Change basic settings... 34
16 program counters.............................. 34
16.1 Calling up the program counter...... 34
17 Cleaning and care ............. 34
17.1 Cleaning the drum .................... 34
17.2 Cleaning the detergent
drawer...................................... 34
17.3 Cleaning the drain pump ......... 35
18 Troubleshooting ................... 39
18.1 Emergency release .................... 49
19 Transport, storage and
Dispose of ................................ 49
19.1 Dismantling the device ................ 49
19.2 Inserting transport
locks .................................... 49
19.3 Putting the device into operation
again....................................... 49
19.4 Dispose of old device................... 50
20 Customer service .......................... 50
20.1 Product number (E-No.)
and production number
(FD)................................................... 50
21 Consumption values .................... 51
22 Technical data ................... 52
3

deSecurity
1 Security
Please note the following safety instructions.
1.1 General information
¡Read these instructions carefully.
¡Save the instructions and product information
later use or subsequent ownership.
¡Do not connect the device if it is damaged during transport.
1.2 Intended use
Use the device only:
¡about machine-washable textiles and hand-washable wool
Wash according to the care label.
¡with tap water and commercially available, machine-washable
suitable detergents and care products.
¡in private households and in closed rooms of the home
chen environment.
¡up to an altitude of 4000 m above sea level.
1.3 Restriction of the user group
This device can be used by children aged 8 years and over and by
people with reduced physical, sensory or mental capabilities or lack
of experience and/or knowledge, if they are supervised or
instructed in the safe use of the device and understand the
resulting dangers have.
Children are not allowed to play with the device.
Cleaning and user maintenance must not be carried out by
children without supervision.
Keep children under 3 years and pets away from the device.
4

Securityde
1.4 Safe Installation
WARNING - Risk of electric shock!
Improper installations are dangerous.
▶Only connect and operate the device in accordance with the
information on the nameplate.
▶Only connect the device to an alternating current power supply
via a properly installed earthed socket.
▶The protective conductor system of the electrical house
installation must be installed correctly. The installation must
have a sufficiently large cable cross-section.
▶When using a residual current circuit breaker, only use a type
with the symbol.
▶Never power the device via an external switching device,
e.g. B. timer or remote control.
▶When the device is installed, the mains plug of the mains
connection cable must be freely accessible, or if free access is not
possible, an all-pole disconnecting device must be installed in the
fixed electrical installation in accordance with the installation
regulations.
▶When setting up the device, ensure that the power cable is
not pinched or damaged.
Damaged insulation of the mains connection cable is dangerous.
▶Never bring the power cord into contact with hot parts of the
device or heat sources.
▶Never bring the power cord into contact with sharp points or
edges.
▶Never bend, squeeze or change the power cable.
WARNING - Danger of fire!
Using an extended power cord and unauthorized adapters is
dangerous.
▶Do not use extension cables or multiple socket strips.
5

deSecurity
▶Only use adapters and power cables approved by the
manufacturer.
▶If the mains connection cable is too short and a longer mains
connection cable is not available, contact a specialist electrician
to adapt the house installation.
WARNING - Risk of injury!
The heavy weight of the device can lead to injuries when lifting
it.
▶Do not lift the device alone.
If this appliance is installed improperly in a washer-dryer column,
the installed appliance may fall.
▶Stack the dryer on a washing machine using only the dryer
manufacturer's connection kit. Any other installation method is
not permitted.
▶Do not install the device in a washer-dryer column if the dryer
manufacturer does not offer a suitable connection kit.
▶Do not install devices from different manufacturers and with
different depths and widths in a washer-dryer column.
▶Do not place a washer-dryer column on a platform as the devices
can tip over.
WARNING - Danger of suffocation!
Children can pull packaging material over their heads or wrap
themselves in it and suffocate.
▶Keep packaging material away from children.
▶Do not let children play with packaging materials.
CAUTION - Danger of injury!
The device may vibrate or move during operation.
▶Place the device on a clean, flat and firm surface.
▶Align the device using the device feet and a spirit level.
6

Securityde
There is a risk of tripping if hoses and power cables are installed
incorrectly.
▶Lay the hoses and power cables so that there is no risk of
tripping.
If the device is moved on protruding components, such as: B. the
appliance door, the parts can break off.
▶Do not move the device on protruding components.
CAUTION - Danger of cutting!
Sharp edges on the device can cause cuts if touched.
▶Do not touch the device on sharp edges.
▶Use protective gloves when installing and transporting the
device.
1.5 Safe use
WARNING - Risk of electric shock!
A damaged device or a damaged power cable is dangerous.
▶Never operate a damaged device.
▶Never pull on the power cord to disconnect the device from the
power supply. Always pull on the mains plug of the mains
connection cable.
▶If the device or the mains connection cable is damaged,
immediately pull out the mains plug of the mains connection
cable or switch off the fuse in the fuse box and close the tap.
▶Call customer service. → Page 50
Penetrating moisture can cause an electric shock.
▶Only use the device in closed rooms.
▶Never expose the device to extreme heat or moisture.
▶Do not use steam cleaners, high-pressure cleaners, hoses or
showers to clean the device.
7

deSecurity
WARNING - Danger of damage to health!
Children can become trapped in the device and endanger their
lives.
▶Do not place the device behind a door that blocks or prevents
the device door from opening.
▶For old devices, pull the power plug of the power connection
cable, then cut the power connection cable and destroy the lock
on the device door to such an extent that the device door no
longer closes.
WARNING - Danger of suffocation!
Children can inhale or swallow small parts and thereby
suffocate.
▶Keep small parts away from children.
▶Do not let children play with small parts.
WARNING - Danger of poisoning!
Detergents and care products can cause poisoning if consumed.
▶If accidentally swallowed, seek medical advice.
▶Keep detergents and care products out of the reach of children.
WARNING - Danger of explosion!
If laundry has been pre-treated with cleaning agents containing
solvents, it can cause an explosion in the appliance.
▶Rinse pre-treated laundry thoroughly with water before washing.
CAUTION - Danger of injury!
If you step on or climb onto the device, the cover plate may break.
▶Do not step or climb on the device.
If you sit or lean on the open door, the device may tip over.
▶Do not sit or lean on the appliance door.
▶Do not place objects on the appliance door.
8th

Securityde
Interfering with the rotating drum can cause injury to your
hands.
▶Before taking action, wait for the drum to come to a complete
standstill.
CAUTION - Danger of scalding!
The suds become hot when washed at high temperatures.
▶Do not touch the hot soapy water.
CAUTION - Danger of chemical burns!
When you open the detergent drawer, detergent and care
products can spray out of the appliance. Contact with eyes or skin
may cause irritation.
▶If you come into contact with detergents or care products, rinse your
eyes or skin thoroughly with clean water.
▶If accidentally swallowed, seek medical advice.
▶Keep detergents and care products out of the reach of children.
1.6 Safe cleaning and maintenance
WARNING - Risk of electric shock!
Improper repairs are dangerous.
▶Only trained specialist personnel may carry out repairs on the
device.
▶Only original spare parts may be used to repair the device.
▶If the power cord of this device is damaged, it must be replaced
by the manufacturer or its customer service or a similarly
qualified person to avoid hazards.
Penetrating moisture can cause an electric shock.
▶Do not use steam cleaners, high-pressure cleaners, hoses or
showers to clean the device.
9

deSecurity
WARNING - Risk of injury!
Using non-original spare parts and accessories is dangerous.
▶Only use original replacement lines and original accessories from the
manufacturer.
WARNING - Danger of poisoning!
When using cleaning agents that contain solvents, toxic fumes can
be created.
▶Do not use cleaning agents containing solvents.
10

Avoid property damagede
If the water pressure is too low or too
high, the device function can be
impaired.
▶Ensure that the water pressure at
the water supply system is at least
100 kPa (1 bar) and maximum 1000
kPa (10 bar).
▶If the water pressure exceeds the
specified maximum value, a
pressure reducing valve must be
installed between the drinking
water connection and the hose set
of the device.
▶Do not connect the device to the
mixer tap of a non-pressurized hot
water heater.
Modified or damaged water hoses
can lead to property damage and
equipment damage.
▶Never bend, squeeze, alter or cut
water hoses.
▶Only use the water hoses supplied
or original replacement hoses.
▶Never reuse used water hoses.
Operating with dirty water or water
that is too hot can lead to property
damage and equipment damage.
▶Operate the device exclusively
with cold tap water. Unsuitable
cleaning agents can damage the
surfaces of the device.
▶Do not use harsh or abrasive
cleaning agents.
▶Do not use cleaning agents that
contain strong alcohol content.
▶Do not use hard scouring pads or
cleaning sponges.
▶Clean the device only with water
and a soft, damp cloth.
▶If you come into contact with the device,
immediately remove any detergent
residue, spray mist or residue.
2 Avoid material damage
the
DANGER!
Incorrect dosing of fabric softeners,
detergents, care products and
cleaning agents can impair the
function of the device.
▶Follow the manufacturer’s dosage
recommendations.
Exceeding the maximum load
capacity will affect the device
function.
▶Observe the maximum load capacity
for each program and do not
exceed it.
→ "Programs", page 24
The device is secured for transport
with transport locks. Transport locks
that are not removed can lead to
property damage and damage to the
device.
▶Before commissioning, completely
remove and store all transport
locks.
▶Completely install all transport
locks before each transport to
avoid transport damage.
Improper connection of the water
inlet hose can result in property
damage.
▶Tighten the screw connections on the
water inlet hand-tight.
▶Connect the water inlet hose
directly to the tap without
additional connecting elements
such as adapters, extensions or
valves.
▶Make sure that the inside
diameter of the tap is at least 17
mm.
▶Make sure that the length of the
thread at the connection to the tap
is at least 10 mm.
11

deEnvironmental protection and saving
3 environmental protection and
Save
Set the maximum spin speed if the
laundry is then to be dried in the
tumble dryer.
aDryer laundry shortens this
Drying program duration and
reduces energy consumption.
With a higher spin speed, the
residual moisture in the laundry
decreases and the volume of the
spinning noise increases.
3.1 Dispose of packaging
The packaging materials are
environmentally friendly and recyclable.
▶Dispose of the individual components
separately according to type.
3.2 Save energy and resources Wash laundry without prewashing.
aWash with prewash
extends the program duration and
increases energy and water
consumption.
If you follow these instructions, your
device will use less electricity and
water.
Use programs with low temperatures
and longer washing times and use the
maximum load capacity.
The device has an automatic quantity
control.
aThe automatic quantity adjustment fits
Water consumption and program
duration optimally adapt to the type
of textile and the load quantity.
aThe energy consumption and water
server consumption is the most efficient.
Dose detergent according to the
degree of soiling of the laundry. 3.3 Energy saving mode
If you do not use the device for a long
time, it automatically switches to
energy saving mode. The energy
saving mode is ended by operating
the device again.
aFor light to normal dirt
A smaller amount of detergent is
sufficient. Follow the detergent
manufacturer’s dosage
recommendations.
Reduce washing temperature for
lightly and normally soiled laundry.
aAt lower temperatures,
the device requires less energy.
For light to normal soiling, lower
temperatures than those specified
on the care label are sufficient.
12

Setting up and connectingde
A notice:The device was tested at the
factory to ensure that it functions
properly. This can leave water stains
in the device. The stains disappear
after the first wash.
4 Set up and
Connect
4.1 Unpack the device
The delivery consists of: ¡
washing machine
¡Supporting documents
¡Transport locks
→ "Remove transport locks",
page 14
¡Cover caps
¡Water inlet hose
→ "Connecting the water inlet
hose", page 15
DANGER!
Objects left in the drum that are not
intended to operate in the device can
cause property damage and damage
to the device.
▶Remove these items and included
accessories from the drum before
operation.
1.Completely remove packaging material
and protective covers from the device. 4.3 Requirements for the
installation location
→ "Dispose of packaging",
page 12
WARNING
Danger of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶Do not operate the device without a
cover plate.
2.Check the device for visible damage.
3.Open the door.
4.Remove the accessories from the
drum.
5.Close the door.
4.2 Scope of delivery WARNING
Risk of injury!
When operating on a base, the device
may tip over.
▶Before using the device feet on a
base, be sure to secure them with
the retaining tabs → Page 28 of the
manufacturer.
After unpacking, check all parts for
transport damage and that the
delivery is complete.
DANGER!
Operation with incomplete or
defective accessories can impair the
device function or lead to property
damage and device damage.
▶Do not operate the device with
incomplete or defective
accessories.
▶Replace relevant accessories before
operating the device.
→ "Accessories", page 28
DANGER!
Freezing residual water in the
device can lead to device damage.
▶Do not set up and operate the
device in areas at risk of frost or
outdoors.
13

deSetting up and connecting
If the device is tilted beyond 40°,
residual water in the device may leak
and cause property damage.
▶Tilt the device carefully.
▶Transport the device standing up.
4.4 Remove transport locks
The device is secured for transport
with transport locks on the back of
the device.
Installation location
base
Requirements A notice:Save the screws of the
transport locks and the sleeves for
later transport.
→ "Inserting transport locks", page 49
The device with
retaining tabs
→ Page 28 be-
consolidate.
1.Pull the hoses out of the holders.
Wooden beam ceiling Place the device on
a water-based
permanent wooden
plate (thickness
at least 30 mm)
set up, the
firmly attached to
the floor
is screwed.
kitchenette The device only
under
existing work
set up the plate,
which are firmly connected
to the neighboring cabinets
ken connected
is. Required
Niche width:
60cm.
2.Loosen and remove all screws of the
4 transport locks with a wrench size
13.
On a wall No mains connection
final line
and no
hoses between
chen wall and
clamp the device
men.
14

Setting up and connectingde
3.Remove the power cable from the
holder.
6.Push the 4 cover caps down.
4.Remove the 4 sleeves. A notice:To insert the transport locks
into the device for transport, repeat
these steps in reverse order.
4.5 Connect the device
Water inlet hose
connect
A notice:Make sure that you connect
the device to a water inlet with a
safety device against drinking water
contamination due to backflow
(according to DIN EN 1717). The
connection valves/water taps
provided for this purpose are
equipped with this safety device if the
house is installed correctly.
5.Insert the 4 cover caps.
15

deSetting up and connecting
1.Connect the water inlet hose to the
device.
A notice:Pay attention to the pumping
heights.
The maximum pumping height is
100 cm.
siphon The connection
place with one
Hose clamp
(24-40 mm)
chern.
Bathroom sink The water drain
running hose with
a manifold
fix and secure
chern.
→ "Accesories",
Page 28
2.Connect the water inlet hose to the
tap (26.4 mm = 3/4").
plastic pipe
with rubber sleeve
or drain
The water drain
running hose with
a manifold
fix and secure
chern.
→ "Accesories",
Page 28
3.Open the tap carefully and check
whether the connection points are
tight.
Connect the device electrically
A notice:Your home electrical
installation for this device must
comply with local legal and safety
regulations and should include a
residual current circuit breaker.
Water drain connection types
The information will help you connect
this device to the water drain.
1.Plug the power plug of the device's
power cord into a socket near the
device.
DANGER!
When pumping out, the water drain
hose is under pressure and can detach
from the installed connection point.
▶The water drain hose against
secure eyelets.
The connection data for the device
can be found in the technical data
→ Page 52 .
unintentional L 2.Check that the power plug is firmly
seated.
16

Setting up and connectingde
4.6 Align the device 3.Tighten the lock nuts hand-tight
against the housing using a size 17
wrench.
To reduce noise and vibration and
prevent the device from wandering,
align the device correctly.
1.Loosen the locknuts clockwise
using a size 17 wrench.
Hold the device base firmly and
do not adjust its height.
2.To align the device, turn the device
feet. Check the alignment with a
spirit level.
All device feet must be firmly on
the floor.
17

deGet to know
5 Getting to know each other
5.1 Device
Here you will find an overview of the components of your device.
3 4 5 6
277
1
Depending on the device type, details in the image may vary, e.g. B. Color and
shape.
1Maintenance flap for the caustic
pump → See 35
p
it
e7Transport locks
→ Page 14
2door 5.2 Detergent drawer
3Detergent ublade
→ Page 18
cH A notice:Please note the manufacturer's
information on the version
Dosage of washing
means and the information in the
program descriptions.
→ "Programs", page 24
4we
with
ndation and
telephone and care
Control panel → Page 19
5Water drain hose
→ Page 16
f c
6Mains connection cable
→ Page 16
18

Get to knowde
1Chamber II: Detergent for
the main wash
2Chamber: fabric softener
3Chamber I: detergent for pre-
washing
1 2 3
5.3 Control panel
You can use the control panel to set all of your device's functions and receive
information about its operating status.
2 3
1 1
4
1Programs →
Page 24
Program selector → Page 29
Display →
2m
3
Page 21
4Touchen →
Page 2 3
19

de use
G6
use
Before the first
use
5.Pour heavy-duty detergent containing
bleach into compartment II.
Gb
use
prepare the device for use.
6.1 Start the empty wash cycle
Your device has been thoroughly
tested before leaving the factory. To
remove possible residual water, wash
without laundry for the first time.
1.Open the program selectorClean
drum / Nettoyage tambourplace.
To avoid foaming, use only half the
amount of detergent recommended
by the detergent manufacturer for
light soiling. Do not use wool
detergent or mild detergent.
2.Close the door.
3.Pull out the detergent drawer.
4.Fill approximately 1 liter of tap water
into chamber II. 6.Slide in the detergent drawer.
7.To start the program, click on Start/
Bijvullen / Départ/Rajout press.
aThe display shows the remaining
Program duration.
aThe display shows according to program
mende: "End" .
8th.Start the first wash cycle or turn
the program selector on Uit /
Arrêtto turn off the device.
→ "Basic Operation", page 29
20