Bosch WAS 24462 User manual

1 2 3 4 5 6
c:c- 90 °C °CSelect Temperatur (:= cold)
1 - 24 Programme end after
c- 1,200* Select the spin speed (* depending on the model) or
(Rinse Hold = no Final spin, laundry remains in the water
after the final rinse).
Status indicators Programme sequence indicators:
þüüccWash, rinse, spin, programme duration or end
Rinse Hold reached
Childproof lock apage 5
Programme selectorDisplay panel/
options buttons
Start/
Reload
Additional
functions
Sorting and loading the laundry
Please note the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe important information apage 9.
Insert large and small items of laundry.
Close the door. Ensure that items are not trapped
between the door and rubber seal.
Adding detergent and care products
Measure according to:
Amount of laundry, soiling, water hardness
(ask your water supply company) and manufacturer's instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
Be careful when opening the detergent drawer
while the machine is in operation.
Individual settings
ʑAudible signal
ʑ$Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
2. Set the volume
for ...
1. Activate the
mode for
setting the
signal
volume
Set to •1 step, the
display panel
lights up
Press and
hold +1 step,
release
Set to •
skip
Button signals Information signals
Set the
volume*
1 step Set the
volume*
* you may need to
select the function
several times.
Insert for liquid detergent (depending on model), page 10.
Compartment II: detergent for main wash,
water softener, bleach, stain remover
Your washing machine Intended use
Contents Page
ʋIntended use ......................................................................................1
ʋProgrammes ...................................................................................... 1
ʋSetting and adjusting the programme .......................................... 3
ʋWashing .......................................................................................... 3/4
ʋAfter washing ..................................................................................... 4
ʋIndividual settings ......................................................................... 5/6
ʋOverview of programmes ................................................................ 7
ʋSafety instructions ............................................................................. 8
ʋConsumption values ......................................................................... 8
ʋImportant information ...................................................................... 9
ʋInsert for liquid detergent .............................................................. 10
ʋCare ...................................................................................................10
ʋInformation on the display panel ................................................. 10
ʋInstructions for blockages ............................................................. 11
ʋWhat to do if ... .................................................................................12
ʋEmergency release ..........................................................................13
ʋAfter-sales service............................................................................ 13
Environmental protection/Conservation tips
– Always fil l the washing machine with a maximum amount of laundry for the relevant
programme.
– Wash normal ly soiled laundry without a prewash.
– Instead of LFCottons 90 °C, select the LFCottons 60 °Cprogramme along
with the additional jEcoPerfect function. Comparable cleaning with significantly
lower energy consumption.
– Measure the detergent accordi ng to the manufacturer's instructions and water
hardness.
– If the laun dry is then dried in the tumble dryer, select the appropriate spin speed
according to the instructions of the dryer manufacturer.
Preparation Before washing for the first time
Wash once without any laundry apage 9.
Setting** and adjusting programmes 1
2
Washing
Compartment ~: fabric softener, starch
Compartment I: detergent for Prewash
ʋFor domestic use only
ʋfor machine-washable fabrics and hand-washable wool
in detergent solution,
ʋTo be operated with cold mains water and commercially
available detergents and care products which are
suitable for use in washing machines.
– Do not leave children unattended near the
washing machine
– The washing machine is not to be used by
children or persons not familiar with the operating
instructions
– Keep pets away from the washing machine.
Dilute viscous fabric softener and fabric conditioner with
water. This prevents blockages.
Detergent drawer
with compartments I, II, ~Control panel
Washing machine
doorhandle
Service flap
Washing machine door
Correct installation according to the
separate installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connect the mains plug
– Make sure your hands are dry.
– Take hold of the plug only.
Turn the tap on
**If the symbol flashes on the
display panel, the Childlock is active
aTo deactivate, see page 5.
Additional functions and options buttons
aIndividual settings, page 5.
Press $Start/Reload
Washing
Programme has ended when ...
... $Start/Reload is off and appears in the display panel.
Cancel the programme
Programmes at high temperatures:
– To cool the laundry do wn: Select Rinse.
– Select $Start/Reload.
Programmes at lower temperatures:
– Select Spin or >Empty.
– Select $Start/Reload.
Change the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select $Start/Reload. The n ewp rogramme starts from scratch.
Reloading laundry, if ... apage 5
$Start/Reload is selected, and then YES lights up in the display panel
and $Start/Reload flashes. If NO lights up, the door cannot be
opened.
Do not leave the washing machine door open for a prolonged
period, as water from the laundry could leak out.
Select $Start/Reload.
Individual settings
ʑOptions buttons
The spin speed and temperature can be changed before and during the selected programme
runs. Effects depend on the programme progress.
ʑ°C(Temperature )
The washing temperature displayed can be modified. The maximum washing temperature
that can be selected depends on the programme that has been set.
ʑ(Finished in)
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The “Finished in“ time can be set in
increments of one hour up to a maximum of 24 hours. Press the button repeatedly until
the desired number of hours is displayed (h = hours). Select $Start/Reload.
ʑ(Spin speed) / c(Rinse Hold = no Final spin)
You can change the spin speed displayed or select c(Rinse Hold = no Final spin, laundry
remains in the water after the final rinse display panel). The maximum selectable spin
speed depends on the model and on which programme is currently selected.
ʑAdditional functions aand overview of programmes, page 7
iSpeedPerfect Washes in a shorter time but with a washing outcome comparable to
that of the standard programme. Maximum load aOverview of
programmes, page 7.
jEcoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
S(Easy-iron) Special spin sequence with subsequent fluffing. Gentle Final spin at
reduced speed - residual moisture in the laundry slightly increased.
=(Water Plus) Increased water level. Gentler treatment of the laundry..
ʑChildproof lock and reloading
Childlock/
appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
Activation/Deactivation:After the programme has started/finished,
press and hold $Start/Reload for 5 seconds.
Note: the Childlock remains activated until the start of the next
programme, even after the machine has been switched off.
Then deactivate the Childlock after the machine has been switched
back on.
YES
Reload
If you want to add subsequent items of laundry after the programme
has started, press $Start/Reload. The machine checks whether
reloading is possible.
If YES lights up and $Start/Reload flashes, reloading is possible.
NO flashing: wait until YES lights up.
Note: do not open the door until YES lights up.
NO: reloading not possible.
Note: for safety reasons, the washing machine door remains locked
when the water level and/or temperature is high,
or during a spin cycle.
To continue the programme, press $Start/Reload.
Programme selector for
switching the machine on and
off and for selecting the pro-
gramme. Can be turned in
either direction.
All buttons are sensitive and
need only to be touched lightly.
If you press and hold the
(Finished in)option button,
the appliance automatically
runs through the settings
options.
3
Programmes
Detailed overview of programmes apage 7.
Temperature and spin speed can be selected individually,
depending on the selected programme and programme
progress.
Cottons LFHard-wearing fabrics
+ Prewash 7Hard-wearing fabrics, prewash at 30 °C
Easy-Care IEasy-care fabrics
+ Prewash 7Easy-care fabrics, prewash at 30 °C
Mix LIFDifferent types of laundry
Delicate/Silk Delicate washable fabrics
:øWool /Hand/machine-washable wool
Rinse Extra rinse with Spin
Spin Extra spin with selectable spin speed
Empty >Drain the rinsing water when cis activated
(Rinse Hold = no Final spin)
Reduced Spin Extra spin with reduced spin speed
SuperQuick 15’ @SuperQuick programme
Sensitive Hard-wearing fabrics, longer washing and
additional rinsing for particularly sensitive skin
Sports, Fitness $Fabrics made from microfibre
Easy-Care + JDark-coloured fabrics
Switch off the appliance
Turn the programme selector to Off.
Turn the tap off
Not required for AquaStop models aInstallation instructions, page 7.
Remove the washing
Open the washing machine door and remove the washing.
If (Rinse Hold) = no Final spin is active: Turn the programme selector
to >Empty or cSpin. Select spin speed where necessary.
Press $Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the was hing machine door and detergent drawer open
so that any residual water can dry away.
Congratulations - you have opted for a modern, high-quality
domestic appliance manufactured by Bosch. This washing machine
is distinguished by its economical water and energy consumption.
Each machine that leaves our factory is inspected thoroughly to
ensure that it functions properly and is in perfect condition.
For further information about products, accessories, spare parts and
services visit our web site www.bosch-home.com or contact our
after-sales service centres.
7
Overview of programmes aCheck the consumption values table on page 8 and the instructions on page 9.
* reducedload with additional iSpeedPerfect function.
For a short programme,cLIFMix 40 °C with max. spin speed is ideal.
Programmes with no prewash - place detergent into compartment II, programmes with prewash - divide detergent between compartments Iand II.
Programmes °C max. Type of laundry Additional functions; options; notes
Cottons LF:- 90 °C
8 kg/
5 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen iSpeedPerfect*,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold)
+ Prewash 7Sensitive :- 60 °C Hard-wearing fabrics made of cotton or linen iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold); for particularly sensitive skin, longer washing at the
selected temperature, higher water level, extra rinse
Easy-Care I:- 60 °C
3.5 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold)
+ Prewash 7Mix LIF:-40 °C Fabrics made of cotton or easy-care fabrics iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold); different types of laundry can be washed together
Easy-Care + J:c- 40 °C Dark-coloured fabrics made of cotton and dark
easy-care fabrics iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
(Rinse Hold); reduced rinsing and Final spin
Delicate/Silk :- 40 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains) iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold); no spin cycles between the rinse cycles
:Wool O:- 40 °C Hand or machine-washable fabrics made of wool
or containing wool c(Rinse Hold); particularly gentle wash programme that prevents the laun-
dry from shrinking, longer programme breaks (fabrics rest in the detergent solution)
SuperQuick 15’ @:- 40 °C Easy-care fabrics made of cotton, linen,
synthetic fibres or blended fabrics c(Rinse Hold); short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Sports, Fitness $:- 40 °C Fabrics made from microfibre iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold)
Additional programmes Rinse, Spin, >Empty, cReduced Spin
1209 / 9000506592 *506592* WAS24462BY
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
Downloaded From WashingMachine-Manual.com Manuals

8
Safety instructions
– Read the Instruction manual and Installation instructions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Only insert/pull out the mains plug with dry hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and putting their lives in
danger.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand before washing.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Additional function Load Electricity
consumption*** Water*** Programme
duration***
Cottons LF30 °C** 8 kg 0.35 kWh 76 l 2:20 h
Cottons LF40 °C** 8 kg 0.97 kWh 76 l 2:30 h
Cottons LF60 °C** 8 kg 1.47 kWh 76 l 2:40 h
Cottons LF60 °C jEcoPerfect*8 kg 1.03 kWh 56 l 3:25 h
Cottons LF90 °C 8 kg 2.34 kWh 87 l 2:30 h
Mix LIF40 °C** 3.5 kg 0.47 kWh 49l 1:01 h
Easy-Care I40 °C** 3.5 kg 0.55 kWh 55l 1:43 h
Delicate/Silk :c(cold) 2 kg 0.04 kWh 35 l 0:41 h
Delicate/Silk 30 °C 2 kg 0.14 kWh 35 l 0:41 h
:øWool O:c(cold) 2 kg 0.06 kWh 40 l 0:40 h
:øWoolüO30 °C 2 kg 0.16 kWh 40 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing with the currently valid version of EN60456.
Note for comparative testing: to test using the test programmes, wash using the specified load amount and maximum spin
speed.
Select the LIFMix 40 °C programme and maximum spin speed as the short programme for coloureds.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient
temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected
additional functions.
9
Important information
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap.
Add the following to compartment II:
– approx. 1 litre water
– detergent (dosage according to the manufacturer's instructions for light soiling and the
appropriate degree of water hardness)
Set the programme selector to Easy-Care 60 °C and select $Start/Reload.
At the end of the programme, turn the programme selector to Off.
Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Loading the laundry
Insert large and small items of laundry.
Take care not to trap items of laundry between the washing machine door and the rubber
seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light No prewash. The iSpeedPerfect function can also be selected if desired.
Pretreat any stains as necessary.
heavy Insert less laundry. Select Prewash with the programme.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to LFCottons 30 °C and press
$(Start/Reload). After approx. 10 minutes, press $Start/Reload to pause the pro-
gramme. Once the required soaking time has elapsed, press $Start/Reload again to
continue the programme, or select a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes using liquid starch. Pour the starch into
the ~fabric softener compartment according to the manufacturer's instructions (if necessary
clean it first).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions. Do not bleach laundry in the washing
machine.
10
Insert for liquid detergent model-dependent
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely -> page 10.
– Slide the insert forwards.
Do not use the insert (slide upwards):
– for gel detergents and washing powder,
– for programmes with 7+ Prewash or the (Finished in) option
Care
ʑMachine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert, push the insert up from below with
your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can
evaporate.
ʑDrum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
ʑDescaling Ensure there is no laundry in the machine
This is not necessary if the detergent is dosed correctly. However, if it is necessary, follow the
instructions of the descaler manufacturer. Suitable descaling products can be purchased
from our website or after-sales service (apage 13).
Information on the display panel depending on model
F: 16 Close the door properly; laundry may be trapped.
F: 17 , 29 Open the tap fully, supply hose kinked/trapped; clean the filter apage 11,
water pressure too low.
F: 18 Detergent solution pump blocked; clean detergent solution pump
apage 11.
Drainage hose/waste pipe blocked; clean the drain hose on the siphon
apage 11.
F: 23 Water in the base tub, appliance leaking. Call the after-sales service.
F: 34 Cannot lock washing machine door. Open the door and close it again so that
you can hear it "click"; switch the appliance off and on again; set the
programme and make individual settings; start the programme.
Other displays Switch off the appliance, wait 5 seconds and switch on again. If the same
display appears again, call the after-sales service apage 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off, disconnect the mains plug.
1. Open and remove the service flap.
2. Remove the drainage hose from its holder.
Remove the sealing cap and allow the solution to drain out.
Put the sealing cap back in place.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump housing
(the impeller in the detergent solution pump must be able to rotate).
5. Put the pump cover back in place and screw it tight. The handle
should stand vertically. Insert the drainage hose into its holder.
6. Refit the service flap and close it.
To prevent detergent from flowing down the drain unused during the next wash cycle:
pour 1 litre of water into compartment II and start the >Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off, disconnect the mains plug.
1. Loosen the hose clamp, remove the drainage hose carefully
(residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose
clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the AquaStop safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (apart from cSpin/ >Empty).
3. Press $Start/Reload. Allow the programme to run for approx.
40 seconds.
4. Turn the programme selector to Off. Remove the mains plug from
the socket.
To clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose from the back of the appliance,
Remove the filter using pliers and clean the filter.
6. Connect the hose and check for leaks.
Risk of scalding
– Allow the detergent solution to cool down.
– Turn off the tap.
12
What to do if ...
ʑWater is leaking out. – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–$Start/Reload not selected?
– Tap not turned on?
– Filter may be blocked. Clean the filter apage 11.
– Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
– Safety function active. Programme terminated? apage 4.
–(Rinse Hold) = without Final spin selected? apage 3,4.
– Can be opened by emergency release only? apage 13.
ʑProgramme does not
start.
–$Start/Reload or (Finished in) time selected?
– Washing machine door closed?
– Childlock active? Deactivate it apage 5.
ʑDetergent solution does
not drain.
–(Rinse Hold) = without Final spin selected? apage 3,4.
– Clean the detergent solution pump apage 11.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault - water below the visible area.
ʑUnsatisfactory spin
result.
Laundry wet/too damp.
– Not a fault - the unbalanced-load detection system has cancelled
the spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the
drum.
–S(Easy-iron) selected? apage 5.
– Selected speed too low? apage 5.
ʑDrum spins gently
several times.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance.
ʑResidual water in the 0compartment for care
products.
– Not a fault - the action of the care product is not affected.
– Clean the insert if necessary apage 10.
ʑOdour formation in the
washing machine.
– Run the LFCottons 90 °C programme with no load inserted.
Use standard detergent.
ʑStatus display³þflashes.
Appliance has detected
a detergent overload.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre water and pour
into compartment II (not with outdoor or down fabrics).
– Reduce the detergent dosage for the next wash cycle.
ʑLoud spinning, vibrations
and “walking” during the
spin cycle.
– Appliance feet fixed?
Secure the appliance feet aInstallation instructions.
– Transport braces removed?
Remove the transport braces aInstallation instructions.
ʑDisplay panel/indicator
lamps do not function
during operation.
– Power cut?
– Circuit breakers tripped? Reset/replace the circuit breakers.
– If the fault occurs repeatedly, call the after-sales service.
ʑProgramme sequence
longer than usual.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance by repeatedly redistributing the laundry.
– Not a fault - foam detection system active - adds an additional
rinse cycle.
ʑDetergent residues on
the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues.
– Use the Rinse cycle or brush out the laundry after washing.
13
What to do if ...
ʑin Reload mode,
$Start/Reload flashes
very quickly and an
audible signal sounds
– Water level too high. Not possible to reload laundry.
Close door immediately if open.
– To continue the programme, press $Start/Reload.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales service apage 13.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is restored. However, if the laundry has to
be removed, the washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. Allow them to cool down.
Do not reach inside the drum if it is still turning.
Do not open the door if you can see water through the glass.
1. Turn the programme selector to Off and disconnect the mains
plug.
2. Drain the detergent solution apage 11.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑIf you cannot rectify the fault yourself (Troubleshooting apage 12, 13), please contact our
after-sales service. We will always find a suitable solution and will avoid a visit from a service
technician wherever possible.
ʑThe contact details for all countries can be found in the enclosed after-sales
service directory.
ʑPlease give the After-sales service the product number (E-Nr.) and the production number
(FD) of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machine door*/the
service flap* (after opening it) and the rear of
the appliance.
*depending on model
ʑRely on the professionalism of the manufacturer. Please contact us.
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your appliance.
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before
operating the washing machine.
Downloaded From WashingMachine-Manual.com Manuals

1 2
c:c- 90 °C °CSelect Temperatur (:= cold)
1 - 24 Programme end after
c- 1,200* Select the spin speed (* depending on the model) or
(Rinse Hold = no Final spin, laundry remains in the wat
after the final rinse).
Status indicators Programme sequence indicators:
þüüccWash, rinse, spin, programme duration or end
Rinse Hold reached
Childproof lock apage 5
Programme selectorDisplay panel/
options buttons
Additional
functions
aa
Pour liquid detergent into the appropriate dispenser a
ʑʑ$
Insert for liquid detergent (depending on model), page 10.
Compartment II: detergent for main wash,
water softener, bleach, stain remover
Your washing machine Intended use
Contents Page
ʋIntended use ...................................................................................... 1
ʋProgrammes ...................................................................................... 1
ʋSetting and adjusting the programme .......................................... 3
ʋWashing .......................................................................................... 3/4
ʋAfter washing ..................................................................................... 4
ʋIndividual settings ......................................................................... 5/6
ʋOverview of programmes ................................................................ 7
ʋSafety instructions ............................................................................. 8
ʋConsumption values ......................................................................... 8
ʋImportant information ...................................................................... 9
ʋInsert for liquid detergent .............................................................. 10
ʋCare ...................................................................................................10
ʋInformation on the display panel .................................................10
ʋInstructions for blockages .............................................................11
ʋWhat to do if ... .................................................................................12
ʋEmergency release ..........................................................................13
ʋAfter-sales service............................................................................13
Environmental protection/Conservation tips
– Always fill the washing machine with a maximum amount of laundry for the relevant
programme.
– Wash normally soiled laundry without a prewash.
– Instead of LFCottons 90 °C, select the LFCottons 60 °C programme along
with the additional jEcoPerfect function. Comparable cleaning with significantly
lower energy consumption.
– Measure the detergent according to the manufacturer's instructions and water
hardness.
– If the laundry is then dried in the tumble dryer, select the appropriate spin speed
according to the instructions of the dryer manufacturer.
Preparation a
Compartment ~: fabric softener, starch
Compartment I: detergent for Prewash
ʋFor domestic use only
ʋfor machine-washable fabrics and hand-washable wool
in detergent solution,
ʋTo be operated with cold mains water and commercially
available detergents and care products which are
suitable for use in washing machines.
– Do not leave children unattended near the
washing machine
– The washing machine is not to be used by
children or persons not familiar with the operating
instructions
– Keep pets away from the washing machine. ~Correct installation according to the
separate installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connect the mains plug
– Make sure your hands are dry.
– Take hold of the plug only.
Turn the tap on aa$$$>$$a$$$ʑʑʑ$ʑccʑaiajS=ʑ$$$$Programmes
Detailed overview of programmes apage 7.
Temperature and spin speed can be selected individually,
depending on the selected programme and programme
progress.
Cottons LFHard-wearing fabrics
+ Prewash 7Hard-wearing fabrics, prewash at 30 °C
Easy-Care IEasy-care fabrics
+ Prewash 7Easy-care fabrics, prewash at 30 °C
Mix LIFDifferent types of laundry
Delicate/Silk Delicate washable fabrics
:øWool /Hand/machine-washable wool
Rinse Extra rinse with Spin
Spin Extra spin with selectable spin speed
Empty >Drain the rinsing water when cis activated
(Rinse Hold = no Final spin)
Reduced Spin Extra spin with reduced spin speed
SuperQuick 15’ @SuperQuick programme
Sensitive Hard-wearing fabrics, longer washing and
additional rinsing for particularly sensitive skin
Sports, Fitness $Fabrics made from microfibre
Easy-Care + JDark-coloured fabrics
a>c$
Congratulations - you have opted for a modern, high-quality
domestic appliance manufactured by Bosch. This washing machine
is distinguished by its economical water and energy consumption.
Each machine that leaves our factory is inspected thoroughly to
ensure that it functions properly and is in perfect condition.
For further information about products, accessories, spare parts and
services visit our web site www.bosch-home.com or contact our
after-sales service centres.
aicLIFLF:ijS=c7:ijS=cI:ijS=c7LIF:ijS=cJ:cijS=:ijS=c:O:c@:c$:ijS=c>c
Downloaded From WashingMachine-Manual.com Manuals

3 4
c:c:= cold)
cSelect the spin speed (* depending on the model) or
(Rinse Hold = no Final spin, laundry remains in the water
Status indicators Programme sequence indicators:
þüüccWash, rinse, spin, programme duration or end
aProgramme selector Start/
Reload
Sorting and loading the laundry
Please note the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe important information apage 9.
Insert large and small items of laundry.
Close the door. Ensure that items are not trapped
between the door and rubber seal.
Adding detergent and care products
Measure according to:
Amount of laundry, soiling, water hardness
(ask your water supply company) and manufacturer's instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
Be careful when opening the detergent drawer
while the machine is in operation.
ʑʑ$
ʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFjBefore washing for the first time
Wash once without any laundry apage 9.
Setting** and adjusting programmes 1
2
Washing
~ʋʋʋ
Dilute viscous fabric softener and fabric conditioner with
water. This prevents blockages.
Detergent drawer
with compartments I, II, ~Control panel
Washing machine
doorhandle
Service flap
Washing machine door
**If the symbol flashes on the
display panel, the Childlock is active
aTo deactivate, see page 5.
Additional functions and options buttons
aIndividual settings, page 5.
Press $Start/Reload
Washing
Programme has ended when ...
... $Start/Reload is off and appears in the display panel.
Cancel the programme
Programmes at high temperatures:
– To cool the laundry down: Select Rinse.
– Select $Start/Reload.
Programmes at lower temperatures:
– Select Spin or >Empty.
– Select $Start/Reload.
Change the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select $Start/Reload. The new programme starts from scratch.
Reloading laundry, if ... apage 5
$Start/Reload is selected, and then YES lights up in the display panel
and $Start/Reload flashes. If NO lights up, the door cannot be
opened.
Do not leave the washing machine door open for a prolonged
period, as water from the laundry could leak out.
Select $Start/Reload.
ʑʑʑ$ʑccʑaiajS=ʑ$$$$Programme selector for
switching the machine on and
off and for selecting the pro-
gramme. Can be turned in
either direction.
All buttons are sensitive and
need only to be touched lightly.
If you press and hold the
(Finished in)option button,
the appliance automatically
runs through the settings
options.
3
aLF7I7LIF:ø/>c@$JSwitch off the appliance
Turn the programme selector to Off.
Turn the tap off
Not required for AquaStop models aInstallation instructions, page 7.
Remove the washing
Open the washing machine door and remove the washing.
If (Rinse Hold) = no Final spin is active: Turn the programme selector
to >Empty or cSpin. Select spin speed where necessary.
Press $Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent drawer open
so that any residual water can dry away.
aicLIFLF:ijS=c7:ijS=cI:ijS=c7LIF:ijS=cJ:cijS=:ijS=c:O:c@:c$:ijS=c>c
Downloaded From WashingMachine-Manual.com Manuals

5 6
c:c:cþüüccaaaIndividual settings
ʑAudible signal
ʑ$Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
2. Set the volume
for ...
1. Activate the
mode for
setting the
signal
volume
Set to •1 step, the
display panel
lights up
Press and
hold +1 step,
release
Set to •
skip
Button signals Information signals
Set the
volume*
1 step Set the
volume*
* you may need to
select the function
several times.
ʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFja~ʋʋʋ~aa$$$>$$a$$$Individual settings
ʑOptions buttons
The spin speed and temperature can be changed before and during the selected programme
runs. Effects depend on the programme progress.
ʑ°C(Temperature )
The washing temperature displayed can be modified. The maximum washing temperature
that can be selected depends on the programme that has been set.
ʑ(Finished in)
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The “Finished in“ time can be set in
increments of one hour up to a maximum of 24 hours. Press the button repeatedly until
the desired number of hours is displayed (h = hours). Select $Start/Reload.
ʑ(Spin speed) / c(Rinse Hold = no Final spin)
You can change the spin speed displayed or select c(Rinse Hold = no Final spin, laundry
remains in the water after the final rinse display panel). The maximum selectable spin
speed depends on the model and on which programme is currently selected.
ʑAdditional functions aand overview of programmes, page 7
iSpeedPerfect Washes in a shorter time but with a washing outcome comparable to
that of the standard programme. Maximum load aOverview of
programmes, page 7.
jEcoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
S(Easy-iron) Special spin sequence with subsequent fluffing. Gentle Final spin at
reduced speed - residual moisture in the laundry slightly increased.
=(Water Plus) Increased water level. Gentler treatment of the laundry..
ʑChildproof lock and reloading
Childlock/
appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
Activation/Deactivation:After the programme has started/finished,
press and hold $Start/Reload for 5 seconds.
Note: the Childlock remains activated until the start of the next
programme, even after the machine has been switched off.
Then deactivate the Childlock after the machine has been switched
back on.
YES
Reload
If you want to add subsequent items of laundry after the programme
has started, press $Start/Reload. The machine checks whether
reloading is possible.
If YES lights up and $Start/Reload flashes, reloading is possible.
NO flashing: wait until YES lights up.
Note: do not open the door until YES lights up.
NO: reloading not possible.
Note: for safety reasons, the washing machine door remains locked
when the water level and/or temperature is high,
or during a spin cycle.
To continue the programme, press $Start/Reload.
aLF7I7LIF:ø/>c@$Ja>c$
aicLIFLF:ijS=c7:ijS=cI:ijS=c7LIF:ijS=cJ:cijS=:ijS=c:O:c@:c$:ijS=c>c
Downloaded From WashingMachine-Manual.com Manuals

c:c:cþüüccaaaʑʑ$
ʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFja~ʋʋʋ~aa$$$>$$a$$$ʑʑʑ$ʑccʑaiajS=ʑ$$$$aLF7I7LIF:ø/>c@$Ja>c$
7
Overview of programmes aCheck the consumption values table on page 8 and the instructions on page 9.
* reduced load with additional iSpeedPerfect function.
For a short programme,cLIFMix 40 °C with max. spin speed is ideal.
Programmes with no prewash - place detergent into compartment II, programmes with prewash - divide detergent between compartments Iand II.
Programmes °C max. Type of laundry Additional functions; options; notes
Cottons LF:- 90 °C
8 kg/
5 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen iSpeedPerfect*,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold)
+ Prewash 7Sensitive :- 60 °C Hard-wearing fabrics made of cotton or linen iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold); for particularly sensitive skin, longer washing at the selected temperature, higher water level, extra rinse
Easy-Care I:- 60 °C
3.5 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold)
+ Prewash 7Mix LIF:- 40 °C Fabrics made of cotton or easy-care fabrics iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold); different types of laundry can be washed together
Easy-Care + J:c- 40 °C Dark-coloured fabrics made of cotton and dark
easy-care fabrics iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
(Rinse Hold); reduced rinsing and Final spin
Delicate/Silk :- 40 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains) iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold); no spin cycles between the rinse cycles
:Wool O:- 40 °C Hand or machine-washable fabrics made of wool
or containing wool c(Rinse Hold); particularly gentle wash programme that prevents the laun-
dry from shrinking, longer programme breaks (fabrics rest in the detergent solution)
SuperQuick 15’ @:- 40 °C Easy-care fabrics made of cotton, linen,
synthetic fibres or blended fabrics c(Rinse Hold); short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Sports, Fitness $:- 40 °C Fabrics made from microfibre iSpeedPerfect,jEcoPerfect,S(Easy-iron),=(Water Plus),
c(Rinse Hold)
Additional programmes Rinse, Spin, >Empty, cReduced Spin
1209 / 9000506592 *506592* WAS24462BY
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
Downloaded From WashingMachine-Manual.com Manuals

8
Safety instructions
– Read the Instruction manual and Installation instructions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Only insert/pull out the mains plug with dry hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and putting their lives in
danger.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand before washing.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Additional function Load Electricity
consumption*** Water*** Programme
duration***
Cottons LF30 °C** 8 kg 0.35 kWh 76 l 2:20 h
Cottons LF40 °C** 8 kg 0.97 kWh 76 l 2:30 h
Cottons LF60 °C** 8 kg 1.47 kWh 76 l 2:40 h
Cottons LF60 °C jEcoPerfect*8 kg 1.03 kWh 56 l 3:25 h
Cottons LF90 °C 8 kg 2.34 kWh 87 l 2:30 h
Mix LIF40 °C** 3.5 kg 0.47 kWh 49 l 1:01 h
Easy-Care I40 °C** 3.5 kg 0.55 kWh 55 l 1:43 h
Delicate/Silk :c(cold) 2 kg 0.04 kWh 35 l 0:41 h
Delicate/Silk 30 °C 2 kg 0.14 kWh 35 l 0:41 h
:øWool O:c(cold) 2 kg 0.06 kWh 40 l 0:40 h
:øWoolüO30 °C 2 kg 0.16 kWh 40 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing with the currently valid version of EN60456.
Note for comparative testing: to test using the test programmes, wash using the specified load amount and maximum spin
speed.
Select the LIFMix 40 °C programme and maximum spin speed as the short programme for coloureds.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient
temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected
additional functions.
9
Important information
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap.
Add the following to compartment II:
– approx. 1 litre water
– detergent (dosage according to the manufacturer's instructions for light soiling and the
appropriate degree of water hardness)
Set the programme selector to Easy-Care 60 °C and select $Start/Reload.
At the end of the programme, turn the programme selector to Off.
Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Loading the laundry
Insert large and small items of laundry.
Take care not to trap items of laundry between the washing machine door and the rubber
seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light No prewash. The iSpeedPerfect function can also be selected if desired.
Pretreat any stains as necessary.
heavy Insert less laundry. Select Prewash with the programme.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to LFCottons 30 °C and press
$(Start/Reload). After approx. 10 minutes, press $Start/Reload to pause the pro-
gramme. Once the required soaking time has elapsed, press $Start/Reload again to
continue the programme, or select a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes using liquid starch. Pour the starch into
the ~fabric softener compartment according to the manufacturer's instructions (if necessary
clean it first).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions. Do not bleach laundry in the washing
machine.
7ʑʑʑaaaaa
>c>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑ0aʑLFʑ³þʑaaʑʑʑʑ$$aaʑaʑʑʑ
Downloaded From WashingMachine-Manual.com Manuals

LFLFLFLFjLFLIFI:c:øO:c:øüOLIF$iLF$$$~
10
Insert for liquid detergent model-dependent
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely -> page 10.
– Slide the insert forwards.
Do not use the insert (slide upwards):
– for gel detergents and washing powder,
– for programmes with 7+ Prewash or the (Finished in) option
Care
ʑMachine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert, push the insert up from below with
your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can
evaporate.
ʑDrum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
ʑDescaling Ensure there is no laundry in the machine
This is not necessary if the detergent is dosed correctly. However, if it is necessary, follow the
instructions of the descaler manufacturer. Suitable descaling products can be purchased
from our website or after-sales service (apage 13).
Information on the display panel depending on model
F: 16 Close the door properly; laundry may be trapped.
F: 17 , 29 Open the tap fully, supply hose kinked/trapped; clean the filter apage 11,
water pressure too low.
F: 18 Detergent solution pump blocked; clean detergent solution pump
apage 11.
Drainage hose/waste pipe blocked; clean the drain hose on the siphon
apage 11.
F: 23 Water in the base tub, appliance leaking. Call the after-sales service.
F: 34 Cannot lock washing machine door. Open the door and close it again so that
you can hear it "click"; switch the appliance off and on again; set the
programme and make individual settings; start the programme.
Other displays Switch off the appliance, wait 5 seconds and switch on again. If the same
display appears again, call the after-sales service apage 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off, disconnect the mains plug.
1. Open and remove the service flap.
2. Remove the drainage hose from its holder.
Remove the sealing cap and allow the solution to drain out.
Put the sealing cap back in place.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump housing
(the impeller in the detergent solution pump must be able to rotate).
5. Put the pump cover back in place and screw it tight. The handle
should stand vertically. Insert the drainage hose into its holder.
6. Refit the service flap and close it.
To prevent detergent from flowing down the drain unused during the next wash cycle:
pour 1 litre of water into compartment II and start the >Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off, disconnect the mains plug.
1. Loosen the hose clamp, remove the drainage hose carefully
(residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose
clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the AquaStop safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (apart from cSpin/ >Empty).
3. Press $Start/Reload. Allow the programme to run for approx.
40 seconds.
4. Turn the programme selector to Off. Remove the mains plug from
the socket.
To clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose from the back of the appliance,
Remove the filter using pliers and clean the filter.
6. Connect the hose and check for leaks.
Risk of scalding
– Allow the detergent solution to cool down.
– Turn off the tap.
ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑ0aʑLFʑ³þʑaaʑʑʑ
ʑ$$aaʑaʑʑʑ
Downloaded From WashingMachine-Manual.com Manuals

LFLFLFLFjLFLIFI:c:øO:c:øüOLIF$iLF$$$~7ʑʑʑaaaaaDisconnect the mains plug. >c>$
12
What to do if ...
ʑWater is leaking out. – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–$Start/Reload not selected?
– Tap not turned on?
– Filter may be blocked. Clean the filter apage 11.
– Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
– Safety function active. Programme terminated? apage 4.
–(Rinse Hold) = without Final spin selected? apage 3,4.
– Can be opened by emergency release only? apage 13.
ʑProgramme does not
start.
–$Start/Reload or (Finished in) time selected?
– Washing machine door closed?
– Childlock active? Deactivate it apage 5.
ʑDetergent solution does
not drain.
–(Rinse Hold) = without Final spin selected? apage 3,4.
– Clean the detergent solution pump apage 11.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault - water below the visible area.
ʑUnsatisfactory spin
result.
Laundry wet/too damp.
– Not a fault - the unbalanced-load detection system has cancelled
the spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the
drum.
–S(Easy-iron) selected? apage 5.
– Selected speed too low? apage 5.
ʑDrum spins gently
several times.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance.
ʑResidual water in the 0compartment for care
products.
– Not a fault - the action of the care product is not affected.
– Clean the insert if necessary apage 10.
ʑOdour formation in the
washing machine.
– Run the LFCottons 90 °C programme with no load inserted.
Use standard detergent.
ʑStatus display³þflashes.
Appliance has detected
a detergent overload.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre water and pour
into compartment II (not with outdoor or down fabrics).
– Reduce the detergent dosage for the next wash cycle.
ʑLoud spinning, vibrations
and “walking” during the
spin cycle.
– Appliance feet fixed?
Secure the appliance feet aInstallation instructions.
– Transport braces removed?
Remove the transport braces aInstallation instructions.
ʑDisplay panel/indicator
lamps do not function
during operation.
– Power cut?
– Circuit breakers tripped? Reset/replace the circuit breakers.
– If the fault occurs repeatedly, call the after-sales service.
ʑProgramme sequence
longer than usual.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance by repeatedly redistributing the laundry.
– Not a fault - foam detection system active - adds an additional
rinse cycle.
ʑDetergent residues on
the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues.
– Use the Rinse cycle or brush out the laundry after washing.
13
What to do if ...
ʑin Reload mode,
$Start/Reload flashes
very quickly and an
audible signal sounds
– Water level too high. Not possible to reload laundry.
Close door immediately if open.
– To continue the programme, press $Start/Reload.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales service apage 13.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is restored. However, if the laundry has to
be removed, the washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. Allow them to cool down.
Do not reach inside the drum if it is still turning.
Do not open the door if you can see water through the glass.
1. Turn the programme selector to Off and disconnect the mains
plug.
2. Drain the detergent solution apage 11.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑIf you cannot rectify the fault yourself (Troubleshooting apage 12, 13), please contact our
after-sales service. We will always find a suitable solution and will avoid a visit from a service
technician wherever possible.
ʑThe contact details for all countries can be found in the enclosed after-sales
service directory.
ʑPlease give the After-sales service the product number (E-Nr.) and the production number
(FD) of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machine door*/the
service flap* (after opening it) and the rear of
the appliance.
*depending on model
ʑRely on the professionalism of the manufacturer. Please contact us.
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your appliance.
Downloaded From WashingMachine-Manual.com Manuals

LFLFLFLFjLFLIFI:c:øO:c:øüOLIF$iLF$$$~7ʑʑʑaaaaaDisconnect the mains plug. >c>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑ0aʑLFʑ³þʑaaʑʑʑʑ$$aaʑaʑʑʑ
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before
operating the washing machine.
Downloaded From WashingMachine-Manual.com Manuals